cGgsnSlbVserverTable

CISCO-GGSN-MIB · .1.3.6.1.4.1.9.9.240.1.3.23

Object

table

This table includes the different virtual servers
(IP address of virtual servers) and the
elements gives the interface to reach these servers.
          
The table is indexed on the vserver address.
          
The table objects can be modified, when the RowStatus
 (cGgsnSlbVserRowStatus) is active.

Context

MIB: CISCO-GGSN-MIB
OID: .1.3.6.1.4.1.9.9.240.1.3.23
Type: table
Status: current
Parent: cGgsnConfigurations
Siblings: 24
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cGgsnDefaultIpAllocationMethod Specifies the default method by which the GGSN obtains address leases for mobile user sessions. - 'disable', which indicates that dynamic address allocation is d…	scalar	Enumeration	`.1.3.6.1.4.1.9.9.240.1.3.1`
cGgsnImsConfigurations	node	-	`.1.3.6.1.4.1.9.9.240.1.3.10`
cGgsnMemoryThreshold GGSN memory overload protection is a mechanism to prevent GGSN from completely running out of memory when GGSN is running near its capacity or in some failure scenarios like CG do…	scalar	98304Bytes Unsigned32	`.1.3.6.1.4.1.9.9.240.1.3.11`
cGgsnServiceMode GGSN supports this GPRS service mode for maintenance purposes. Two modes are supported in GGSN, operational and maintenance mode. 'inService' mode represents nominal operation, a…	scalar	Enumeration	`.1.3.6.1.4.1.9.9.240.1.3.12`
cGgsnPlmnTable Mobile Country Code (MCC) and Mobile Network Code (MNC) together identify a GPRS PLMN of an operator. PLMN Ids other than home PLMNs are considered as foreign. There will be some …	table	-	`.1.3.6.1.4.1.9.9.240.1.3.13`
cGgsnSessionTimeout This object specifies the PDP context timeout value. The PDP context will be terminated after this timer expiry. The value present in this will have meaning when the ob…	scalar	seconds Unsigned32	`.1.3.6.1.4.1.9.9.240.1.3.14`
cGgsnThruputIntervalOne This object and cGgsnThruputIntervalTwo specifies the interval at which the data throughput needs to be collected per APN/SGSN. Once this object is set to some valid va…	scalar	minutes Unsigned32	`.1.3.6.1.4.1.9.9.240.1.3.15`
cGgsnThruputIntervalTwo This object specifies the time interval TWO for collecting the throughput per APN/SGSN. This object is same as cGgsnThruputIntervalOne. It's just an option for a second…	scalar	minutes Unsigned32	`.1.3.6.1.4.1.9.9.240.1.3.16`
cGgsnCompliance3GppGgsn deprecated This object specifies the compliance level for the particular GGSN version present in cGgsnVersion. This object can be used to set back the compliance level to the previous GGSN …	scalar	Enumeration	`.1.3.6.1.4.1.9.9.240.1.3.17`
cGgsnCreateReqV1UpdExistPdp deprecated This object is used for backward compatibility due to to implementation of CR 311. CR 311: The SGSN shall not send a Create PDP Context Request for an already active c…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.240.1.3.18`
cGgsnRadAttrSessTimeout This object is used for enabling the session timeout feature on the global (router) level set using cGgsnSessionTimeout, APN level (cgprsAccPtAbsoluteSessionTimer, which is defin…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.240.1.3.19`
cGgsnIdlePdpPurgeTimer This object specifies the time that the GGSN waits before purging idle PDP contexts. A value '0' will disable the purge timer.	scalar	hours Unsigned32	`.1.3.6.1.4.1.9.9.240.1.3.2`
cGgsnDownlinkVerifyMsDisable This object enables the feature which will allow the GGSN to route IP packets beyond MS. This works only if a static route is added in GGSN to the node beyond the MS. O…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.240.1.3.20`
cGgsnSlbMode GTP SLB can operate in two modes-dispatched and directed. - 'dispatched' mode: It forwards the create request without changing the destination IP address (vserver addre…	scalar	Enumeration	`.1.3.6.1.4.1.9.9.240.1.3.21`
cGgsnSlbNotif deprecated This object is used to enable or disable the GGSN behavior of sending CAC failure notification to SLB, or session failure notification to SLB. If this object is set to …	scalar	Enumeration	`.1.3.6.1.4.1.9.9.240.1.3.22`
cGgsnSlbNotifyCacFailure This object is used to enable or disable the GGSN behavior of sending CAC failure notification to SLB. CAC fails on GGSN if either the maximum number of PDPs reaches li…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.240.1.3.24`
cGgsnSlbNotifySessionDeletion This object is used to enable or disable the GGSN behavior of sending session deletion notification to SLB. If this object is set to 'true', GGSN sends delete notificat…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.240.1.3.25`
cGgsnIpDupProtectTable This table contains the range of IP address used in the GPRS PLMN. These IP addresses are used to avoid IP address duplication in GPRS network. IP address duplication occurs whe…	table	-	`.1.3.6.1.4.1.9.9.240.1.3.3`
cGgsnDefaultAggregTable This table contains the list of default aggregate routes configured on the GGSN. GGSN uses a static host route to forward user data packets for each PDP context received from Gi…	table	-	`.1.3.6.1.4.1.9.9.240.1.3.4`
cGgsnDefaultAaaAuthServerGroup This object specifies the AAA radius server group that is used for authentication by all APN's on this GGSN.	scalar	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.9.9.240.1.3.5`
cGgsnDefaultAaaAccServerGroup This object specifies the AAA radius server group that is used for accounting by all APN's on this GGSN.	scalar	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.9.9.240.1.3.6`
cGgsnPppVirtualTemplate This object represents the virtual template interface used by PPP Type PDP's.	scalar	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.9.9.240.1.3.7`
cGgsnPppRegenVirtualTemplate This object represents the virtual template interface used for PPP Regeneration by the APN's on which PPP Regeneration is configured. The value zero indicates that no …	scalar	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.9.9.240.1.3.8`
cGgsnPlmnIpAddrRangeTable This table contains the range of IP addresses that belong to the PLMN nodes in a GPRS network. This range does not include address of various entities like RADIUS, DHCP, DNS ser…	table	-	`.1.3.6.1.4.1.9.9.240.1.3.9`

Child Objects