cl2natInstIpRange
CISCO-L2NAT-MIB ·
.1.3.6.1.4.1.9.9.806.1.8.1.8
Object
column
r/w
Integer32
This object specifies the number of addresses to be translated in case the value of cl2natIpAddressType is 'range'. This is not used for any other option.
Context
- MIB
- CISCO-L2NAT-MIB
- OID
.1.3.6.1.4.1.9.9.806.1.8.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cl2natInstIpInstanceIpEntry
- Table
- cl2natInstIpInstanceIpTable
- Siblings
- 9
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cl2natInstIpDirection This object specifies the direction in which an address is to
be translated. A value of 1 denotes that this entry is for
translating source IP address of packets going out of u… | column | Enumeration | .1.3.6.1.4.1.9.9.806.1.8.1.1 |
| cl2natInstIpRowStatus This object will follow RowStatus Textual convention
to create/destroy entries.
The following columnar objects are
mandatory to make the entry 'active':
cl2natInstIpDirect… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.806.1.8.1.10 |
| cl2natInstIpAddressType This object specifies the type of address that is used to
configure this translation. 'host' implies that this is a
single IP address translation for one host. 'range' implies
t… | column | Enumeration | .1.3.6.1.4.1.9.9.806.1.8.1.2 |
| cl2natInstIpFromIpAddressType The address type of cl2natFromIpAddress. This object specifies
whether this translation is for for IPv4 or IPv6. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.806.1.8.1.3 |
| cl2natInstIpFromIpAddress This object indicates the source IP address of packets going
out of the uplink before translation if the
cl2natInstIpDirection value for this entry is inside(1).
Th… | column | OctetString | .1.3.6.1.4.1.9.9.806.1.8.1.4 |
| cl2natInstIpToIpAddressType The address type of cl2natInstIpToIpAddress. This object
specifies whether this translation is for for IPv4 or IPv6. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.806.1.8.1.5 |
| cl2natInstIpToIpAddress This object indicates the Source IP address of packets going
out of the uplink after translation, and destination IP address
of packets coming in from the uplinks before translati… | column | OctetString | .1.3.6.1.4.1.9.9.806.1.8.1.6 |
| cl2natInstIpAddressMask This object specifies the subnet address mask when
the value of cl2natInstIpAddressType is 'network'. This is not
used for any other option. | column | CISCO-TCCiscoInetAddressMask | .1.3.6.1.4.1.9.9.806.1.8.1.7 |
| cl2natInstStorageIpStorageType This object specifies the storage type for this conceptual row.
The following columnar objects are allowed to be writable
when the storageType of this conceptual row is permanent… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.9.9.806.1.8.1.9 |