cnatConfDynGlobalPortFrom
CISCO-IETF-NAT-MIB ·
.1.3.6.1.4.1.9.10.77.1.1.3.1.9
Object
column
r/w
Integer32
If this conceptual row describes a basic NAT, then the value of this object is '0'. If this conceptual row describes NAPT, then the value of this object specifies the first port number in the range of ports being mapped to. If the translation specifies a single port, then the value of this object is equal to the value of cnatConfDynGlobalPortTo.
Context
- MIB
- CISCO-IETF-NAT-MIB
- OID
.1.3.6.1.4.1.9.10.77.1.1.3.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cnatConfDynAddrMapEntry
- Table
- cnatConfDynAddrMapTable
- Siblings
- 12
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cnatConfDynAddrMapName An arbitrary, but unique identifier associated with this
cnatConfDynAddrMapEntry. The value of this object is
unique across both the static address map and the dynamic
address map… | column | OctetString | .1.3.6.1.4.1.9.10.77.1.1.3.1.1 |
| cnatConfDynGlobalPortTo If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the last port nu… | column | Integer32 | .1.3.6.1.4.1.9.10.77.1.1.3.1.10 |
| cnatConfDynProtocol This object specifies a protocol identifier. If the
value of this object is '0', then this basic NAT entry
applies to all IP traffic. If the value of this object is
non-zero, then… | column | Bits | .1.3.6.1.4.1.9.10.77.1.1.3.1.11 |
| cnatConfDynAddrMapStorageType The storage type for this conceptual row. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.9.10.77.1.1.3.1.12 |
| cnatConfDynAddrMapStatus The status of this conceptual row.
To create a row in this table, a manager must set this
object to either createAndGo(4) or createAndWait(5). | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.10.77.1.1.3.1.13 |
| cnatConfDynAddressMapType Address (and Transport-ID) maps may be defined for both
inbound and outbound direction. Outbound address map
refers to mapping a selected set of addresses from
private realm to a … | column | Enumeration | .1.3.6.1.4.1.9.10.77.1.1.3.1.2 |
| cnatConfDynLocalAddrFrom This object specifies the first IP address of the range
of IP addresses mapped by this translation entry. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.10.77.1.1.3.1.3 |
| cnatConfDynLocalAddrTo This object specifies the last IP address of the range of
IP addresses mapped by this translation entry. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.10.77.1.1.3.1.4 |
| cnatConfDynLocalPortFrom If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the first port n… | column | Integer32 | .1.3.6.1.4.1.9.10.77.1.1.3.1.5 |
| cnatConfDynLocalPortTo If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the last port nu… | column | Integer32 | .1.3.6.1.4.1.9.10.77.1.1.3.1.6 |
| cnatConfDynGlobalAddrFrom This object specifies the first IP address of the range
of IP addresses being mapped to. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.10.77.1.1.3.1.7 |
| cnatConfDynGlobalAddrTo This object specifies the last IP address of the range of
IP addresses being mapped to. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.10.77.1.1.3.1.8 |