cIscsiNodeDefaultTime2Wait

CISCO-ISCSI-MIB · .1.3.6.1.4.1.9.10.94.1.6.1.1.15
MIB view Table view

Object

column r/w Unsigned32 
The DefaultTime2Wait preference of this node.
This is the minimum time, in seconds, to wait before attempting
an explicit/implicit logout or active task reassignment after
an unexpected connection termination or a connection reset.

Context

MIB
CISCO-ISCSI-MIB
OID
.1.3.6.1.4.1.9.10.94.1.6.1.1.15
Type
column
Access
readwrite
Status
current
Parent
cIscsiNodeAttributesEntry
Table
cIscsiNodeAttributesTable
Siblings
16

Syntax

Unsigned32

Values & Constraints

Object Constraints
range: 0-3600

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cIscsiNodeIndex
An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system.
columnUnsigned32.1.3.6.1.4.1.9.10.94.1.6.1.1.1
cIscsiNodeFirstBurstSize
The maximum length (bytes) supported for unsolicited data to/from this node.
columnbytes Unsigned32.1.3.6.1.4.1.9.10.94.1.6.1.1.10
cIscsiNodeMaxBurstSize
The maximum number of bytes which can be sent within a single sequence of Data-In or Data-Out PDUs.
columnbytes Unsigned32.1.3.6.1.4.1.9.10.94.1.6.1.1.11
cIscsiNodeMaxConnections
The maximum number of connections allowed in each session to and/or from this node.
columnconnections Unsigned32.1.3.6.1.4.1.9.10.94.1.6.1.1.12
cIscsiNodeDataSequenceInOrder
The DataSequenceInOrder preference of this node. False (=No) indicates that iSCSI data PDU sequences may be transferred in any order. True (=Yes) indicates that data PDU sequence…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.10.94.1.6.1.1.13
cIscsiNodeDataPduInOrder
The DataPDUInOrder preference of this node. False (=No) indicates that iSCSI data PDUs within sequences may be in any order. True (=Yes) indicates that data PDUs within sequences…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.10.94.1.6.1.1.14
cIscsiNodeDefaultTime2Retain
The DefaultTime2Retain preference of this node. This is the maximum time, in seconds after an initial wait (Time2Wait), before which an active task reassignment is still possible …
columnUnsigned32.1.3.6.1.4.1.9.10.94.1.6.1.1.16
cIscsiNodeErrorRecoveryLevel
The ErrorRecoveryLevel preference of this node. Currently, only 0-2 are valid. This object is designed to accommodate future error recover levels. Higher error recovery levels imp…
columnUnsigned32.1.3.6.1.4.1.9.10.94.1.6.1.1.17
cIscsiNodeName
A character string that is a globally unique identifier for this iSCSI node. The node name is independent of the location of the node, and can be resolved into a set of address…
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.10.94.1.6.1.1.2
cIscsiNodeAlias
A character string that is a human-readable name or description of the iSCSI node. If configured, this alias may be communicated to the initiator or target node at the remote en…
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.10.94.1.6.1.1.3
cIscsiNodeRoles
A node can operate as in one or both of two roles: a target role and/or an initiator role.
columnBits.1.3.6.1.4.1.9.10.94.1.6.1.1.4
cIscsiNodeTransportType
A pointer to the corresponding scsiTrnspt object in the CISCO-SCSI-MIB (which in turn points to this iSCSI node) allowing management stations to locate the SCSI-level Device tha…
columnSNMPv2-TCRowPointer.1.3.6.1.4.1.9.10.94.1.6.1.1.5
cIscsiNodeInitialR2T
This object indicates InitialR2T preference for this node - True = YES, False = will try to negotiate NO, will accept YES
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.10.94.1.6.1.1.6
cIscsiNodeBidiInitialR2T
This object indicates BidiInitialR2T preference for this node- True = YES, False = will try to negotiate NO, will accept YES
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.10.94.1.6.1.1.7
cIscsiNodeImmediateData
This object indicates ImmediateData preference for this node True = YES (but will accept NO), False = NO
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.10.94.1.6.1.1.8
cIscsiNodeMaxOutstandingR2T
Maximum number of outstanding R2Ts allowed per task.
columnUnsigned32.1.3.6.1.4.1.9.10.94.1.6.1.1.9