cGtpGSNService
CISCO-GTP-MIB ·
.1.3.6.1.4.1.9.9.188.1.1.1
Object
scalar
r/w
Bits
This object indicates the type of GPRS service that will be
enabled on the device:
undefined - the GPRS service functionality is turned off.
ggsn - the device will function as a GGSN.
sgsn - the device will function as SGSN.
gtpdirector - the device will function as GDM.
sgw - the device will function as a SGW in the
SAE architecture.
pgw - the device will function as a PGW in the
SAE architecture.
spgw - the device will function as a combined PGW and
SGW in the SAE architecture.
When the device is configured to function as GDM, all the other
objects in this MIB will not be accessible and the
CISCO-GTP-DIRECTOR-MIB should be used for managing the device.
Context
- MIB
- CISCO-GTP-MIB
- OID
.1.3.6.1.4.1.9.9.188.1.1.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cGtpConfigurations
- Siblings
- 16
Syntax
Bits
Values & Constraints
Enumerated Values
0 | undefined |
1 | sgsn |
2 | ggsn |
3 | gtpdirector |
4 | sgw |
5 | pgw |
6 | spgw |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cGtpMaximumPdps The maximum number of PDP contexts that can be activated
on the GSN. | scalar | PDP contexts Unsigned32 | .1.3.6.1.4.1.9.9.188.1.1.10 |
| cGtpNotifEnable Indicates whether cGtpNotifications notification will
be sent when a notification is generated by the device.
- 'true', it will enable the device to send a notification.
- 'f… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.188.1.1.11 |
| cGtpDynamicEchoTimerEnable This object indicates whether dynamic echo timer is used
by the GGSN.
- true : will enable the dynamic echo timer.
- false : will disable the dynamic echo timer. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.188.1.1.12 |
| cGtpDynamicEchoTimerMinTime This object specifies the minimum time used by the
dynamic echo timer. This object should be ignored
if cGtpDynamicEchoTimerEnable is set to 'false'. | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.188.1.1.13 |
| cGtpDynamicEchoTimerSmoothFactor This object specifies the smooth factor by which dynamic
echo timer can be adjusted. This object should be ignored
if cGtpDynamicEchoTimerEnable is set to 'false'. | scalar | Integer32 | .1.3.6.1.4.1.9.9.188.1.1.14 |
| cGtpPathHistoryLimit This object specifies the maximum number of entries in the
cGtpPathStatisticsHistoryTable. | scalar | CGtpMaxHistNumber | .1.3.6.1.4.1.9.9.188.1.1.15 |
| cGtpUpdateFailDelete This object specifies whether the delete action will
be taken when a COA initiated update request for QOS
change fails for a PDP context. If the object is set
to 'true' and the up… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.188.1.1.16 |
| cGtpSgsnProfileTable This table provides the configuration on SGSN profiles
identified by addresses and port numbers configured in
GGSN and the associated profile actions to be applied.
When an SGSN … | table | - | .1.3.6.1.4.1.9.9.188.1.1.18 |
| cGtpVersion The highest gtp version supported by the GSN.
When the value is,
version0 - GTP v0 is supported,
version1 - GTP v1 and GTP v0 are supported,
version2 - GTP … | scalar | CGtpVersion | .1.3.6.1.4.1.9.9.188.1.1.2 |
| cGtpT3TunnelTimer obsolete When the GSN behaves as SGSN, the T3-TUNNEL timer is used
for mobility management. When a roaming MS moves from one
SGSN(Old SGSN) to a another SGSN(New SGSN), this timer is
sta… | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.188.1.1.3 |
| cGtpT3ResponseTimer The T3-RESPONSE timer for retransmission. This timer
is started by a GSN, upon the transmission of a signalling
request message; it is used for message retransmission
purposes, … | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.188.1.1.4 |
| cGtpN3Request Maximum number of retransmissions for a signalling
request message if no corresponding response message
is received for a request in cGtpT3ResponseTimer time. | scalar | retransmissions Integer32 | .1.3.6.1.4.1.9.9.188.1.1.5 |
| cGtpN3BufferSize Maximum size of the receive buffer for G-PDUs and
signalling request messages. If a packet arrives with
more data bytes than the receive buffer can contain,
the packet will be d… | scalar | bytes Integer32 | .1.3.6.1.4.1.9.9.188.1.1.6 |
| cGtpEchoRequestTimerEnable This object indicates whether Echo Request timer
is used by the GGSN.
- true : will enable the Echo Request timer.
- false : will disable the Echo Request timer. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.188.1.1.7 |
| cGtpEchoRequestTimer The time interval to transmit 'Echo Request' message.
'Echo Response' message is normally received in response
to 'Echo Request' message. In the event of no response to
the 'Echo… | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.188.1.1.8 |
| cGtpGSNTotalBandwidthResrc obsolete The total amount of bandwidth resource on the GSN,
this total depends on various factors like system
throughput, memory size, maximum number of PDP contexts
supported. A portio… | scalar | bits/sec Unsigned32 | .1.3.6.1.4.1.9.9.188.1.1.9 |