c07vrrpOperationsPriority

Object

column r/w Unsigned32

This object specifies the priority to be used for the
virtual router master election process.  Higher values
imply higher priority.
              
A priority of '0', although not settable, is sent by
the master router to indicate that this router has
ceased to participate in VRRP and a backup virtual
router should transition to become a new master.
              
A priority of 255 is used for the router that owns the
associated IP address(es) for VRRP over IPv4 and hence
not settable.
              
A 'badValue(3)' should be returned when a user tries to
set 0 or 255 for this object.

Context

MIB: CISCO-IETF-VRRP-07-MIB
OID: .1.3.6.1.4.1.9.10.143.1.7.1.5
Type: column
Access: readwrite
Status: current
Parent: c07vrrpOperationsEntry
Table: c07vrrpOperationsTable
Siblings: 13

Related Objects

Sibling Objects

Object	Type	Syntax	OID
c07vrrpOperationsInetAddrType The IP address type of C07VrrpOperationsEntry. This value applies to both vrrpOperationsMasterIpAddr and vrrpOperationsPrimaryIpAddr.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.9.10.143.1.7.1.1`
c07vrrpOperationsPreemptMode Controls whether a higher priority virtual router will preempt a lower priority master.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.10.143.1.7.1.10`
c07vrrpOperationsAcceptMode Controls whether a virtual router in Master state will accept packets addressed to the address owner's IPv6 address as its own if it is not the IPv6 address owner. Default is Fal…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.10.143.1.7.1.11`
c07vrrpOperationsUpTime This is the value of the `sysUpTime' object when this virtual router (i.e., the `vrrpOperationsState') transitioned out of `initialized'.	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.9.10.143.1.7.1.12`
c07vrrpOperationsStorageType The storage type for this conceptual row. Write access is not required. It is optional to support nonVolatile StorageType enumeration.	column	SNMPv2-TCStorageType	`.1.3.6.1.4.1.9.10.143.1.7.1.13`
c07vrrpOperationsRowStatus The RowStatus variable should be used in accordance to installation and removal conventions for conceptual rows. When `vrrpOperationsRowStatus' is set to active(1), no other objec…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.10.143.1.7.1.14`
c07vrrpOperationsVrId This object contains the Virtual Router Identifier (VRID).	column	C07VrId	`.1.3.6.1.4.1.9.10.143.1.7.1.2`
c07vrrpOperationsVirtualMacAddr The virtual MAC address of the virtual router. Although this object can be derived from the 'vrrpOperationsVrId' object, it is defined so that it is easily obtainable by a managem…	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.9.10.143.1.7.1.3`
c07vrrpOperationsState The current state of the virtual router. This object has three defined values: - `initialize', which indicates that the virtual router is waiting for a startu…	column	Enumeration	`.1.3.6.1.4.1.9.10.143.1.7.1.4`
c07vrrpOperationsAddrCount The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssociatedAddrTable that correspond to a given IP v…	column	Integer32	`.1.3.6.1.4.1.9.10.143.1.7.1.6`
c07vrrpOperationsMasterIpAddr The master router's real IP address. Master router would set this address to vrrpOperationsPrimaryIpAddr while transitioning to master state. For backup routers, this is the IP ad…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.10.143.1.7.1.7`
c07vrrpOperationsPrimaryIpAddr In the case where there are more than one IP Address (associated IP addresses) for a given `ifIndex', this object is used to specify the IP address that will become the vrrpOperat…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.10.143.1.7.1.8`
c07vrrpOperationsAdvInterval The time interval, in centiseconds, between sending advertisement messages. Only the master router sends VRRP advertisements.	column	centiseconds Integer32	`.1.3.6.1.4.1.9.10.143.1.7.1.9`

Object

Context

Syntax

Values & Constraints

Related Objects