ciscoBfdSessAddr
CISCO-IETF-BFD-MIB ·
.1.3.6.1.4.1.9.10.137.1.2.1.14
Object
This object specifies the neighboring IP address which is being monitored with this BFD session. It can also be used to enabled BFD on a specific interface. The value is set to zero when BFD session is not associated with a specific interface.
Context
- MIB
- CISCO-IETF-BFD-MIB
- OID
.1.3.6.1.4.1.9.10.137.1.2.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ciscoBfdSessEntry
- Table
- ciscoBfdSessTable
- Siblings
- 24
Syntax
INET-ADDRESS-MIBInetAddress
- Source
- INET-ADDRESS-MIBInetAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ciscoBfdSessIndex This object contains an index used to represent a
unique BFD session on this device. | column | CiscoBfdSessIndexTC | .1.3.6.1.4.1.9.10.137.1.2.1.1 |
| ciscoBfdSessDemandModeDesiredFlag This object indicates that the local system's
desire to use Demand mode. Specifically, it is set
to true(1) if the local system wishes to use
Demand mode or false(0) if not | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.137.1.2.1.10 |
| ciscoBfdSessEchoFuncModeDesiredFlag This object indicates that the local system's
desire to use Echo mode. Specifically, it is set
to true(1) if the local system wishes to use
Echo mode or false(0) if not | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.137.1.2.1.11 |
| ciscoBfdSessControlPlanIndepFlag This object indicates that the local system's
ability to continue to function through a disruption of
the control plane. Specifically, it is set
to true(1) if the local system… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.137.1.2.1.12 |
| ciscoBfdSessAddrType This object specifies IP address type of the neighboring IP
address which is being monitored with this BFD session.
Only values unknown(0), ipv4(1) or ipv6(2)
have… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.10.137.1.2.1.13 |
| ciscoBfdSessDesiredMinTxInterval This object specifies the minimum interval, in
microseconds, that the local system would like to use when
transmitting BFD Control packets. | column | CiscoBfdInterval | .1.3.6.1.4.1.9.10.137.1.2.1.15 |
| ciscoBfdSessReqMinRxInterval This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. | column | CiscoBfdInterval | .1.3.6.1.4.1.9.10.137.1.2.1.16 |
| ciscoBfdSessReqMinEchoRxInterval This object specifies the minimum interval, in
microseconds, between received BFD Echo packets that this
system is capable of supporting. | column | CiscoBfdInterval | .1.3.6.1.4.1.9.10.137.1.2.1.17 |
| ciscoBfdSessDetectMult This object specifies the Detect time multiplier. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.137.1.2.1.18 |
| ciscoBfdSessStorType This variable indicates the storage type for this
object. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar objects in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.9.10.137.1.2.1.19 |
| ciscoBfdSessApplicationId This object contains an index used to indicate
a local application which owns or maintains this
BFD session. For instance, the MPLS VPN process may
maintain a subset of the tota… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.137.1.2.1.2 |
| ciscoBfdSessRowStatus This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state, no
objects in this row can be modified ex… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.10.137.1.2.1.20 |
| ciscoBfdSessAuthPresFlag This object indicates that the local system's
desire to use Authentication. Specifically, it is set
to true(1) if the local system wishes the session
to be authenticated or fa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.137.1.2.1.21 |
| ciscoBfdSessAuthenticationType The Authentication Type used for this BFD session. This
field is valid only when the Authentication Present bit is set | column | Enumeration | .1.3.6.1.4.1.9.10.137.1.2.1.22 |
| ciscoBfdSessVersionNumber The version number of the BFD protocol that this session is
running in. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.137.1.2.1.23 |
| ciscoBfdSessType The type of this BFD session. | column | Enumeration | .1.3.6.1.4.1.9.10.137.1.2.1.24 |
| ciscoBfdSessInterface This object contains an interface index used to indicate
the interface which this BFD session is running on. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.10.137.1.2.1.25 |
| ciscoBfdSessDiscriminator This object specifies the local discriminator for this BFD
session, used to uniquely identify it. | column | Unsigned32 | .1.3.6.1.4.1.9.10.137.1.2.1.3 |
| ciscoBfdSessRemoteDiscr This object specifies the session discriminator chosen
by the remote system for this BFD session. | column | Unsigned32 | .1.3.6.1.4.1.9.10.137.1.2.1.4 |
| ciscoBfdSessUdpPort The destination UDP Port for BFD. The default value is
the well-known value for this port. BFD State failing(5)
is only applicable if this BFD session is running
version 0 | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.9.10.137.1.2.1.5 |
| ciscoBfdSessState The perceived state of the BFD session. | column | Enumeration | .1.3.6.1.4.1.9.10.137.1.2.1.6 |
| ciscoBfdSessRemoteHeardFlag This object specifies status of BFD packet reception from
the remote system. Specifically, it is set to true(1) if
the local system is actively receiving BFD packets from the
r… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.137.1.2.1.7 |
| ciscoBfdSessDiag A diagnostic code specifying the local system's reason
for the last transition of the session from up(1)
to some other state. | column | CiscoBfdDiag | .1.3.6.1.4.1.9.10.137.1.2.1.8 |
| ciscoBfdSessOperMode This object specifies current operating mode that BFD
session is operating in. | column | Enumeration | .1.3.6.1.4.1.9.10.137.1.2.1.9 |