cGtpDynamicEchoTimerEnable
CISCO-GTP-MIB ·
.1.3.6.1.4.1.9.9.188.1.1.12
Object
This object indicates whether dynamic echo timer is used by the GGSN. - true : will enable the dynamic echo timer. - false : will disable the dynamic echo timer.
Context
- MIB
- CISCO-GTP-MIB
- OID
.1.3.6.1.4.1.9.9.188.1.1.12- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cGtpConfigurations
- Siblings
- 16
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cGtpGSNService This object indicates the type of GPRS service that will be
enabled on the device:
undefined - the GPRS service functionality is turned off.
ggsn - the device will function … | scalar | Bits | .1.3.6.1.4.1.9.9.188.1.1.1 |
| cGtpMaximumPdps The maximum number of PDP contexts that can be activated
on the GSN. | scalar | PDP contexts Unsigned32 | .1.3.6.1.4.1.9.9.188.1.1.10 |
| cGtpNotifEnable Indicates whether cGtpNotifications notification will
be sent when a notification is generated by the device.
- 'true', it will enable the device to send a notification.
- 'f… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.188.1.1.11 |
| cGtpDynamicEchoTimerMinTime This object specifies the minimum time used by the
dynamic echo timer. This object should be ignored
if cGtpDynamicEchoTimerEnable is set to 'false'. | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.188.1.1.13 |
| cGtpDynamicEchoTimerSmoothFactor This object specifies the smooth factor by which dynamic
echo timer can be adjusted. This object should be ignored
if cGtpDynamicEchoTimerEnable is set to 'false'. | scalar | Integer32 | .1.3.6.1.4.1.9.9.188.1.1.14 |
| cGtpPathHistoryLimit This object specifies the maximum number of entries in the
cGtpPathStatisticsHistoryTable. | scalar | CGtpMaxHistNumber | .1.3.6.1.4.1.9.9.188.1.1.15 |
| cGtpUpdateFailDelete This object specifies whether the delete action will
be taken when a COA initiated update request for QOS
change fails for a PDP context. If the object is set
to 'true' and the up… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.188.1.1.16 |
| cGtpSgsnProfileTable This table provides the configuration on SGSN profiles
identified by addresses and port numbers configured in
GGSN and the associated profile actions to be applied.
When an SGSN … | table | - | .1.3.6.1.4.1.9.9.188.1.1.18 |
| cGtpVersion The highest gtp version supported by the GSN.
When the value is,
version0 - GTP v0 is supported,
version1 - GTP v1 and GTP v0 are supported,
version2 - GTP … | scalar | CGtpVersion | .1.3.6.1.4.1.9.9.188.1.1.2 |
| cGtpT3TunnelTimer obsolete When the GSN behaves as SGSN, the T3-TUNNEL timer is used
for mobility management. When a roaming MS moves from one
SGSN(Old SGSN) to a another SGSN(New SGSN), this timer is
sta… | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.188.1.1.3 |
| cGtpT3ResponseTimer The T3-RESPONSE timer for retransmission. This timer
is started by a GSN, upon the transmission of a signalling
request message; it is used for message retransmission
purposes, … | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.188.1.1.4 |
| cGtpN3Request Maximum number of retransmissions for a signalling
request message if no corresponding response message
is received for a request in cGtpT3ResponseTimer time. | scalar | retransmissions Integer32 | .1.3.6.1.4.1.9.9.188.1.1.5 |
| cGtpN3BufferSize Maximum size of the receive buffer for G-PDUs and
signalling request messages. If a packet arrives with
more data bytes than the receive buffer can contain,
the packet will be d… | scalar | bytes Integer32 | .1.3.6.1.4.1.9.9.188.1.1.6 |
| cGtpEchoRequestTimerEnable This object indicates whether Echo Request timer
is used by the GGSN.
- true : will enable the Echo Request timer.
- false : will disable the Echo Request timer. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.188.1.1.7 |
| cGtpEchoRequestTimer The time interval to transmit 'Echo Request' message.
'Echo Response' message is normally received in response
to 'Echo Request' message. In the event of no response to
the 'Echo… | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.188.1.1.8 |
| cGtpGSNTotalBandwidthResrc obsolete The total amount of bandwidth resource on the GSN,
this total depends on various factors like system
throughput, memory size, maximum number of PDP contexts
supported. A portio… | scalar | bits/sec Unsigned32 | .1.3.6.1.4.1.9.9.188.1.1.9 |