cIscsiNodeAlias

CISCO-ISCSI-MIB · .1.3.6.1.4.1.9.10.94.1.6.1.1.3

MIB view Table view

Object

column SNMP-FRAMEWORK-MIBSnmpAdminString

A character string that is a human-readable name or description
of the iSCSI node.  If configured, this alias may be 
communicated to the initiator or target node at the remote end 
of the connection during a Login Request or Response message.  
This string is not used as an identifier, but can be displayed 
by the system's user interface in a list of initiators and/or 
targets to which it is connected.
              
If no alias is configured, this object is a zero-length string.

Context

MIB: CISCO-ISCSI-MIB
OID: .1.3.6.1.4.1.9.10.94.1.6.1.1.3
Type: column
Access: readonly
Status: current
Parent: cIscsiNodeAttributesEntry
Table: cIscsiNodeAttributesTable
Siblings: 16

Syntax

SNMP-FRAMEWORK-MIBSnmpAdminString

Source: SNMP-FRAMEWORK-MIBSnmpAdminString
Base type: OctetString

Values & Constraints

Type Constraints

range: 0..255

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cIscsiNodeIndex An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system.	column	Unsigned32	`.1.3.6.1.4.1.9.10.94.1.6.1.1.1`
cIscsiNodeFirstBurstSize The maximum length (bytes) supported for unsolicited data to/from this node.	column	bytes Unsigned32	`.1.3.6.1.4.1.9.10.94.1.6.1.1.10`
cIscsiNodeMaxBurstSize The maximum number of bytes which can be sent within a single sequence of Data-In or Data-Out PDUs.	column	bytes Unsigned32	`.1.3.6.1.4.1.9.10.94.1.6.1.1.11`
cIscsiNodeMaxConnections The maximum number of connections allowed in each session to and/or from this node.	column	connections Unsigned32	`.1.3.6.1.4.1.9.10.94.1.6.1.1.12`
cIscsiNodeDataSequenceInOrder The DataSequenceInOrder preference of this node. False (=No) indicates that iSCSI data PDU sequences may be transferred in any order. True (=Yes) indicates that data PDU sequence…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.10.94.1.6.1.1.13`
cIscsiNodeDataPduInOrder The DataPDUInOrder preference of this node. False (=No) indicates that iSCSI data PDUs within sequences may be in any order. True (=Yes) indicates that data PDUs within sequences…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.10.94.1.6.1.1.14`
cIscsiNodeDefaultTime2Wait The DefaultTime2Wait preference of this node. This is the minimum time, in seconds, to wait before attempting an explicit/implicit logout or active task reassignment after an unex…	column	Unsigned32	`.1.3.6.1.4.1.9.10.94.1.6.1.1.15`
cIscsiNodeDefaultTime2Retain The DefaultTime2Retain preference of this node. This is the maximum time, in seconds after an initial wait (Time2Wait), before which an active task reassignment is still possible …	column	Unsigned32	`.1.3.6.1.4.1.9.10.94.1.6.1.1.16`
cIscsiNodeErrorRecoveryLevel The ErrorRecoveryLevel preference of this node. Currently, only 0-2 are valid. This object is designed to accommodate future error recover levels. Higher error recovery levels imp…	column	Unsigned32	`.1.3.6.1.4.1.9.10.94.1.6.1.1.17`
cIscsiNodeName A character string that is a globally unique identifier for this iSCSI node. The node name is independent of the location of the node, and can be resolved into a set of address…	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.10.94.1.6.1.1.2`
cIscsiNodeRoles A node can operate as in one or both of two roles: a target role and/or an initiator role.	column	Bits	`.1.3.6.1.4.1.9.10.94.1.6.1.1.4`
cIscsiNodeTransportType A pointer to the corresponding scsiTrnspt object in the CISCO-SCSI-MIB (which in turn points to this iSCSI node) allowing management stations to locate the SCSI-level Device tha…	column	SNMPv2-TCRowPointer	`.1.3.6.1.4.1.9.10.94.1.6.1.1.5`
cIscsiNodeInitialR2T This object indicates InitialR2T preference for this node - True = YES, False = will try to negotiate NO, will accept YES	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.10.94.1.6.1.1.6`
cIscsiNodeBidiInitialR2T This object indicates BidiInitialR2T preference for this node- True = YES, False = will try to negotiate NO, will accept YES	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.10.94.1.6.1.1.7`
cIscsiNodeImmediateData This object indicates ImmediateData preference for this node True = YES (but will accept NO), False = NO	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.10.94.1.6.1.1.8`
cIscsiNodeMaxOutstandingR2T Maximum number of outstanding R2Ts allowed per task.	column	Unsigned32	`.1.3.6.1.4.1.9.10.94.1.6.1.1.9`