c07vrrpOperationsRowStatus
CISCO-IETF-VRRP-07-MIB ·
.1.3.6.1.4.1.9.10.143.1.7.1.14
Object
The RowStatus variable should be used in accordance to
installation and removal conventions for conceptual
rows. When `vrrpOperationsRowStatus' is set to
active(1), no other objects in the conceptual row can
be modified.
To create a row in this table, a manager sets this
object to either createAndGo(4) or createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
Corresponding instance of the `vrrpOperationsRowStatus'
column will be read as notReady(3).
In particular, a newly created row cannot be made
active(1) until (minimally) the corresponding instance
of vrrpOperationsInetAddrType, vrrpOperationsVrId and
vrrpOperationsPrimaryIpAddr has been set and there is
at least one active row in the
`vrrpAssociatedIpAddrTable' defining an associated
IP address.
notInService(2) should be used to administratively
bring the row down.
A typical order of operation to add a row is:
1. Create a row in vrrpOperationsTable with
createAndWait(5).
2. Create one or more corresponding rows in
vrrpAssociatedIpAddrTable.
3. Populate the vrrpOperationsEntry.
4. set vrrpOperationsRowStatus to active(1).
A typical order of operation to delete an entry is:
1. Set vrrpOperationsRowStatus to notInService(2).
2. Set the corresponding rows in
vrrpAssociatedIpAddrTable to destroy(6) to delete the
entry.
3. set vrrpOperationsRowStatus to destroy(6) to delete
the entry.
Context
- MIB
- CISCO-IETF-VRRP-07-MIB
- OID
.1.3.6.1.4.1.9.10.143.1.7.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- c07vrrpOperationsEntry
- Table
- c07vrrpOperationsTable
- Siblings
- 13
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| c07vrrpOperationsInetAddrType The IP address type of C07VrrpOperationsEntry. This value
applies to both vrrpOperationsMasterIpAddr and
vrrpOperationsPrimaryIpAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.10.143.1.7.1.1 |
| c07vrrpOperationsPreemptMode Controls whether a higher priority virtual router will
preempt a lower priority master. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.143.1.7.1.10 |
| c07vrrpOperationsAcceptMode Controls whether a virtual router in Master state
will accept packets addressed to the address owner's
IPv6 address as its own if it is not the IPv6 address
owner. Default is Fal… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.143.1.7.1.11 |
| c07vrrpOperationsUpTime This is the value of the `sysUpTime' object when this
virtual router (i.e., the `vrrpOperationsState')
transitioned out of `initialized'. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.10.143.1.7.1.12 |
| c07vrrpOperationsStorageType The storage type for this conceptual row. Write access
is not required. It is optional to support nonVolatile
StorageType enumeration. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.9.10.143.1.7.1.13 |
| c07vrrpOperationsVrId This object contains the Virtual Router Identifier
(VRID). | column | C07VrId | .1.3.6.1.4.1.9.10.143.1.7.1.2 |
| c07vrrpOperationsVirtualMacAddr The virtual MAC address of the virtual router.
Although this object can be derived from the
'vrrpOperationsVrId' object, it is defined so that it
is easily obtainable by a managem… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.10.143.1.7.1.3 |
| c07vrrpOperationsState The current state of the virtual router. This object
has three defined values:
- `initialize', which indicates that the
virtual router is waiting for a startu… | column | Enumeration | .1.3.6.1.4.1.9.10.143.1.7.1.4 |
| c07vrrpOperationsPriority This object specifies the priority to be used for the
virtual router master election process. Higher values
imply higher priority.
A priority of '0', although not … | column | Unsigned32 | .1.3.6.1.4.1.9.10.143.1.7.1.5 |
| c07vrrpOperationsAddrCount The number of IP addresses that are associated with
this virtual router. This number is equal to the
number of rows in the vrrpAssociatedAddrTable that
correspond to a given IP v… | column | Integer32 | .1.3.6.1.4.1.9.10.143.1.7.1.6 |
| c07vrrpOperationsMasterIpAddr The master router's real IP address. Master router
would set this address to vrrpOperationsPrimaryIpAddr
while transitioning to master state. For backup
routers, this is the IP ad… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.10.143.1.7.1.7 |
| c07vrrpOperationsPrimaryIpAddr In the case where there are more than one IP
Address (associated IP addresses) for a given
`ifIndex', this object is used to specify the IP
address that will become the
vrrpOperat… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.10.143.1.7.1.8 |
| c07vrrpOperationsAdvInterval The time interval, in centiseconds, between sending
advertisement messages. Only the master router sends
VRRP advertisements. | column | centiseconds Integer32 | .1.3.6.1.4.1.9.10.143.1.7.1.9 |