ciiCircLevelMinLSPRetransInt
CISCO-IETF-ISIS-MIB ·
.1.3.6.1.4.1.9.10.118.1.4.1.1.12
Object
column
r/w
seconds Integer32
Minimum interval, in seconds, between re-transmission of
an LSP at this level. This object follows the
resettingTimer behavior.
Note that ciiCircLevelLSPThrottle controls
how fast we send back to back LSPs. This variable
controls how fast we re-send the same LSP.
Context
- MIB
- CISCO-IETF-ISIS-MIB
- OID
.1.3.6.1.4.1.9.10.118.1.4.1.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- ciiCircLevelEntry
- Table
- ciiCircLevelTable
- Siblings
- 13
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 1-300
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ciiCircLevelIndex The level that this entry describes. | column | Enumeration | .1.3.6.1.4.1.9.10.118.1.4.1.1.1 |
| ciiCircLevelDRHelloTimer Period, in milliseconds, between Hello PDUs on
multiaccess networks when this IS is the Designated
Intermediate System. This object follows the
resettingTimer behavior. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.10.118.1.4.1.1.10 |
| ciiCircLevelLSPThrottle Minimal interval of time, in milliseconds, between
transmissions of LSPs on an interface at this level. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.10.118.1.4.1.1.11 |
| ciiCircLevelCSNPInterval Interval of time, in seconds, between periodic
transmission of a complete set of CSNPs on
multiaccess networks if this router is the
designated router at this level.
… | column | seconds Integer32 | .1.3.6.1.4.1.9.10.118.1.4.1.1.13 |
| ciiCircLevelPartSNPInterval Minimum interval in seconds between sending Partial
Sequence Number PDUs at this level. This object
follows the resettingTimer behavior. | column | seconds Integer32 | .1.3.6.1.4.1.9.10.118.1.4.1.1.14 |
| ciiCircLevelMetric The metric value of this circuit for this level. | column | CiiDefaultMetric | .1.3.6.1.4.1.9.10.118.1.4.1.1.2 |
| ciiCircLevelWideMetric The wide metric value of this circuit for this level. | column | CiiWideMetric | .1.3.6.1.4.1.9.10.118.1.4.1.1.3 |
| ciiCircLevelISPriority The priority for becoming LAN Designated
Intermediate System at this level. | column | CiiISPriority | .1.3.6.1.4.1.9.10.118.1.4.1.1.4 |
| ciiCircLevelIDOctet A one byte identifier that can be used in protocol packets
to identify a circuit. Values of ciiCircLevelIDOctet
do not need to be unique. They are only required to
differ on LAN… | column | Integer32 | .1.3.6.1.4.1.9.10.118.1.4.1.1.5 |
| ciiCircLevelID On a point to point circuit with a fully initialized
adjacency to a peer IS, the value of this object is
the circuit ID negotiated during adjacency initialization.
On a point to p… | column | CiiCircuitID | .1.3.6.1.4.1.9.10.118.1.4.1.1.6 |
| ciiCircLevelDesIS The ID of the LAN Designated Intermediate System
on this circuit at this level. If, for any reason,
this system is not partaking in the relevant
Designated Intermediate System ele… | column | CiiCircuitID | .1.3.6.1.4.1.9.10.118.1.4.1.1.7 |
| ciiCircLevelHelloMultiplier This value is multiplied by the corresponding HelloTimer
and the result in seconds (rounded up) is used as the
holding time in transmitted hellos, to be used by
receivers of hello… | column | Integer32 | .1.3.6.1.4.1.9.10.118.1.4.1.1.8 |
| ciiCircLevelHelloTimer Maximum period, in milliseconds, between IIH PDUs
on multiaccess networks at this level for LANs.
The value at L1 is used as the period between
Hellos on L1L2 point to point circu… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.10.118.1.4.1.1.9 |