cnatConfStaticLocalAddrTo
CISCO-IETF-NAT-MIB ·
.1.3.6.1.4.1.9.10.77.1.1.2.1.4
Object
This object specifies the last IP address of the range of IP addresses mapped by this translation entry. If only a single address being mapped, the value of this object is equal to the value of cnatConfStaticLocalAddrFrom. The number addresses in the range defined by cnatConfStaticLocalAddrFrom and cnatConfStaticLocalAddrTo should be equal to the number of addresses in the range defined by cnatConfStaticGlobalAddrFrom and cnatConfStaticGlobalAddrTo.
Context
- MIB
- CISCO-IETF-NAT-MIB
- OID
.1.3.6.1.4.1.9.10.77.1.1.2.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cnatConfStaticAddrMapEntry
- Table
- cnatConfStaticAddrMapTable
- Siblings
- 12
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cnatConfStaticAddrMapName An arbitrary, but unique identifier associated with this
cnatConfStaticAddrMapEntry. The value of this object is
unique across both the static address map and the dynamic
address … | column | OctetString | .1.3.6.1.4.1.9.10.77.1.1.2.1.1 |
| cnatConfStaticGlobalPortTo If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual describes
NAPT, then the value of this object specifies the last
port number… | column | Integer32 | .1.3.6.1.4.1.9.10.77.1.1.2.1.10 |
| cnatConfStaticProtocol This object specifies a protocol identifier. If the
value of this object is '0', then this basic NAT entry
applies to all IP traffic. If the value of this object
is non-zero, then… | column | Bits | .1.3.6.1.4.1.9.10.77.1.1.2.1.11 |
| cnatConfStaticAddrMapStorageType The storage type for this conceptual row. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.9.10.77.1.1.2.1.12 |
| cnatConfStaticAddrMapStatus The status of this conceptual row.
To create a row in this table, a manager must set this
object to either createAndGo(4) or createAndWait(5). | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.10.77.1.1.2.1.13 |
| cnatConfStaticAddrMapType Address (and Transport-ID) maps may be defined for both
inbound and outbound direction. Outbound address map
refers to mapping a selected set of addresses from
private realm to a … | column | Enumeration | .1.3.6.1.4.1.9.10.77.1.1.2.1.2 |
| cnatConfStaticLocalAddrFrom This object specifies the first IP address of the range
of IP addresses mapped by this translation entry. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.10.77.1.1.2.1.3 |
| cnatConfStaticLocalPortFrom If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the first port n… | column | Integer32 | .1.3.6.1.4.1.9.10.77.1.1.2.1.5 |
| cnatConfStaticLocalPortTo If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the last port nu… | column | Integer32 | .1.3.6.1.4.1.9.10.77.1.1.2.1.6 |
| cnatConfStaticGlobalAddrFrom This object specifies the first IP address of the range of
IP addresses being mapped to. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.10.77.1.1.2.1.7 |
| cnatConfStaticGlobalAddrTo This object specifies the last IP address of the range of
IP addresses being mapped to. If only a single address is
being mapped to, the value of this object is equal to the
value… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.10.77.1.1.2.1.8 |
| cnatConfStaticGlobalPortFrom If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the first port … | column | Integer32 | .1.3.6.1.4.1.9.10.77.1.1.2.1.9 |