cIscsiNodeIndex
CISCO-ISCSI-MIB ·
.1.3.6.1.4.1.9.10.94.1.6.1.1.1
Object
column
Unsigned32
An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system.
Context
- MIB
- CISCO-ISCSI-MIB
- OID
.1.3.6.1.4.1.9.10.94.1.6.1.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- cIscsiNodeAttributesEntry
- Table
- cIscsiNodeAttributesTable
- Siblings
- 16
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cIscsiNodeFirstBurstSize The maximum length (bytes) supported for unsolicited data
to/from this node. | column | bytes Unsigned32 | .1.3.6.1.4.1.9.10.94.1.6.1.1.10 |
| cIscsiNodeMaxBurstSize The maximum number of bytes which can be sent within a single
sequence of Data-In or Data-Out PDUs. | column | bytes Unsigned32 | .1.3.6.1.4.1.9.10.94.1.6.1.1.11 |
| cIscsiNodeMaxConnections The maximum number of connections allowed in each
session to and/or from this node. | column | connections Unsigned32 | .1.3.6.1.4.1.9.10.94.1.6.1.1.12 |
| cIscsiNodeDataSequenceInOrder The DataSequenceInOrder preference of this node.
False (=No) indicates that iSCSI data PDU sequences may
be transferred in any order. True (=Yes) indicates that
data PDU sequence… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.94.1.6.1.1.13 |
| cIscsiNodeDataPduInOrder The DataPDUInOrder preference of this node.
False (=No) indicates that iSCSI data PDUs within sequences
may be in any order. True (=Yes) indicates that data PDUs
within sequences… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.94.1.6.1.1.14 |
| cIscsiNodeDefaultTime2Wait The DefaultTime2Wait preference of this node.
This is the minimum time, in seconds, to wait before attempting
an explicit/implicit logout or active task reassignment after
an unex… | column | Unsigned32 | .1.3.6.1.4.1.9.10.94.1.6.1.1.15 |
| cIscsiNodeDefaultTime2Retain The DefaultTime2Retain preference of this node.
This is the maximum time, in seconds after an initial wait
(Time2Wait), before which an active task reassignment is still
possible … | column | Unsigned32 | .1.3.6.1.4.1.9.10.94.1.6.1.1.16 |
| cIscsiNodeErrorRecoveryLevel The ErrorRecoveryLevel preference of this node.
Currently, only 0-2 are valid.
This object is designed to accommodate future error recover
levels.
Higher error recovery levels imp… | column | Unsigned32 | .1.3.6.1.4.1.9.10.94.1.6.1.1.17 |
| cIscsiNodeName A character string that is a globally unique identifier for
this iSCSI node. The node name is independent of the location
of the node, and can be resolved into a set of address… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.10.94.1.6.1.1.2 |
| cIscsiNodeAlias A character string that is a human-readable name or description
of the iSCSI node. If configured, this alias may be
communicated to the initiator or target node at the remote en… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.10.94.1.6.1.1.3 |
| cIscsiNodeRoles A node can operate as in one or both of two roles:
a target role and/or an initiator role. | column | Bits | .1.3.6.1.4.1.9.10.94.1.6.1.1.4 |
| cIscsiNodeTransportType A pointer to the corresponding scsiTrnspt object in the
CISCO-SCSI-MIB (which in turn points to this iSCSI node)
allowing management stations to locate the SCSI-level Device
tha… | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.9.10.94.1.6.1.1.5 |
| cIscsiNodeInitialR2T This object indicates InitialR2T preference for this node -
True = YES,
False = will try to negotiate NO, will accept YES | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.94.1.6.1.1.6 |
| cIscsiNodeBidiInitialR2T This object indicates BidiInitialR2T preference for this node-
True = YES,
False = will try to negotiate NO, will accept YES | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.94.1.6.1.1.7 |
| cIscsiNodeImmediateData This object indicates ImmediateData preference for this node
True = YES (but will accept NO),
False = NO | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.94.1.6.1.1.8 |
| cIscsiNodeMaxOutstandingR2T Maximum number of outstanding R2Ts allowed per task. | column | Unsigned32 | .1.3.6.1.4.1.9.10.94.1.6.1.1.9 |