ciscoFlashPartitionUpgradeMethod
CISCO-FLASH-MIB ·
.1.3.6.1.4.1.9.9.10.1.1.4.1.1.9
Object
column
Enumeration
Flash partition upgrade method, ie., method by which
new files can be downloaded into the partition.
FLH stands for Flash Load Helper, a feature provided
on run-from-Flash systems for upgrading Flash. This
feature uses the bootstrap code in ROMs to help in
automatic download.
This object should be retrieved if the partition
status is runFromFlash(2).
If the partition status is readOnly(1), the upgrade
method would depend on the reason for the readOnly
status. For eg., it may simply be a matter of installing
the programming jumper, or it may require execution of a
later version of software that supports the Flash chips.
unknown - the current system image does not know
how Flash can be programmed. A possible
method would be to reload the ROM image
and perform the upgrade manually.
rxbootFLH - the Flash Load Helper is available to
download files to Flash. A copy-to-flash
command can be used and this system image
will automatically reload the Rxboot image
in ROM and direct it to carry out the
download request.
direct - will be done directly by this image.
Context
- MIB
- CISCO-FLASH-MIB
- OID
.1.3.6.1.4.1.9.9.10.1.1.4.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ciscoFlashPartitionEntry
- Table
- ciscoFlashPartitionTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | unknown |
2 | rxbootFLH |
3 | direct |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ciscoFlashPartitionIndex Flash partition sequence number used to index within
table of initialized flash partitions. | column | Unsigned32 | .1.3.6.1.4.1.9.9.10.1.1.4.1.1.1 |
| ciscoFlashPartitionName Flash partition name used to refer to a partition
by the system. This can be any alpha-numeric character
string of the form AAAAAAAAnn, where A represents an
optional alpha charac… | column | OctetString | .1.3.6.1.4.1.9.9.10.1.1.4.1.1.10 |
| ciscoFlashPartitionNeedErasure This object indicates whether a partition requires
erasure before any write operations can be done in it.
A management station should therefore retrieve this
object prior to attem… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.10.1.1.4.1.1.11 |
| ciscoFlashPartitionFileNameLength Maximum file name length supported by the file
system.
Max file name length will depend on the file
system implemented. Today, all file systems
support a max length of at least 48… | column | Integer32 | .1.3.6.1.4.1.9.9.10.1.1.4.1.1.12 |
| ciscoFlashPartitionSizeExtended Flash partition size. It should be an integral
multiple of ciscoFlashDeviceMinPartitionSize.
If there is a single partition, this size will be equal
to ciscoFlashDeviceSize.
… | column | bytes HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.9.9.10.1.1.4.1.1.13 |
| ciscoFlashPartitionFreeSpaceExtended Free space within a Flash partition.
Note that the actual size of a file in Flash includes
a small overhead that represents the file system's
file header.
Certain file systems may… | column | bytes HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.9.9.10.1.1.4.1.1.14 |
| ciscoFlashPartitionLowSpaceNotifThreshold This object specifies the minimum threshold value in percentage
of free space for each partition. If the free space available
goes below this threshold value and if
ciscoFlashPart… | column | CISCO-QOS-PIB-MIBPercent | .1.3.6.1.4.1.9.9.10.1.1.4.1.1.15 |
| ciscoFlashPartitionStartChip Chip sequence number of first chip in partition.
Used as an index into the chip table. | column | Integer32 | .1.3.6.1.4.1.9.9.10.1.1.4.1.1.2 |
| ciscoFlashPartitionEndChip Chip sequence number of last chip in partition.
Used as an index into the chip table. | column | Integer32 | .1.3.6.1.4.1.9.9.10.1.1.4.1.1.3 |
| ciscoFlashPartitionSize Flash partition size. It should be an integral
multiple of ciscoFlashDeviceMinPartitionSize.
If there is a single partition, this size will be equal
to ciscoFlashDeviceSize.
… | column | bytes Unsigned32 | .1.3.6.1.4.1.9.9.10.1.1.4.1.1.4 |
| ciscoFlashPartitionFreeSpace Free space within a Flash partition.
Note that the actual size of a file in Flash includes
a small overhead that represents the file system's
file header.
Certain file systems may… | column | bytes SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.10.1.1.4.1.1.5 |
| ciscoFlashPartitionFileCount Count of all files in a flash partition. Both
good and bad (deleted or invalid checksum) files
will be included in this count. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.10.1.1.4.1.1.6 |
| ciscoFlashPartitionChecksumAlgorithm Checksum algorithm identifier for checksum method
used by the file system. Normally, this would be
fixed for a particular file system. When a file
system writes a file to Flash, i… | column | Enumeration | .1.3.6.1.4.1.9.9.10.1.1.4.1.1.7 |
| ciscoFlashPartitionStatus Flash partition status can be :
* readOnly if device is not programmable either because
chips could not be recognized or an erroneous mismatch
of chips was detected… | column | Enumeration | .1.3.6.1.4.1.9.9.10.1.1.4.1.1.8 |