cimaGrpRxImaIdExpected
CISCO-IMA-MIB ·
.1.3.6.1.4.1.9.9.235.1.3.1.17
Object
column
r/w
Integer32
This object specifies the expected FE IMA ID or learned
IMA ID. It is an extension to IMA-MIB's read-only object
imaGroupRxImaId.
The valid IMA ID range is from 0 to 255.
The value '-1' of this object indicates an undetermined FE
IMA ID. The following are the possible conditions for
undetermined FE IMA ID in this object:
[1] auto-restart feature is disabled.
[2] in 'relearn' auto-restart mode, IMA group restarts and
the relearning process is in progress.
[3] in 'reuse' auto-restart mode, value of object
cimaGrpRxImaIdExpected is set to '-1' and the
relearning process is in progress.
Context
- MIB
- CISCO-IMA-MIB
- OID
.1.3.6.1.4.1.9.9.235.1.3.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cimaGroupEntry
- Table
- cimaGroupTable
- Siblings
- 17
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cimaGroupAccumulatedDelay This object indicates the amount of data per link that is
accumulated in the DCBs of the IMA group. This is a result
of deleting the slowest link of the IMA group. | column | millisecond IMA-MIBMilliSeconds | .1.3.6.1.4.1.9.9.235.1.3.1.1 |
| cimaGrpNumRxMissingIcpCells Number of Missing ICP Cells at the expected
ICP cell position on this IMA group. | column | cells SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.235.1.3.1.10 |
| cimaGrpNumTxMissingIcpCells Number of ICP cells that could not be
transmitted on this IMA group due to
lack of resources, e.g. buffers. | column | cells SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.235.1.3.1.11 |
| cimaGrpRestarting The object controls if the IMA group restart is to
be executed. During this operation the Group bringup
procedure is restarted and the group will have to go
through all the state … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.235.1.3.1.12 |
| cimaGrpNeVersion This object specifies IMA group version at the near end.
others(1) no available
version10(2) IMA 1.0
version11(3) IMA 1.1 | column | Enumeration | .1.3.6.1.4.1.9.9.235.1.3.1.13 |
| cimaGrpMaxCellRate This object indicates the IMA group's high water mark
cell rate. The value is the same as the IDCR with all
configured links in the 'active' state.
It is derived according to the … | column | cells per second SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.235.1.3.1.14 |
| cimaGrpVerFallbackEnable This object controls the IMA version fallback support.
Setting this object to true(1) will enable the fallback
support. Setting this to false(2) will disable the
fallback support. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.235.1.3.1.15 |
| cimaGrpAutoRestartMode This object specifies IMA unit sync up with FE behaviour.
disable(1) auto-restart feature is disabled.
relearn(2) In this mode, when IMA unit is re… | column | Enumeration | .1.3.6.1.4.1.9.9.235.1.3.1.16 |
| cimaGrpAutoRestartSyncState This object indicates the IMA group auto restart
synchronization state. When the group auto-restart feature
is enabled, the IMA unit runs in an enhanced IMA GSM mode.
… | column | Enumeration | .1.3.6.1.4.1.9.9.235.1.3.1.18 |
| cimaGroupClearAccDelay This object indicates whether or not to clear accumulated
delays of the IMA group. When the delay is cleared, the
group DCBs are cleared such that the current slowest link
in the… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.235.1.3.1.2 |
| cimaStuffAndCellIndication This object specifies LSI bits 0-2.
A combination of lsibit2, lsibit1, and lsibit0 indicates
stuff event:
-- 000 This is one out of the 2 ICP… | column | Bits | .1.3.6.1.4.1.9.9.235.1.3.1.3 |
| cimaGrpIntegrationUpTime Integration time for the group UP status.
The Group is declared to be UP if the status
is UP persistently for the amount to time
specified. The group changes to UP status immediat… | column | millisecond Integer32 | .1.3.6.1.4.1.9.9.235.1.3.1.4 |
| cimaGrpIntegrationDownTime Integration time for the group DOWN status.
The Group is declared to be DOWN if the status
is DOWN persistently for the amount to time
specified. The group changes to UP status im… | column | millisecond Integer32 | .1.3.6.1.4.1.9.9.235.1.3.1.5 |
| cimaGrpNumTxIcpCells Number of error-free transmitted ICP cells
in the IMA group. | column | cells SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.235.1.3.1.6 |
| cimaGrpNumRxIcpCells Number of error-free received ICP cells
in the IMA group. | column | cells SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.235.1.3.1.7 |
| cimaGrpNumRxErrIcpCells Number of Errored ICP Cells received on
this IMA group.
Errored ICP Cell is defined as:
a cell with HEC or CRC error at an
expected ICP cell position if it … | column | cells SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.235.1.3.1.8 |
| cimaGrpNumRxInvalidIcpCells Number of Invalid ICP Cells received on
this IMA group.
Invalid ICP Cell is defined as:
Cell with good HEC & CRC and CID
= ICP at expected frame position with… | column | cells SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.235.1.3.1.9 |