cgrtRouteType

CISCO-ITP-GRT-MIB · .1.3.6.1.4.1.9.9.334.1.2.3.1.9

Object

column Enumeration

When summary or cluster routes are specified this field 
will provide additional information about the fully 
qualified routes within the specified clusters.  Since, 
summary or cluster routes represent a group of 
destinations it is necessary to collect and maintain 
status information on routes that are not available.  
Additional, route statements are created dynamically 
whenever a TFP or TFR is received on a fully qualified 
route represented by a defined summary route.  There are 
three four types of dynamic route as follows.
List of the possible route status values.
              
'unknown': Undefined type of route.
              
'static': A fully-qualified route configured by system
    administrator.
                  
'cluster': An ANSI cluster route.  A DPC and mask
    with length of 16 bits configured by system 
    administrator.
              
'summary': An DPC and a mask with length 0-10 for ITU and
    0-15,17-23 for ANSI. A summary route is configured by
    a system administrator. 
                  
                    
'xlist':  This route is dynamic and is create whenever TFP
    or TFR is received for a point-code represented by a 
    ANSI cluster route.  
                  
'shadow': When a TFP or TFR is received for a point-code 
    represented by a summary or cluster route all route
    statements specified for the summary or cluster 
    destination are copied.  These new routes appear
    under the specific fully-qualified destination.  
    The route will be marked as a shadow when a TFP or
    TFR has not been received for that particular route.
                  
'management' : When a TFP or TFR is received for a 
    point-code represented by a summary route all route 
    statements specified for the summary destination are 
    copied.  The new routes appear under the 
    fully-qualified destination specified in the TFR or 
    TFP.  The route specified in the TFR or TFP will be 
    marked as a dynamic to indicate that MTP3 route 
    management information is available for this route.
                  
'alias': Route statement is created in response
    to conversion statements defined to alias point-codes
    across networks.

Context

MIB: CISCO-ITP-GRT-MIB
OID: .1.3.6.1.4.1.9.9.334.1.2.3.1.9
Type: column
Access: readonly
Status: current
Parent: cgrtRouteEntry
Table: cgrtRouteTable
Siblings: 14

Syntax

Enumeration

Values & Constraints

Enumerated Values

`0`	unknown
`1`	static
`2`	cluster
`3`	summary
`4`	xlist
`5`	shadow
`6`	management
`7`	alias

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cgrtRouteDpc The destination point code.	column	CISCO-ITP-TC-MIBCItpTcPointCode	`.1.3.6.1.4.1.9.9.334.1.2.3.1.1`
cgrtRouteAdminStatus List of the possible administration route status values. 'none' : none. 'unknown' : Status can not be determined. 'available' : Route is available. 'rest…	column	Enumeration	`.1.3.6.1.4.1.9.9.334.1.2.3.1.10`
cgrtRouteRowStatus The object is used by a management station to create, modify or delete the row entry in cgspPointCodeTable following the RowStatus textual convention. The only object available…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.9.334.1.2.3.1.11`
cgrtRouteAllowedSeconds Duration in seconds during which forwarding was allowed for this route.	column	seconds SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.334.1.2.3.1.12`
cgrtRouteRestrictedSeconds Duration in seconds during which forwarding was restricted for this route.	column	seconds SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.334.1.2.3.1.13`
cgrtRouteProhibitedSeconds Duration in seconds during which forwarding was prohibited for this route.	column	seconds SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.334.1.2.3.1.14`
cgrtRouteDisplay The destination point code associated with the route in display format.	column	CISCO-ITP-TC-MIBCItpTcDisplayPC	`.1.3.6.1.4.1.9.9.334.1.2.3.1.15`
cgrtRouteMask The mask used to define which part of cgrtRouteDpc is significant when comparing the cgrtRouteDpc to the destination code point in the packet to be routed.	column	Unsigned32	`.1.3.6.1.4.1.9.9.334.1.2.3.1.2`
cgrtRouteDestLsCost The cost assigned to this linkset matching this route. Higher numbers represent higher cost.	column	Unsigned32	`.1.3.6.1.4.1.9.9.334.1.2.3.1.3`
cgrtRouteDestLinkset The linkset that the packet is to be forwarded to on matching this route.	column	CISCO-ITP-TC-MIBCItpTcLinksetId	`.1.3.6.1.4.1.9.9.334.1.2.3.1.4`
cgrtRouteQos The quality of service classification to be assigned to the IP packets used to transport the SS7 messages. The value to specify for packets when they will be transported on SCTP/…	column	CISCO-ITP-TC-MIBCItpTcQos	`.1.3.6.1.4.1.9.9.334.1.2.3.1.5`
cgrtRouteStatus List of the possible route status values. These values are determine using the status of the linkset specified in this route and the route management status. 'u…	column	Enumeration	`.1.3.6.1.4.1.9.9.334.1.2.3.1.6`
cgrtRouteMgmtStatus List of the possible route management route status values. Route management status are received in transfer-allowed(TFA), transfer-prohibited(TFP), transfer-restricted(TFR), t…	column	Enumeration	`.1.3.6.1.4.1.9.9.334.1.2.3.1.7`
cgrtRouteDynamic Routes are either static or dynamic. Static routes are created based on configuration information specified by an administrator. Dynamic routes are created as a by product of a…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.334.1.2.3.1.8`