cgprsGtpT3ResponseTimer
CISCO-GPRS-GTP-MIB ·
.1.3.6.1.4.1.9.10.48.1.1.1.2
Object
scalar
obsolete
r/w
seconds Integer32
The T3-RESPONSE timer for retransmission. This timer is started by GGSN, upon the transmission of a signalling request message; it is used for message retransmission purposes, in the event that no response is received by the time the timer expires. Note that the total wait time (cgprsGtpT3ResponseTimer*cgprsGtpN3Requests) must be shorter than the Mobile System (MS) wait time between retries of Attach and RA Updates; The product of cgprsGtpT3ResponseTimer and cgprsGtpN3requests must be less than the minimum value of the Attach Timer(T3310) and the Routing Area Update timer(T3330). The cgprsGtpT3ResponseTimer timer, according to the standards, recommends an adaptive back-off mechanism, using increasing values, e.g., 1, 2, 4, and 8 seconds.
Context
- MIB
- CISCO-GPRS-GTP-MIB
- OID
.1.3.6.1.4.1.9.10.48.1.1.1.2- Type
- scalar
- Access
- readwrite
- Status
- obsolete
- Units
- seconds
- Parent
- cgprsGtpGeneralConfig
- Siblings
- 9
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 1-60
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cgprsGtpT3TunnelTimer obsolete The T3-TUNNEL timer for mobility management. This timer is
started by the 'Old SGSN'. Whilst the timer is running, the
T-PDUs received by the 'Old SGSN' (from the GGSN), and any… | scalar | seconds Integer32 | .1.3.6.1.4.1.9.10.48.1.1.1.1 |
| cgprsGtpPDPCxtActRejNotifEnable obsolete The object indicates whether the system produces the
cgprsGtpPDPCxtActivationRejNotif.A false value will
prevent the cgprsGtpPDPCxtActivationRejNotif
from being generated… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.48.1.1.1.10 |
| cgprsGtpN3Request obsolete The N3-REQUESTS value. Maximum number of times a signalling
request message is retransmitted in the event of no
corresponding response message. | scalar | messages Integer32 | .1.3.6.1.4.1.9.10.48.1.1.1.3 |
| cgprsGtpN3BufferSize obsolete The N3-BUFFER-SIZE value. This is the size of the receive
buffer for G-PDUs and signalling request messages. If a packet
arrives with more data bytes then the receive buffer can… | scalar | bytes Integer32 | .1.3.6.1.4.1.9.10.48.1.1.1.4 |
| cgprsGtpEchoRequestTimer obsolete The time interval to transmit 'Echo Request' message.
'Echo Response' message is normally received in response
to 'Echo Request' message. In the event of no response to the
'Echo … | scalar | seconds Integer32 | .1.3.6.1.4.1.9.10.48.1.1.1.5 |
| cgprsGtpGSNTotalBandwidthResrc obsolete The total amount of bandwidth resource on the GGSN. | scalar | bits/sec Integer32 | .1.3.6.1.4.1.9.10.48.1.1.1.6 |
| cgprsGtpMaxNumPDPCxts obsolete The Maximum number of PDP contexts allowed. The PDP context
contains the Session Management parameters that are necessary
to transfer between SGSNs at the Inter SGSN Routeing Upd… | scalar | PDP contexts Integer32 | .1.3.6.1.4.1.9.10.48.1.1.1.7 |
| cgprsGtpDroppedPktsMonTime obsolete The time duration for monitoring the excessive rate at which
packets are dropped by the GSN due to unknown GTP header
problem. | scalar | seconds Integer32 | .1.3.6.1.4.1.9.10.48.1.1.1.8 |
| cgprsGtpNoRespToEchoNotifEnable obsolete The object indicates whether the system produces the
cgprsGtpGSNEchoFailedNotif. A false value will prevent
the cgprsGtpGSNEchoFailedNotif from being generated
by this sys… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.48.1.1.1.9 |