cnatConfDynLocalAddrFrom
CISCO-IETF-NAT-MIB ·
.1.3.6.1.4.1.9.10.77.1.1.3.1.3
Object
This object specifies the first IP address of the range of IP addresses mapped by this translation entry.
Context
- MIB
- CISCO-IETF-NAT-MIB
- OID
.1.3.6.1.4.1.9.10.77.1.1.3.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cnatConfDynAddrMapEntry
- Table
- cnatConfDynAddrMapTable
- Siblings
- 12
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cnatConfDynAddrMapName An arbitrary, but unique identifier associated with this
cnatConfDynAddrMapEntry. The value of this object is
unique across both the static address map and the dynamic
address map… | column | OctetString | .1.3.6.1.4.1.9.10.77.1.1.3.1.1 |
| cnatConfDynGlobalPortTo If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the last port nu… | column | Integer32 | .1.3.6.1.4.1.9.10.77.1.1.3.1.10 |
| cnatConfDynProtocol This object specifies a protocol identifier. If the
value of this object is '0', then this basic NAT entry
applies to all IP traffic. If the value of this object is
non-zero, then… | column | Bits | .1.3.6.1.4.1.9.10.77.1.1.3.1.11 |
| cnatConfDynAddrMapStorageType The storage type for this conceptual row. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.9.10.77.1.1.3.1.12 |
| cnatConfDynAddrMapStatus The status of this conceptual row.
To create a row in this table, a manager must set this
object to either createAndGo(4) or createAndWait(5). | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.10.77.1.1.3.1.13 |
| cnatConfDynAddressMapType Address (and Transport-ID) maps may be defined for both
inbound and outbound direction. Outbound address map
refers to mapping a selected set of addresses from
private realm to a … | column | Enumeration | .1.3.6.1.4.1.9.10.77.1.1.3.1.2 |
| cnatConfDynLocalAddrTo This object specifies the last IP address of the range of
IP addresses mapped by this translation entry. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.10.77.1.1.3.1.4 |
| cnatConfDynLocalPortFrom If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the first port n… | column | Integer32 | .1.3.6.1.4.1.9.10.77.1.1.3.1.5 |
| cnatConfDynLocalPortTo If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the last port nu… | column | Integer32 | .1.3.6.1.4.1.9.10.77.1.1.3.1.6 |
| cnatConfDynGlobalAddrFrom This object specifies the first IP address of the range
of IP addresses being mapped to. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.10.77.1.1.3.1.7 |
| cnatConfDynGlobalAddrTo This object specifies the last IP address of the range of
IP addresses being mapped to. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.10.77.1.1.3.1.8 |
| cnatConfDynGlobalPortFrom If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the first port … | column | Integer32 | .1.3.6.1.4.1.9.10.77.1.1.3.1.9 |