cfmFcipLinkExtFiconTAVsanLOper2k
CISCO-FCIP-MGMT-EXT-MIB ·
.1.3.6.1.4.1.9.9.329.1.1.2.1.23
Object
column
CISCO-ZS-MIBFcList
The list of VSANs (in the range 1 through 2047) for which Ficon Tape Acceleration is operationally ON.
Context
- MIB
- CISCO-FCIP-MGMT-EXT-MIB
- OID
.1.3.6.1.4.1.9.9.329.1.1.2.1.23- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cfmFcipLinkExtEntry
- Table
- cfmFcipLinkExtTable
- Siblings
- 23
Syntax
CISCO-ZS-MIBFcList
- Source
- CISCO-ZS-MIBFcList
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..256
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cfmFcipLinkExtPassiveMode If the value is set to 'false' this link endpoint actively
tries to connect to the peer. If it is set to 'true' the link
endpoint waits for the peer to connect to it. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.329.1.1.2.1.1 |
| cfmFcipLinkExtDataQOSField The value to be set for the TOS field in IP header
for the TCP Data connection.
The cfmFcipLinkExtCntrlQOSField,cfmFcipLinkExtDataQOSField
must be set in the same SNMP set request… | column | Unsigned32 | .1.3.6.1.4.1.9.9.329.1.1.2.1.10 |
| cfmFcipLinkExtEthIfIndex The ifIndex of the interface on which this FCIP link was
initiated. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.329.1.1.2.1.11 |
| cfmFcipLinkExtWriteAccelerator The Write accelerator allows for enhancing SCSI write
performance.
If 'true', the FCIP Write accelerator is enabled on this link
If 'false' it is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.329.1.1.2.1.12 |
| cfmFcipLinkExtIPComp The configuration for the IP compression.
'none' - ip compression is disabled.
'highCompressionRatio' - indicates better compression
… | column | Enumeration | .1.3.6.1.4.1.9.9.329.1.1.2.1.13 |
| cfmFcipLinkExtTapeAccelerator The Tape accelerator allows for enhancing Tape write
performance.
If 'true', the FCIP Tape accelerator is enabled on this link
If 'false' it is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.329.1.1.2.1.14 |
| cfmFcipLinkExtFlowCtrlBufSize The flow control buffer size. | column | bytes Unsigned32 | .1.3.6.1.4.1.9.9.329.1.1.2.1.15 |
| cfmFcipLinkExtIPSec Indicates whether the IP Security has been turned on or
off on this link. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.329.1.1.2.1.16 |
| cfmFcipLinkExtPhyIfIndex The physical ifIndex of the interface on which this FCIP link
is currently bound. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.329.1.1.2.1.17 |
| cfmFcipLinkExtWriteAccOper When Write Acceleration is operationally off for the FCIP
link, the value of this object will be set to 'false'.
When Write Acceleration is operationally on for the FCIP
link, the… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.329.1.1.2.1.18 |
| cfmFcipLinkExtTapeAccOper When Tape Acceleration is operationally off for the FCIP
link, the value of this object will be set to 'false'.
When Tape Acceleration is operationally on for the FCIP
link, the v… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.329.1.1.2.1.19 |
| cfmFcipLinkExtNumTcpConn The maximum number of TCP connections allowed on this
link. | column | tcp connections Unsigned32 | .1.3.6.1.4.1.9.9.329.1.1.2.1.2 |
| cfmFcipLinkExtTapeReadAccOper This object represents the state of the Tape Read
Acceleration for an FCIP link. Tape Read Acceleration
is automatically operational when Tape Acceleration is
operational (cfmFci… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.329.1.1.2.1.20 |
| cfmFcipLinkExtFiconTAVsanL2k The list of VSANs (in the range 1 through 2047)
for which Ficon Tape Acceleration is configured.
Only VSANs with a cficonVsanEntry of CISCO-FICON-MIB
present can be configured for… | column | CISCO-ZS-MIBFcList | .1.3.6.1.4.1.9.9.329.1.1.2.1.21 |
| cfmFcipLinkExtFiconTAVsanL4k The list of VSANs (in the range 2048 through 4096)
for which Ficon Tape Acceleration is configured.
Only VSANs with a cficonVsanEntry of CISCO-FICON-MIB
present can be configured … | column | CISCO-ZS-MIBFcList | .1.3.6.1.4.1.9.9.329.1.1.2.1.22 |
| cfmFcipLinkExtFiconTAVsanLOper4k The list of VSANs (in the range 2048 through 4096)
for which Ficon Tape Acceleration is operationally
ON. | column | CISCO-ZS-MIBFcList | .1.3.6.1.4.1.9.9.329.1.1.2.1.24 |
| cfmFcipLinkExtCheckTimestamp The value is 'true', if the timestamp in FCIP header
is to checked. If 'false' the timestamp is ignored. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.329.1.1.2.1.3 |
| cfmFcipLinkExtTimestampTolerance The accepted time difference between the local time
and the timestamp value received in the FCIP header.
By default this value will be EDTOV/2. EDTOV is the
Error_Detect_Timeout V… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.329.1.1.2.1.4 |
| cfmFcipLinkExtTcpRemPort The remote TCP port to which the local FCIP entity will
connect if and when it initiates a TCP connection setup
for this link. | column | Integer32 | .1.3.6.1.4.1.9.9.329.1.1.2.1.5 |
| cfmFcipLinkExtLocalBPortEnable If the value is set to 'true', the B port mode is enabled
on the local FCIP link. If set to 'false' the B port mode
is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.329.1.1.2.1.6 |
| cfmFcipLinkExtSpecialFrameEnable If the value is set to 'true', the TCP active opener
initiates FCIP special frames and the TCP passive
opener responds to the FCIP special frames.
If it is set to 'false', the FCI… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.329.1.1.2.1.7 |
| cfmFcipLinkExtBPortKAEnable If the value is set to 'true', a message is
sent in response to a (Fibre Channel) ELS Echo
frame received from the peer. Some B Port
implementations use ELS Echo request/response … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.329.1.1.2.1.8 |
| cfmFcipLinkExtCntrlQOSField The value to be set for the TOS field in IP header
for the TCP control connection.
The cfmFcipLinkExtCntrlQOSField,cfmFcipLinkExtDataQOSField
must be set in the same SNMP set requ… | column | Unsigned32 | .1.3.6.1.4.1.9.9.329.1.1.2.1.9 |