civrZoneQosPriority
CISCO-IVR-MIB ·
.1.3.6.1.4.1.9.9.371.1.1.3.2.1.8
Object
This object specifies if qos attribute for this
IV zone is enabled. If this object is set to a
value other than 'none', then qos attribute for this
IV zone is enabled. If this object is set to 'none',
then qos attribute for this IV zone is disabled.
If this attribute is enabled for this IV zone,
then only traffic with the configured priority
level will be allowed between the members of
this IV zone.
Context
- MIB
- CISCO-IVR-MIB
- OID
.1.3.6.1.4.1.9.9.371.1.1.3.2.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- civrZoneEntry
- Table
- civrZoneTable
- Siblings
- 6
Syntax
CISCO-ZS-MIBZoneQosPriorityLevel
- Source
- CISCO-ZS-MIBZoneQosPriorityLevel
- Base type
Enumeration
Values & Constraints
Type Values
1 | none |
2 | low |
3 | medium |
4 | high |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| civrZoneIndex The index of an IV Zone.
This object could have the same value as
civrZoneTableNextIndex. | column | Unsigned32 | .1.3.6.1.4.1.9.9.371.1.1.3.2.1.1 |
| civrZoneName The name of this zone. The zoneName should be
unique this device.
This object can not be modified while the
corresponding value of civrZoneRowStatus is
'active'.
… | column | OctetString | .1.3.6.1.4.1.9.9.371.1.1.3.2.1.2 |
| civrZoneMemberList The set of IV Zone members that form this IV zone.
The IV zone members are identified by
civrZoneMemberIndex object in the civrZoneMemberTable.
If … | column | CISCO-ZS-MIBFcList | .1.3.6.1.4.1.9.9.371.1.1.3.2.1.3 |
| civrZoneLastChange The value of sysUpTime at the time of the last
change to this IV zone entry. If the entry has not
been modified since the last re-initialization
of the local network management s… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.371.1.1.3.2.1.5 |
| civrZoneRowStatus The status of this conceptual row.
This object can not be set to 'active'
unless the corresponding value of zoneName
is unique on this device. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.371.1.1.3.2.1.6 |
| civrZoneReadOnly This object indicates if only SCSI read
operations are allowed on members of this
IV zone which are SCSI targets.
If this object is set to 'true', then only
SCSI re… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.371.1.1.3.2.1.7 |