cieTestConnEntry
CISCO-IP-ENCRYPTION-MIB ·
.1.3.6.1.4.1.9.9.52.1.4.1.1
Object
row
A encryption test entry.
A management station wishing to create an entry should
first generate a pseudo-random serial number to be used
as the index to this sparse table. The station should
then create the associated instance of the row status
and row owner objects. It must also, either in the same
or in successive PDUs, create the associated instance of
the address objects.
Once the appropriate instance of all the configuration
objects have been created, either by an explicit SNMP
set request, the row status should be set
to active to initiate the request. Note that this entire
procedure may be initiated via a single set request which
specifies a row status of createAndGo.
Once the connection sequence has been activated, it cannot be
stopped -- it will run until a crypto connection has been
established between source and destination.
Once the sequence completes, the management station should
retrieve the values of the status objects of interest, and
should then delete the entry. In order to prevent old
entries from clogging the table, entries will be aged out
30 minutes after they are created.
Context
- MIB
- CISCO-IP-ENCRYPTION-MIB
- OID
.1.3.6.1.4.1.9.9.52.1.4.1.1- Type
- row
- Status
- current
- Parent
- cieTestConnTable
- Table
- cieTestConnTable
- Children
- 9
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cieTestConnSerialNumber Object which specifies a unique entry in the
cieTestConnTable. A management station wishing
to initiate a crypto session test operation should use a
pseudo-random value for this … | column | Integer32 | .1.3.6.1.4.1.9.9.52.1.4.1.1.1 |
| cieTestConnProtectedAddr The IP address of the protected (secure) node, for
the test connection. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.52.1.4.1.1.2 |
| cieTestConnUnprotectedAddr The IP address of the unprotected (insecure) node for
the test connection. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.52.1.4.1.1.3 |
| cieTestConnTrapOnCompletion Specifies whether or not a cieTestCompletion
trap should be issued on completion of test crypto session.
If such a trap is desired, it is the responsibility of the
management e… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.52.1.4.1.1.4 |
| cieTestConnCryptoMapName Specifies name of the crypto map already configured on the
router. A crypto map along with its tag number fully
specifies the enryption policy, such as type of algorithm to
be u… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.52.1.4.1.1.5 |
| cieTestConnCryptoMapTagNumber Specifies tag number of the crypto map already configured on
the router. A crypto map along with its tag number fully
specifies the enryption policy, such as type of algorithm t… | column | Integer32 | .1.3.6.1.4.1.9.9.52.1.4.1.1.6 |
| cieTestConnSessionStatus Set to a value that indicates whether a crypto session was
successfully established, failed or the connection
establishment process is in progress. If the specified crypto
map… | column | Enumeration | .1.3.6.1.4.1.9.9.52.1.4.1.1.7 |
| cieTestConnEntryOwner The entity that configured this entry. | column | IF-MIBOwnerString | .1.3.6.1.4.1.9.9.52.1.4.1.1.8 |
| cieTestConnEntryStatus The status of this table entry. Once the entry status is
set to active, the associate entry cannot be modified until
the sequence completes (cieTestConnSessionStatus has
value o… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.52.1.4.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| cieTestConnSerialNumber Object which specifies a unique entry in the
cieTestConnTable. A management station wishing
to initiate a crypto session test operation should use a
pseudo-random value for this … | column | Integer32 | .1.3.6.1.4.1.9.9.52.1.4.1.1.1 |