cimaGrpIntegrationDownTime

CISCO-IMA-MIB · .1.3.6.1.4.1.9.9.235.1.3.1.5

MIB view Table view

Object

column r/w millisecond Integer32

Integration time for the group DOWN status.
The Group is declared to be DOWN if the status
is DOWN persistently for the amount to time
specified. The group changes to UP status immediately
if 0 is specified.

Context

MIB: CISCO-IMA-MIB
OID: .1.3.6.1.4.1.9.9.235.1.3.1.5
Type: column
Access: readwrite
Status: current
Units: millisecond
Parent: cimaGroupEntry
Table: cimaGroupTable
Siblings: 17

Syntax

millisecond Integer32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cimaGroupAccumulatedDelay This object indicates the amount of data per link that is accumulated in the DCBs of the IMA group. This is a result of deleting the slowest link of the IMA group.	column	millisecond IMA-MIBMilliSeconds	`.1.3.6.1.4.1.9.9.235.1.3.1.1`
cimaGrpNumRxMissingIcpCells Number of Missing ICP Cells at the expected ICP cell position on this IMA group.	column	cells SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.235.1.3.1.10`
cimaGrpNumTxMissingIcpCells Number of ICP cells that could not be transmitted on this IMA group due to lack of resources, e.g. buffers.	column	cells SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.235.1.3.1.11`
cimaGrpRestarting The object controls if the IMA group restart is to be executed. During this operation the Group bringup procedure is restarted and the group will have to go through all the state …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.235.1.3.1.12`
cimaGrpNeVersion This object specifies IMA group version at the near end. others(1) no available version10(2) IMA 1.0 version11(3) IMA 1.1	column	Enumeration	`.1.3.6.1.4.1.9.9.235.1.3.1.13`
cimaGrpMaxCellRate This object indicates the IMA group's high water mark cell rate. The value is the same as the IDCR with all configured links in the 'active' state. It is derived according to the …	column	cells per second SNMPv2-SMIGauge32	`.1.3.6.1.4.1.9.9.235.1.3.1.14`
cimaGrpVerFallbackEnable This object controls the IMA version fallback support. Setting this object to true(1) will enable the fallback support. Setting this to false(2) will disable the fallback support.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.235.1.3.1.15`
cimaGrpAutoRestartMode This object specifies IMA unit sync up with FE behaviour. disable(1) auto-restart feature is disabled. relearn(2) In this mode, when IMA unit is re…	column	Enumeration	`.1.3.6.1.4.1.9.9.235.1.3.1.16`
cimaGrpRxImaIdExpected This object specifies the expected FE IMA ID or learned IMA ID. It is an extension to IMA-MIB's read-only object imaGroupRxImaId. The valid IMA ID range is from 0 t…	column	Integer32	`.1.3.6.1.4.1.9.9.235.1.3.1.17`
cimaGrpAutoRestartSyncState This object indicates the IMA group auto restart synchronization state. When the group auto-restart feature is enabled, the IMA unit runs in an enhanced IMA GSM mode. …	column	Enumeration	`.1.3.6.1.4.1.9.9.235.1.3.1.18`
cimaGroupClearAccDelay This object indicates whether or not to clear accumulated delays of the IMA group. When the delay is cleared, the group DCBs are cleared such that the current slowest link in the…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.235.1.3.1.2`
cimaStuffAndCellIndication This object specifies LSI bits 0-2. A combination of lsibit2, lsibit1, and lsibit0 indicates stuff event: -- 000 This is one out of the 2 ICP…	column	Bits	`.1.3.6.1.4.1.9.9.235.1.3.1.3`
cimaGrpIntegrationUpTime Integration time for the group UP status. The Group is declared to be UP if the status is UP persistently for the amount to time specified. The group changes to UP status immediat…	column	millisecond Integer32	`.1.3.6.1.4.1.9.9.235.1.3.1.4`
cimaGrpNumTxIcpCells Number of error-free transmitted ICP cells in the IMA group.	column	cells SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.235.1.3.1.6`
cimaGrpNumRxIcpCells Number of error-free received ICP cells in the IMA group.	column	cells SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.235.1.3.1.7`
cimaGrpNumRxErrIcpCells Number of Errored ICP Cells received on this IMA group. Errored ICP Cell is defined as: a cell with HEC or CRC error at an expected ICP cell position if it …	column	cells SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.235.1.3.1.8`
cimaGrpNumRxInvalidIcpCells Number of Invalid ICP Cells received on this IMA group. Invalid ICP Cell is defined as: Cell with good HEC & CRC and CID = ICP at expected frame position with…	column	cells SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.235.1.3.1.9`