cipslaUdpEchoTmplDistBuckets
CISCO-IPSLA-ECHO-MIB ·
.1.3.6.1.4.1.9.9.636.1.2.1.17
Object
column
r/w
Unsigned32
The maximum number of statistical distribution
buckets to accumulate.
Since this index does not rollover, only the first
cipslaUdpEchoTmplStatsNumDistBuckets will be kept.
The last cipslaUdpEchoTmplStatsNumDistBuckets will
contain all entries from its distribution interval
start point to infinity.
Context
- MIB
- CISCO-IPSLA-ECHO-MIB
- OID
.1.3.6.1.4.1.9.9.636.1.2.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cipslaUdpEchoTmplEntry
- Table
- cipslaUdpEchoTmplTable
- Siblings
- 19
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-20
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cipslaUdpEchoTmplName A string which specifies the UDP echo template name. | column | OctetString | .1.3.6.1.4.1.9.9.636.1.2.1.1 |
| cipslaUdpEchoTmplTOS This object represents the type of service octet in an
IP header. | column | Unsigned32 | .1.3.6.1.4.1.9.9.636.1.2.1.10 |
| cipslaUdpEchoTmplVrfName This field is used to specify the VRF name with
which the IP SLA operation will be used. For regular IP SLA
operation this field should not be configured. The agent
will use this … | column | OctetString | .1.3.6.1.4.1.9.9.636.1.2.1.11 |
| cipslaUdpEchoTmplThreshold This object defines an administrative threshold limit.
If the IP SLA operation time exceeds this limit and if the
condition specified in cipslaUdpEchoTmplHistFilter is
satisfied,… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.636.1.2.1.12 |
| cipslaUdpEchoTmplHistLives The maximum number of history lives to record. A life
is defined by the countdown (or transition) to zero
by the cipslaAutoGroupScheduleLife object. A new life is
created when … | column | Unsigned32 | .1.3.6.1.4.1.9.9.636.1.2.1.13 |
| cipslaUdpEchoTmplHistBuckets The maximum number of history buckets to record.
This value should be set to the number of operations
to keep per lifetime.
After cipslaUdpEchoTmplHistBuckets are … | column | Unsigned32 | .1.3.6.1.4.1.9.9.636.1.2.1.14 |
| cipslaUdpEchoTmplHistFilter Defines a filter for adding RTT results to the history
buffer:
none(1) - no history is recorded
all(2) - the results of all completion times
… | column | Enumeration | .1.3.6.1.4.1.9.9.636.1.2.1.15 |
| cipslaUdpEchoTmplStatsHours The maximum number of hours for which statistics are
maintained. Specifically this is the number of hourly
groups to keep before rolling over.
The value of one is … | column | hours Unsigned32 | .1.3.6.1.4.1.9.9.636.1.2.1.16 |
| cipslaUdpEchoTmplDistInterval The statistical distribution buckets interval.
Distribution Bucket Example:
cipslaUdpEchoTmplDistBuckets = 5 buckets
cipslaUdpEchoTmplDistInterval = … | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.636.1.2.1.18 |
| cipslaUdpEchoTmplStorageType The storage type of this conceptual row. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.9.9.636.1.2.1.19 |
| cipslaUdpEchoTmplDescription A string which provides description to the UDP echo template. | column | OctetString | .1.3.6.1.4.1.9.9.636.1.2.1.2 |
| cipslaUdpEchoTmplRowStatus The status of the conceptual UDP echo template control row.
When the status is active, all the read-create objects in
that row can be modified. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.636.1.2.1.20 |
| cipslaUdpEchoTmplControlEnable If this object is enabled, then the IP SLA application
will send control messages to a responder, residing on the
target router to respond to the data request packets being
sent b… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.636.1.2.1.3 |
| cipslaUdpEchoTmplSrcAddrType An enumerated value which specifies the IP address type
of the source. It must be used along with the
cipslaUdpEchoTmplSrcAddr object. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.636.1.2.1.4 |
| cipslaUdpEchoTmplSrcAddr A string which specifies the IP address of the source. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.636.1.2.1.5 |
| cipslaUdpEchoTmplSrcPort This object represents the source's port number. If this
object is not specified, the application will get a
port allocated by the system. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.9.9.636.1.2.1.6 |
| cipslaUdpEchoTmplTimeOut Specifies the duration to wait for an IP SLA operation
completion.
For connection oriented protocols, this may cause the
connection to be closed by the operation. … | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.636.1.2.1.7 |
| cipslaUdpEchoTmplVerifyData When set to true, the resulting data in each IP SLA
operation is compared with the expected data. This
includes checking header information (if possible) and
exact packet size. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.636.1.2.1.8 |
| cipslaUdpEchoTmplReqDataSize This object represents the number of octets to be
placed into the ARR Data portion of the request
message, when using SNA protocols.
For non-ARR protocols' RTT requ… | column | octets Unsigned32 | .1.3.6.1.4.1.9.9.636.1.2.1.9 |