cGgsnSADccaTxTimeout

Object

column r/w seconds SNMPv2-SMIUnsigned32

This object specifies the retransmit timer value for DCCA
client.
              
The retransmit timeout is to be used for CCR messages.  The 
DCCA specification defines a retransmit timer (Tx) that is 
used by the client to supervise the communication with 
the server, because for pre-paid services, the end user 
expects the response from the network in a reasonable time, 
thus the DCCA client shall react faster than the underlying  
base protocol.  When the retransmit timer elapses, the DCCA 
client will take an action on the PDP context depending on  
the current value of CCFH for that session. 
              
The retransmit timer is started with each CCR (initial) and 
CCR (update).  Since multiple CCR (update) messages are 
possible, if one CCR (update) message is pending, a subsequent 
CCR (update) message restart the timer.  When answer to all
pending CCR (update) messages are received, the retransmit 
timer is stopped.

Context

MIB: CISCO-GGSN-SERVICE-AWARE-MIB
OID: .1.3.6.1.4.1.9.9.497.1.3.2.1.6
Type: column
Access: readwrite
Status: current
Units: seconds
Parent: cGgsnSADccaProfileEntry
Table: cGgsnSADccaProfileTable
Siblings: 11

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cGgsnSADccaProfileName This object specifies the DCCA profile name. The GGSN contacts the DCCA server, for online billing, if the DCCA profile name is set in charging profile.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.497.1.3.2.1.1`
cGgsnSADccaTriggerPlmnChange The value of this object takes effect only when DCCA client is configured as standard specfic. - 'true': PLMN ID change is considered as trigger for quot…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.497.1.3.2.1.10`
cGgsnSADccaTriggerRatChange The value of this object takes effect only when DCCA client is configured as standard specfic. - 'true': RAT change is considered as trigger for quota re…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.497.1.3.2.1.11`
cGgsnSADccaTriggerUserLocChange The value of this object takes effect only when the object cGgsnSADcccClci is set to the value 'a3Gpp(1)' which indicates that the DCCA client is configured as standard specific. …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.497.1.3.2.1.12`
cGgsnSADccaAuthorization This object must be set to a valid value upon transition of the entry to the 'active' state. The object defines the authorization method list (given by AAA author…	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.497.1.3.2.1.2`
cGgsnSADccaCcfh This object specifies the CCFH attribute. The CCFH value governs the behavior of credit control client in fault situations. When the response is not received from the DCCA serv…	column	Enumeration	`.1.3.6.1.4.1.9.9.497.1.3.2.1.3`
cGgsnSADccaDestinationRealm Destination realm is to be sent within the CCR (Initial) request. This is the mandatory configuration while defining the row and can be changed when the row is still active. For …	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.497.1.3.2.1.4`
cGgsnSADccaSessionFailover This object specifies whether session failover is supported or not. If this object is set to 'false', credit control session will never be moved to an alternate s…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.497.1.3.2.1.5`
cGgsnSADccaTriggerSgsnChange This object takes effect only for generic DCCA implementation. For customer specific implementation it does not have any effect. - 'true': Then change in the SGSN …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.497.1.3.2.1.7`
cGgsnSADccaTriggerQosChange This object takes effect only for generic DCCA implementation. For customer specific implementation it does not have any effect. - 'true': QOS change is considered…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.497.1.3.2.1.8`
cGgsnSADccaRowStatus This object is used to create a new row or delete an existing row in this table.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.9.497.1.3.2.1.9`

Object

Context

Syntax

Values & Constraints

Related Objects