lesAtmAddrSpec

CISCO-LES-MIB · .1.3.6.1.4.1.9.9.39.1.1.1.1.3
MIB view Table view

Object

column r/w LAN-EMULATION-CLIENT-MIBAtmLaneAddress 
The  ATM address of the   designated LES.  Note that
setting this object  will  have  the side  effect   of
reinitializing  the  LES and consequently dropping all
clients connected  to  it.   If  this  object is   not
specified    at row creation  time  then  the LES will
choose a value for itself and attempt to register with
the  switch    with  that value.   If    an address is
specified which is  not acceptable to the  switch then
the  lesOperStatus  will   remain  inactive  until  an
acceptable address is set.

Context

MIB
CISCO-LES-MIB
OID
.1.3.6.1.4.1.9.9.39.1.1.1.1.3
Type
column
Access
readwrite
Status
current
Parent
lesEntry
Table
lesTable
Siblings
20

Syntax

LAN-EMULATION-CLIENT-MIBAtmLaneAddress
Source
LAN-EMULATION-CLIENT-MIBAtmLaneAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 0 range: 20

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
lesElanName
The name associated with the emulated LAN which this LES services.
columnOctetString.1.3.6.1.4.1.9.9.39.1.1.1.1.1
lesColocBusAtmAddrActl
The ATM address in use by the BUS. This object is a product of the specified ATM address, its mask and interaction with the switch through the ILMI.
columnLAN-EMULATION-CLIENT-MIBAtmLaneAddress.1.3.6.1.4.1.9.9.39.1.1.1.1.10
lesUpTime
The value of sysUpTime when this LES became activated.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.9.9.39.1.1.1.1.11
lesLanType
The type of legacy LAN that this LES emulates.
columnEnumeration.1.3.6.1.4.1.9.9.39.1.1.1.1.12
lesMaxFrm
The maximum frame size that the specified LAN type can accept.
columnEnumeration.1.3.6.1.4.1.9.9.39.1.1.1.1.13
lesJoinTimeout
The number of seconds that must elapse before a Join request can be timed-out.
columnseconds Integer32.1.3.6.1.4.1.9.9.39.1.1.1.1.14
lesLecsAtmAddr
The ATM address associated with the LECS used by this LES. If no LECS is in use by the LES then this object will have the value of all 0's (i.e 0x0000...). If it is desire…
columnLAN-EMULATION-CLIENT-MIBAtmLaneAddress.1.3.6.1.4.1.9.9.39.1.1.1.1.15
lesControlDistVpi
The virtual path identifier of the control distribute VCC to all clients, if it exits.
columnCISCO-BUS-MIBCiscoVpiInteger.1.3.6.1.4.1.9.9.39.1.1.1.1.16
lesControlDistVci
The virtual channel identifier of the control distribute VCC to all clients, if it exists.
columnCISCO-BUS-MIBCiscoVciInteger.1.3.6.1.4.1.9.9.39.1.1.1.1.17
lesOperStatus
This object reflects the actual state of the LES which may differ from that of the lesAdminStatus object. This can occur when the interface ifOperStatus is…
columnEnumeration.1.3.6.1.4.1.9.9.39.1.1.1.1.18
lesAdminStatus
The desired state of the designated LES as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desired state bei…
columnEnumeration.1.3.6.1.4.1.9.9.39.1.1.1.1.19
lesIndex
A unique identifier for this LES servicing this ELAN. This value must remain constant while the entry is in existence and during the operation of the agent (i.e. It is al…
columnInteger32.1.3.6.1.4.1.9.9.39.1.1.1.1.2
lesStatus
The status of this entry (conceptual row). This row cannot be set to active until an appropiate value of lesIfIndex has been specified.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.9.9.39.1.1.1.1.20
lesSegmentID
The segment ID of the emulated LAN this LES is servicing. This object is only valid if the lesLanType is dot5(2).
columnInteger32.1.3.6.1.4.1.9.9.39.1.1.1.1.21
lesAtmAddrMask
An address mask that when used with the lesAtmAddrSpec specifies the portion of the LES' ATM address that is desired to be configured. Note that setting this …
columnOctetString.1.3.6.1.4.1.9.9.39.1.1.1.1.4
lesAtmAddrActual
The resultant ATM address in use by the LES. This object is a product of the specified ATM address, mask and interaction with the switch via the ILMI.
columnLAN-EMULATION-CLIENT-MIBAtmLaneAddress.1.3.6.1.4.1.9.9.39.1.1.1.1.5
lesIfIndex
The interface that a LES will receive control connections on. The value specified for this object must equate to a value of ifIndex in the ifTable. The interface will be for tha…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.39.1.1.1.1.6
lesSubIfNum
Specifies the sub-interface number that the LES will reside on. This sub-interface may be shared with a LEC or BUS of the same ELAN but is not required to do so. If no v…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.39.1.1.1.1.7
lesColocBusAtmAddrSpec
For those implementations who do not allow the separate creation/deletion of the LES and BUS this object allows the operator to specify the ATM address of the BUS at L…
columnLAN-EMULATION-CLIENT-MIBAtmLaneAddress.1.3.6.1.4.1.9.9.39.1.1.1.1.8
lesColocBusAtmAddrMask
An address mask that when used with the lesColocatedBusAtmAddr specifies the portion of the BUS' ATM address desired by management. Note that setting this obj…
columnOctetString.1.3.6.1.4.1.9.9.39.1.1.1.1.9