cIscsiNodeDefaultTime2Retain

CISCO-ISCSI-MIB · .1.3.6.1.4.1.9.10.94.1.6.1.1.16
MIB view Table view

Object

column r/w Unsigned32 
The DefaultTime2Retain preference of this node.
This is the maximum time, in seconds after an initial wait
(Time2Wait), before which an active task reassignment is still
possible after an unexpected connection termination or a
connection reset.

Context

MIB
CISCO-ISCSI-MIB
OID
.1.3.6.1.4.1.9.10.94.1.6.1.1.16
Type
column
Access
readwrite
Status
current
Parent
cIscsiNodeAttributesEntry
Table
cIscsiNodeAttributesTable
Siblings
16

Syntax

Unsigned32

Values & Constraints

Object Constraints
range: 0-3600

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cIscsiNodeIndex
An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system.
columnUnsigned32.1.3.6.1.4.1.9.10.94.1.6.1.1.1
cIscsiNodeFirstBurstSize
The maximum length (bytes) supported for unsolicited data to/from this node.
columnbytes Unsigned32.1.3.6.1.4.1.9.10.94.1.6.1.1.10
cIscsiNodeMaxBurstSize
The maximum number of bytes which can be sent within a single sequence of Data-In or Data-Out PDUs.
columnbytes Unsigned32.1.3.6.1.4.1.9.10.94.1.6.1.1.11
cIscsiNodeMaxConnections
The maximum number of connections allowed in each session to and/or from this node.
columnconnections Unsigned32.1.3.6.1.4.1.9.10.94.1.6.1.1.12
cIscsiNodeDataSequenceInOrder
The DataSequenceInOrder preference of this node. False (=No) indicates that iSCSI data PDU sequences may be transferred in any order. True (=Yes) indicates that data PDU sequence…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.10.94.1.6.1.1.13
cIscsiNodeDataPduInOrder
The DataPDUInOrder preference of this node. False (=No) indicates that iSCSI data PDUs within sequences may be in any order. True (=Yes) indicates that data PDUs within sequences…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.10.94.1.6.1.1.14
cIscsiNodeDefaultTime2Wait
The DefaultTime2Wait preference of this node. This is the minimum time, in seconds, to wait before attempting an explicit/implicit logout or active task reassignment after an unex…
columnUnsigned32.1.3.6.1.4.1.9.10.94.1.6.1.1.15
cIscsiNodeErrorRecoveryLevel
The ErrorRecoveryLevel preference of this node. Currently, only 0-2 are valid. This object is designed to accommodate future error recover levels. Higher error recovery levels imp…
columnUnsigned32.1.3.6.1.4.1.9.10.94.1.6.1.1.17
cIscsiNodeName
A character string that is a globally unique identifier for this iSCSI node. The node name is independent of the location of the node, and can be resolved into a set of address…
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.10.94.1.6.1.1.2
cIscsiNodeAlias
A character string that is a human-readable name or description of the iSCSI node. If configured, this alias may be communicated to the initiator or target node at the remote en…
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.10.94.1.6.1.1.3
cIscsiNodeRoles
A node can operate as in one or both of two roles: a target role and/or an initiator role.
columnBits.1.3.6.1.4.1.9.10.94.1.6.1.1.4
cIscsiNodeTransportType
A pointer to the corresponding scsiTrnspt object in the CISCO-SCSI-MIB (which in turn points to this iSCSI node) allowing management stations to locate the SCSI-level Device tha…
columnSNMPv2-TCRowPointer.1.3.6.1.4.1.9.10.94.1.6.1.1.5
cIscsiNodeInitialR2T
This object indicates InitialR2T preference for this node - True = YES, False = will try to negotiate NO, will accept YES
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.10.94.1.6.1.1.6
cIscsiNodeBidiInitialR2T
This object indicates BidiInitialR2T preference for this node- True = YES, False = will try to negotiate NO, will accept YES
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.10.94.1.6.1.1.7
cIscsiNodeImmediateData
This object indicates ImmediateData preference for this node True = YES (but will accept NO), False = NO
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.10.94.1.6.1.1.8
cIscsiNodeMaxOutstandingR2T
Maximum number of outstanding R2Ts allowed per task.
columnUnsigned32.1.3.6.1.4.1.9.10.94.1.6.1.1.9