lesLanType
CISCO-LES-MIB ·
.1.3.6.1.4.1.9.9.39.1.1.1.1.12
Object
column
r/w
Enumeration
The type of legacy LAN that this LES emulates.
Context
- MIB
- CISCO-LES-MIB
- OID
.1.3.6.1.4.1.9.9.39.1.1.1.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- lesEntry
- Table
- lesTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | dot3 |
2 | dot5 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lesElanName The name associated with the emulated LAN which this
LES services. | column | OctetString | .1.3.6.1.4.1.9.9.39.1.1.1.1.1 |
| lesColocBusAtmAddrActl The ATM address in use by the BUS. This object is a
product of the specified ATM address, its mask and
interaction with the switch through the ILMI. | column | LAN-EMULATION-CLIENT-MIBAtmLaneAddress | .1.3.6.1.4.1.9.9.39.1.1.1.1.10 |
| lesUpTime The value of sysUpTime when this LES became
activated. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.39.1.1.1.1.11 |
| lesMaxFrm The maximum frame size that the specified LAN type
can accept. | column | Enumeration | .1.3.6.1.4.1.9.9.39.1.1.1.1.13 |
| lesJoinTimeout The number of seconds that must elapse before a
Join request can be timed-out. | column | seconds Integer32 | .1.3.6.1.4.1.9.9.39.1.1.1.1.14 |
| lesLecsAtmAddr The ATM address associated with the LECS used by
this LES. If no LECS is in use by the LES then this
object will have the value of all 0's (i.e 0x0000...).
If it is desire… | column | LAN-EMULATION-CLIENT-MIBAtmLaneAddress | .1.3.6.1.4.1.9.9.39.1.1.1.1.15 |
| lesControlDistVpi The virtual path identifier of the control
distribute VCC to all clients, if it exits. | column | CISCO-BUS-MIBCiscoVpiInteger | .1.3.6.1.4.1.9.9.39.1.1.1.1.16 |
| lesControlDistVci The virtual channel identifier of the control
distribute VCC to all clients, if it exists. | column | CISCO-BUS-MIBCiscoVciInteger | .1.3.6.1.4.1.9.9.39.1.1.1.1.17 |
| lesOperStatus This object reflects the actual state of the LES
which may differ from that of the lesAdminStatus
object. This can occur when the interface
ifOperStatus is… | column | Enumeration | .1.3.6.1.4.1.9.9.39.1.1.1.1.18 |
| lesAdminStatus The desired state of the designated LES as
prescribed by the operator. The actions of the agent
will, if at all possible, eventually result in the
desired state bei… | column | Enumeration | .1.3.6.1.4.1.9.9.39.1.1.1.1.19 |
| lesIndex A unique identifier for this LES servicing this
ELAN. This value must remain constant while the entry
is in existence and during the operation of the agent
(i.e. It is al… | column | Integer32 | .1.3.6.1.4.1.9.9.39.1.1.1.1.2 |
| lesStatus The status of this entry (conceptual row). This row
cannot be set to active until an appropiate value of
lesIfIndex has been specified. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.39.1.1.1.1.20 |
| lesSegmentID The segment ID of the emulated LAN this LES is
servicing. This object is only valid if the
lesLanType is dot5(2). | column | Integer32 | .1.3.6.1.4.1.9.9.39.1.1.1.1.21 |
| lesAtmAddrSpec The ATM address of the designated LES. Note that
setting this object will have the side effect of
reinitializing the LES and consequently dropping all
clients connecte… | column | LAN-EMULATION-CLIENT-MIBAtmLaneAddress | .1.3.6.1.4.1.9.9.39.1.1.1.1.3 |
| lesAtmAddrMask An address mask that when used with the
lesAtmAddrSpec specifies the portion of the LES' ATM
address that is desired to be configured. Note that
setting this … | column | OctetString | .1.3.6.1.4.1.9.9.39.1.1.1.1.4 |
| lesAtmAddrActual The resultant ATM address in use by the LES. This
object is a product of the specified ATM address, mask
and interaction with the switch via the ILMI. | column | LAN-EMULATION-CLIENT-MIBAtmLaneAddress | .1.3.6.1.4.1.9.9.39.1.1.1.1.5 |
| lesIfIndex The interface that a LES will receive control
connections on. The value specified for this object
must equate to a value of ifIndex in the ifTable. The
interface will be for tha… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.39.1.1.1.1.6 |
| lesSubIfNum Specifies the sub-interface number that the LES
will reside on. This sub-interface may be shared with
a LEC or BUS of the same ELAN but is not required to
do so. If no v… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.39.1.1.1.1.7 |
| lesColocBusAtmAddrSpec For those implementations who do not allow the
separate creation/deletion of the LES and BUS this
object allows the operator to specify the ATM address
of the BUS at L… | column | LAN-EMULATION-CLIENT-MIBAtmLaneAddress | .1.3.6.1.4.1.9.9.39.1.1.1.1.8 |
| lesColocBusAtmAddrMask An address mask that when used with the
lesColocatedBusAtmAddr specifies the portion of the
BUS' ATM address desired by management. Note that
setting this obj… | column | OctetString | .1.3.6.1.4.1.9.9.39.1.1.1.1.9 |