ciscoFlashDeviceController

CISCO-FLASH-MIB · .1.3.6.1.4.1.9.9.10.1.1.2.1.9

Object

column OctetString

Flash device controller. The h/w card that actually
controls Flash read/write/erase. Relevant for the AGS+
systems where Flash may be controlled by the MC+, STR or
the ENVM cards, cards that may not actually contain the
Flash chips.
For systems that have removable PCMCIA flash cards that
are controlled by a PCMCIA controller chip, this object
may contain a description of that controller chip.
Where irrelevant (Flash is a direct memory mapped device
accessed directly by the main processor), this object will
have an empty (NULL) string.

Context

MIB: CISCO-FLASH-MIB
OID: .1.3.6.1.4.1.9.9.10.1.1.2.1.9
Type: column
Access: readonly
Status: current
Parent: ciscoFlashDeviceEntry
Table: ciscoFlashDeviceTable
Siblings: 16

Syntax

OctetString

Values & Constraints

Object Constraints

range: 0-64

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ciscoFlashDeviceIndex Flash device sequence number to index within the table of initialized flash devices. The lowest value should be 1. The highest should be less than or equal to the value of the cis…	column	Unsigned32	`.1.3.6.1.4.1.9.9.10.1.1.2.1.1`
ciscoFlashDeviceCard deprecated This object will point to an instance of a card entry in the cardTable. The card entry will give details about the card on which the Flash device is actually located. For most sys…	column	SNMPv2-TCInstancePointer	`.1.3.6.1.4.1.9.9.10.1.1.2.1.10`
ciscoFlashDeviceProgrammingJumper This object gives the state of a jumper (if present and can be determined) that controls the programming voltage called Vpp to the Flash device. Vpp is required for programming (e…	column	Enumeration	`.1.3.6.1.4.1.9.9.10.1.1.2.1.11`
ciscoFlashDeviceInitTime System time at which device was initialized. For fixed devices, this will be the system time at boot up. For removable devices, it will be the time at which the device was inserte…	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.9.9.10.1.1.2.1.12`
ciscoFlashDeviceRemovable Whether Flash device is removable. Generally, only PCMCIA Flash cards will be treated as removable. Socketed Flash chips and Flash SIMM modules will not be treated as removable. S…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.10.1.1.2.1.13`
ciscoFlashPhyEntIndex This object indicates the physical entity index of a physical entity in entPhysicalTable which the flash device actually located.	column	ENTITY-MIBPhysicalIndex	`.1.3.6.1.4.1.9.9.10.1.1.2.1.14`
ciscoFlashDeviceNameExtended Extended Flash device name whose size can be upto 255 characters. This name is used to refer to the device within the system. Flash operations get directed to a device based on th…	column	OctetString	`.1.3.6.1.4.1.9.9.10.1.1.2.1.15`
ciscoFlashDeviceSizeExtended Total size of the Flash device. For a removable device, the size will be zero if the device has been removed. This object is a 64-bit version of ciscoFlashDeviceSiz…	column	bytes HCNUM-TCCounterBasedGauge64	`.1.3.6.1.4.1.9.9.10.1.1.2.1.16`
ciscoFlashDeviceMinPartitionSizeExtended This object provides the minimum partition size supported for this device. This object is a 64-bit version of ciscoFlashDeviceMinPatitionSize.	column	HCNUM-TCCounterBasedGauge64	`.1.3.6.1.4.1.9.9.10.1.1.2.1.17`
ciscoFlashDeviceSize Total size of the Flash device. For a removable device, the size will be zero if the device has been removed. If the total size of the flash device is greater than …	column	bytes Unsigned32	`.1.3.6.1.4.1.9.9.10.1.1.2.1.2`
ciscoFlashDeviceMinPartitionSize This object will give the minimum partition size supported for this device. For systems that execute code directly out of Flash, the minimum partition size needs to be the bank si…	column	bytes Unsigned32	`.1.3.6.1.4.1.9.9.10.1.1.2.1.3`
ciscoFlashDeviceMaxPartitions Max number of partitions supported by the system for this Flash device. Default will be 1, which actually means that partitioning is not supported. Note that this value will be de…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.10.1.1.2.1.4`
ciscoFlashDevicePartitions Flash device partitions actually present. Number of partitions cannot exceed the minimum of ciscoFlashDeviceMaxPartitions and (ciscoFlashDeviceSize / ciscoFlashDeviceMinPartitionS…	column	Unsigned32	`.1.3.6.1.4.1.9.9.10.1.1.2.1.5`
ciscoFlashDeviceChipCount Total number of chips within the Flash device. The purpose of this object is to provide information upfront to a management station on how much chip info to expect and possibly he…	column	Integer32	`.1.3.6.1.4.1.9.9.10.1.1.2.1.6`
ciscoFlashDeviceName deprecated Flash device name. This name is used to refer to the device within the system. Flash operations get directed to a device based on this name. The system has a concept of a default …	column	OctetString	`.1.3.6.1.4.1.9.9.10.1.1.2.1.7`
ciscoFlashDeviceDescr Description of a Flash device. The description is meant to explain what the Flash device and its purpose is. Current values are: System flash - for the primary Flash used to sto…	column	OctetString	`.1.3.6.1.4.1.9.9.10.1.1.2.1.8`