cnatConfStaticProtocol
CISCO-IETF-NAT-MIB ·
.1.3.6.1.4.1.9.10.77.1.1.2.1.11
Object
column
r/w
Bits
This object specifies a protocol identifier. If the value of this object is '0', then this basic NAT entry applies to all IP traffic. If the value of this object is non-zero, then this NAT entry only applies to IP traffic with the specified protocol.
Context
- MIB
- CISCO-IETF-NAT-MIB
- OID
.1.3.6.1.4.1.9.10.77.1.1.2.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cnatConfStaticAddrMapEntry
- Table
- cnatConfStaticAddrMapTable
- Siblings
- 12
Syntax
Bits
Values & Constraints
Enumerated Values
0 | all |
1 | other |
2 | icmp |
3 | udp |
4 | tcp |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cnatConfStaticAddrMapName An arbitrary, but unique identifier associated with this
cnatConfStaticAddrMapEntry. The value of this object is
unique across both the static address map and the dynamic
address … | column | OctetString | .1.3.6.1.4.1.9.10.77.1.1.2.1.1 |
| cnatConfStaticGlobalPortTo If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual describes
NAPT, then the value of this object specifies the last
port number… | column | Integer32 | .1.3.6.1.4.1.9.10.77.1.1.2.1.10 |
| cnatConfStaticAddrMapStorageType The storage type for this conceptual row. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.9.10.77.1.1.2.1.12 |
| cnatConfStaticAddrMapStatus The status of this conceptual row.
To create a row in this table, a manager must set this
object to either createAndGo(4) or createAndWait(5). | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.10.77.1.1.2.1.13 |
| cnatConfStaticAddrMapType Address (and Transport-ID) maps may be defined for both
inbound and outbound direction. Outbound address map
refers to mapping a selected set of addresses from
private realm to a … | column | Enumeration | .1.3.6.1.4.1.9.10.77.1.1.2.1.2 |
| cnatConfStaticLocalAddrFrom This object specifies the first IP address of the range
of IP addresses mapped by this translation entry. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.10.77.1.1.2.1.3 |
| cnatConfStaticLocalAddrTo This object specifies the last IP address of the range of
IP addresses mapped by this translation entry. If only
a single address being mapped, the value of this object
is equal t… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.10.77.1.1.2.1.4 |
| cnatConfStaticLocalPortFrom If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the first port n… | column | Integer32 | .1.3.6.1.4.1.9.10.77.1.1.2.1.5 |
| cnatConfStaticLocalPortTo If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the last port nu… | column | Integer32 | .1.3.6.1.4.1.9.10.77.1.1.2.1.6 |
| cnatConfStaticGlobalAddrFrom This object specifies the first IP address of the range of
IP addresses being mapped to. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.10.77.1.1.2.1.7 |
| cnatConfStaticGlobalAddrTo This object specifies the last IP address of the range of
IP addresses being mapped to. If only a single address is
being mapped to, the value of this object is equal to the
value… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.10.77.1.1.2.1.8 |
| cnatConfStaticGlobalPortFrom If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the first port … | column | Integer32 | .1.3.6.1.4.1.9.10.77.1.1.2.1.9 |