cIscsiNodeErrorRecoveryLevel
CISCO-ISCSI-MIB ·
.1.3.6.1.4.1.9.10.94.1.6.1.1.17
Object
column
r/w
Unsigned32
The ErrorRecoveryLevel preference of this node. Currently, only 0-2 are valid. This object is designed to accommodate future error recover levels. Higher error recovery levels imply support in addition to support for the lower error level functions. In otherwords, error level 2 implies support for levels 0-1, since those functions are subsets of error level 2.
Context
- MIB
- CISCO-ISCSI-MIB
- OID
.1.3.6.1.4.1.9.10.94.1.6.1.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cIscsiNodeAttributesEntry
- Table
- cIscsiNodeAttributesTable
- Siblings
- 16
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cIscsiNodeIndex An arbitrary integer used to uniquely identify a particular
node within an iSCSI instance present on the local system. | column | Unsigned32 | .1.3.6.1.4.1.9.10.94.1.6.1.1.1 |
| cIscsiNodeFirstBurstSize The maximum length (bytes) supported for unsolicited data
to/from this node. | column | bytes Unsigned32 | .1.3.6.1.4.1.9.10.94.1.6.1.1.10 |
| cIscsiNodeMaxBurstSize The maximum number of bytes which can be sent within a single
sequence of Data-In or Data-Out PDUs. | column | bytes Unsigned32 | .1.3.6.1.4.1.9.10.94.1.6.1.1.11 |
| cIscsiNodeMaxConnections The maximum number of connections allowed in each
session to and/or from this node. | column | connections Unsigned32 | .1.3.6.1.4.1.9.10.94.1.6.1.1.12 |
| cIscsiNodeDataSequenceInOrder The DataSequenceInOrder preference of this node.
False (=No) indicates that iSCSI data PDU sequences may
be transferred in any order. True (=Yes) indicates that
data PDU sequence… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.94.1.6.1.1.13 |
| cIscsiNodeDataPduInOrder The DataPDUInOrder preference of this node.
False (=No) indicates that iSCSI data PDUs within sequences
may be in any order. True (=Yes) indicates that data PDUs
within sequences… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.94.1.6.1.1.14 |
| cIscsiNodeDefaultTime2Wait The DefaultTime2Wait preference of this node.
This is the minimum time, in seconds, to wait before attempting
an explicit/implicit logout or active task reassignment after
an unex… | column | Unsigned32 | .1.3.6.1.4.1.9.10.94.1.6.1.1.15 |
| cIscsiNodeDefaultTime2Retain The DefaultTime2Retain preference of this node.
This is the maximum time, in seconds after an initial wait
(Time2Wait), before which an active task reassignment is still
possible … | column | Unsigned32 | .1.3.6.1.4.1.9.10.94.1.6.1.1.16 |
| cIscsiNodeName A character string that is a globally unique identifier for
this iSCSI node. The node name is independent of the location
of the node, and can be resolved into a set of address… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.10.94.1.6.1.1.2 |
| cIscsiNodeAlias A character string that is a human-readable name or description
of the iSCSI node. If configured, this alias may be
communicated to the initiator or target node at the remote en… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.10.94.1.6.1.1.3 |
| cIscsiNodeRoles A node can operate as in one or both of two roles:
a target role and/or an initiator role. | column | Bits | .1.3.6.1.4.1.9.10.94.1.6.1.1.4 |
| cIscsiNodeTransportType A pointer to the corresponding scsiTrnspt object in the
CISCO-SCSI-MIB (which in turn points to this iSCSI node)
allowing management stations to locate the SCSI-level Device
tha… | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.9.10.94.1.6.1.1.5 |
| cIscsiNodeInitialR2T This object indicates InitialR2T preference for this node -
True = YES,
False = will try to negotiate NO, will accept YES | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.94.1.6.1.1.6 |
| cIscsiNodeBidiInitialR2T This object indicates BidiInitialR2T preference for this node-
True = YES,
False = will try to negotiate NO, will accept YES | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.94.1.6.1.1.7 |
| cIscsiNodeImmediateData This object indicates ImmediateData preference for this node
True = YES (but will accept NO),
False = NO | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.94.1.6.1.1.8 |
| cIscsiNodeMaxOutstandingR2T Maximum number of outstanding R2Ts allowed per task. | column | Unsigned32 | .1.3.6.1.4.1.9.10.94.1.6.1.1.9 |