chivIpVerifyCheckTypeName

CISCO-HARDWARE-IP-VERIFY-MIB · .1.3.6.1.4.1.9.9.804.1.1.1.2

Object

column Enumeration
This object indicates the IDS packet check type
which can be configured on the device. Each check type
is a specific criteria. Those IP packets 
that matches the certain criteria are dropped. 
              
    addressSrcBroadcast(1)
        Drop the IPv4 packet if the source 
        address is a broadcast IPv4 address.
              
    addressSrcMulticast(2)
        Drop the IPv4 packet if the source 
        address is a multicast IPv4 address.
              
    addressDestZero(3)
        Drop the IPv4 packet if the destination 
        address is 0.0.0.0.
              
    addressIdentical(4)
        Drop the IPv4 packet if the source IPv4 
        address is identical to destination IPv4 
        address.
              
    addressSrcReserved(5)
        Drop the IPv4 packet if the source address 
        is a reserved IPv4 address.
              
    addressClassE(6)
        Drop the IPv4 packet if either the source 
        address or destination address is a class E 
        IPv4 address.
              
    checksum(7)
        Drops the IPv4 packet if its checksum is invalid.
              
    protocol(8)
        Drop the IPv4 packet if the packet fragment 
        has an invalid IP protocol number
              
    fragment(9)
        Drop the IPv4 packet if the packet fragment 
        has a nonzero offset and the DF bit is active.
              
    lengthMinimum(10)
        Drop the IPv4 packet if the Ethernet frame 
        length is less than the IP packet length plus 
        four octets (the CRC length).
              
    lengthConsistent(11)
        Drop the IPv4 or IPv6 packet where the Ethernet 
        frame size is greater than or equal to the IP packet 
        length plus the Ethernet header.
              
    lengthMaximumFragment(12)
        Drop the IPv4 or IPv6 packet if the maximum 
        fragment offset is greater than 65536.
              
    lengthMaximumUdp(13)
        Drop the IPv4 or IPv6 packet if the IP payload 
        length is less than the UDP packet length.
              
    lengthMaximumTcp(14)
        Drop the IPv4 or IPv6 packet if the TCP length 
        is greater than the IP payload length.
              
    tcpFlags(15)
        Drop the IPv4 packet if verification of TCP 
        packet header fails.
              
    tcpTinyFlags(16)
        Drop the IPv4 or IPv6 packet if the IP fragment 
        offset is 1, or if the IP fragment offset is 0 
        and the IP payload length is less than 16.
              
    version(17)
        Drop the IPv4 packet if the Ethertype is not 
        set to 4 (IPv4); and drops the IPv6 packet if 
        the Ethertype is not set to 6 (IPv6).

Context

MIB
CISCO-HARDWARE-IP-VERIFY-MIB
OID
.1.3.6.1.4.1.9.9.804.1.1.1.2
Type
column
Access
noaccess
Status
current
Parent
chivIpVerifyEntry
Table
chivIpVerifyTable
Siblings
3

Syntax

Enumeration

Values & Constraints

Enumerated Values
1addressSrcBroadcast
2addressSrcMulticast
3addressDestZero
4addressIdentical
5addressSrcReserved
6addressClassE
7checksum
8protocol
9fragment
10lengthMinimum
11lengthConsistent
12lengthMaximumFragment
13lengthMaximumUdp
14lengthMaximumTcp
15tcpFlags
16tcpTinyFlags
17version

Related Objects

Sibling Objects