cItpAclParameters

The cItpAclType object indicates which types of tests 
will be processed on the each access list entry.
Each may contain one or more filters. The filter will
be processed ascending order(si,dpc...all). Each test 
is evaluated and if true the packet is processed
according to cItpAclAction. 
              
'si'      : The cItpAclSi is the relevant column. The packet
           is compared to cItpAclSi to determine if the 
           packet matches this filter.
                         
'dpc'     : The cItpAclDpc and cItpAclDpcMask are the relevant
           columns. The packet is compared to cItpAclDpc
           in conjunction with cItpAclDpcMask to determine
           if the packet matches this access control.
           The mask is first negated (~mask) and bitwise
           AND is perform with mask and dpc.
                         
'dpcMask' : Indicates that a mask is to be applied when the
           dpc filter is specified. If the mask is not 
           specified then the mask is assumed to be all 
           zeros.
                     
'opc'     : cItpAclOpc and cItpAclOpcMask are the relevant
           columns. The packet is compared to cItpAclOpc
           in conjunction with cItpAclOpcMask to determine
           if the packet matches this access control.
           The mask is first negated (~mask) and bitwise
           AND is perform with mask and opc.
                         
'opcMask' : Indicates that a mask is to be applied when the
           opc filter is specified. If the mask is not 
           specified then the mask is assumed to be all 
           zeros.
                     
'pattern' : cItpAclPattern and cItpAclOffset are the 
           relevant columns. The matching criteria is 
           based on matching the pattern specified by 
           cItpAclPattern at offset cItpAclOffset from 
           the start of the packet.
                         
              
'comment' : The cItpAclComment object provides an entry 
           that can be used to describe filters.
                          
'cgpa'    : The cItpAclCgpa, cItpAclCgpaMask, 
           cItpAclCgpaSsn and cItpAclCgpaSsnMask are the
           relevant columns.  The Calling Party Point code
           is compare with cItpAclCgpaPC using the 
           ItpAclCgpaMask. Also, the cItpAclCgpaSsn 
           and cItpAclCgpaSsnMask are compared if specified.
                         
'cgpaMask': Indicates that a mask is to be applied when the
           cgpa filter is specified. If the mask is not 
           specified then the mask is assumed to be all 
           zeros.
                         
'cgpaSsn' : Indicates that a Subsystem Number(SSN) is to
           be checked when the cgpa filter is specified. 
                         
'cgpaSsnMask': Indicates that SSN mask is to be applied 
           when checking the SSN number for the cgpa 
           filter is specified. If the mask is not 
           specified then the mask is assumed to be all 
           zeros.
                         
'cdpa'    : The cItpAclCdpa, cItpAclCdpaMask, 
           cItpAclCdpaSsn and cItpAclCdpaSsnMask are the
           relevant columns.  The Called Party Point code
           is compared with cItpAclCcpa using the 
           ItpAclCcpaMask. Also, the cItpAclCcpaSsn 
           and cItpAclCcpaSsnMask are compared if specified.
                         
'cdpaMask': Indicates that a mask is to be applied when the
           cdpa filter is specified. If the mask is not 
           specified then the mask is assumed to be all 
           zeros.
                         
'cdpaSsn' : Indicates that a SSN is to be checked when the
           cdpa filter is specified. 
                         
'cdpaSsnMask': Indicates that SSN mask is to be applied 
           when checking the SSN number for the cdpa 
           filter is specified. If the mask is not 
           specified then the mask is assumed to be all 
           zeros.
              
'selector': The Global Title Selector is used to select 
           which objects will be tested and in what order
           the tests will be applied as follows.
                                                             x
           The types of translations are different based on 
           the variant. In both, variants the translation 
           type and other parameters are used to provide the 
           following types of translations.
                         
           - Intermediate GTT resulting in MSUs routed to a 
             solitary point code
                           
           - Intermediate GTT resulting in MSUs load 
             balanced across two or more point codes
                           
           - Final GTT routed to a solitary point code
                         
           - Final GTT routed to a primary and backup 
             point-code and SSN (dominant mode)
                           
           - Final GTT load balanced across a group of 
             point-codes and subsystems
                           
           For ANSI the translation types are defined in 
           TABLE B.1/T1.112.3 of TR-NWT-000246.  The ANSI 
           selector table may be a simple flat table/array of 
           256 Translation Types(0-255).  In this method of 
           translation tables can be directly accessed using 
           the translation type from the Called Party Point 
           Code.  
                         
           For ITU section 2.4.5 of ITU-T Q.714, defines the 
           use of the Global Tile Indicator(GTI), along with 
           Translation Type(TT), Network Plan(NP), and Nature 
           of Address Indicator(NAI), as selectors for the 
           table to perform the Global Title 
           Translation(GTT).  In this cae the selector table 
           must be searched using a combination oF GTI, TT, 
           NP and NAI.  
                         
           The objects cItpAclGtiSelector, 
           cItpAclGtiTranslateType, cItpAclGtiNumberingPlan, 
           cItpAclGtiNai, and cItpAclGtiEsv are the relevant 
           columns.  These object will be used in the 
           following order based on variant and translation 
           type.  
                         
           1 => cItpAclGtiNai
           2 => cItpAclGtiTranslateType
           3 => cItpAclGtiTranslateType
                    cItpAclGtiNumberingPlan
                        cItpAclGtiEsv
           4 => cItpAclGtiTranslateType
                    cItpAclGtiNumberingPlan
                        cItpAclGtiNai
                             cItpAclGtiEsv
                     
                                               
'aft'    :  The cItpAclAft, cItpAclAftMask, 
           cItpAclAftSsn and cItpAclAftSsnMask are the
           relevant columns.  The affected point code is 
           compared with cItpAclAftPC using the 
           ItpAclAftMask. Also, the cItpAclAftSsn 
           and cItpAclAftSsnMask are compared if 
           specified.
                         
'aftMask':  Indicates that a mask is to be applied when the
           aft filter is specified. If the mask is not 
           specified then the mask is assumed to be all 
           zeros.
                         
'all'    :  Used in conjunction with cItpAclAction to specify
           defaults for packet that did not match any 
           specified access list entry.

MIB

CISCO-ITP-ACL-MIB

OID

.1.3.6.1.4.1.9.9.227.1.2.1.1.5

Type

column

Access

readwrite

Status

current

Parent

cItpAclTableEntry

Table

cItpAclTable

Siblings

30