cimaGrpAutoRestartMode

CISCO-IMA-MIB · .1.3.6.1.4.1.9.9.235.1.3.1.16

Object

column r/w Enumeration

This object specifies IMA unit sync up with FE behaviour.
              
disable(1)  auto-restart feature is disabled.
              
relearn(2)  In this mode, when IMA unit is restarted,
            the IMA unit ignores the expected IMA ID
            defined by cimaGrpRxImaIdExpected, and
            relearns the FE IMA ID. Relearning is a
            process that NE will try to sync up with
            any FE IMA IDs, when both NE and FE group
            transit to 'Operational' state for the first
            time, the agent will save this FE IMA ID to
            its persistent configuration. This learned
            FE IMA ID will be represented by
            cimaGrpRxImaIdExpected object. During
            relearning process, the agent returns value
            of '-1' for cimaGrpRxImaIdExpected object.
              
reuse(3)    In this mode, when IMA unit is restarted,
            the IMA unit will sync up with the expected
            FE group whose Id is specified by
            cimaGrpRxImaIdExpected. If the
            cimaGrpRxImaIdExpected object value is '-1',
            which indicates an undetermined FE IMA ID,
            the agent will relearn the FE IMA ID.
            The NE will use this FE IMA ID to sync up
            with FE in any subsequent card reset or IMA
            group restart.

Context

MIB: CISCO-IMA-MIB
OID: .1.3.6.1.4.1.9.9.235.1.3.1.16
Type: column
Access: readwrite
Status: current
Parent: cimaGroupEntry
Table: cimaGroupTable
Siblings: 17

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cimaGroupAccumulatedDelay This object indicates the amount of data per link that is accumulated in the DCBs of the IMA group. This is a result of deleting the slowest link of the IMA group.	column	millisecond IMA-MIBMilliSeconds	`.1.3.6.1.4.1.9.9.235.1.3.1.1`
cimaGrpNumRxMissingIcpCells Number of Missing ICP Cells at the expected ICP cell position on this IMA group.	column	cells SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.235.1.3.1.10`
cimaGrpNumTxMissingIcpCells Number of ICP cells that could not be transmitted on this IMA group due to lack of resources, e.g. buffers.	column	cells SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.235.1.3.1.11`
cimaGrpRestarting The object controls if the IMA group restart is to be executed. During this operation the Group bringup procedure is restarted and the group will have to go through all the state …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.235.1.3.1.12`
cimaGrpNeVersion This object specifies IMA group version at the near end. others(1) no available version10(2) IMA 1.0 version11(3) IMA 1.1	column	Enumeration	`.1.3.6.1.4.1.9.9.235.1.3.1.13`
cimaGrpMaxCellRate This object indicates the IMA group's high water mark cell rate. The value is the same as the IDCR with all configured links in the 'active' state. It is derived according to the …	column	cells per second SNMPv2-SMIGauge32	`.1.3.6.1.4.1.9.9.235.1.3.1.14`
cimaGrpVerFallbackEnable This object controls the IMA version fallback support. Setting this object to true(1) will enable the fallback support. Setting this to false(2) will disable the fallback support.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.235.1.3.1.15`
cimaGrpRxImaIdExpected This object specifies the expected FE IMA ID or learned IMA ID. It is an extension to IMA-MIB's read-only object imaGroupRxImaId. The valid IMA ID range is from 0 t…	column	Integer32	`.1.3.6.1.4.1.9.9.235.1.3.1.17`
cimaGrpAutoRestartSyncState This object indicates the IMA group auto restart synchronization state. When the group auto-restart feature is enabled, the IMA unit runs in an enhanced IMA GSM mode. …	column	Enumeration	`.1.3.6.1.4.1.9.9.235.1.3.1.18`
cimaGroupClearAccDelay This object indicates whether or not to clear accumulated delays of the IMA group. When the delay is cleared, the group DCBs are cleared such that the current slowest link in the…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.235.1.3.1.2`
cimaStuffAndCellIndication This object specifies LSI bits 0-2. A combination of lsibit2, lsibit1, and lsibit0 indicates stuff event: -- 000 This is one out of the 2 ICP…	column	Bits	`.1.3.6.1.4.1.9.9.235.1.3.1.3`
cimaGrpIntegrationUpTime Integration time for the group UP status. The Group is declared to be UP if the status is UP persistently for the amount to time specified. The group changes to UP status immediat…	column	millisecond Integer32	`.1.3.6.1.4.1.9.9.235.1.3.1.4`
cimaGrpIntegrationDownTime Integration time for the group DOWN status. The Group is declared to be DOWN if the status is DOWN persistently for the amount to time specified. The group changes to UP status im…	column	millisecond Integer32	`.1.3.6.1.4.1.9.9.235.1.3.1.5`
cimaGrpNumTxIcpCells Number of error-free transmitted ICP cells in the IMA group.	column	cells SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.235.1.3.1.6`
cimaGrpNumRxIcpCells Number of error-free received ICP cells in the IMA group.	column	cells SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.235.1.3.1.7`
cimaGrpNumRxErrIcpCells Number of Errored ICP Cells received on this IMA group. Errored ICP Cell is defined as: a cell with HEC or CRC error at an expected ICP cell position if it …	column	cells SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.235.1.3.1.8`
cimaGrpNumRxInvalidIcpCells Number of Invalid ICP Cells received on this IMA group. Invalid ICP Cell is defined as: Cell with good HEC & CRC and CID = ICP at expected frame position with…	column	cells SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.235.1.3.1.9`