fcRouteVerifyLock
CISCO-FC-ROUTE-MIB ·
.1.3.6.1.4.1.9.9.284.1.1.9
Object
This object is used to facilitate the verify action
performed using 'fcRouteVerifyAction' by multiple
managers.
The procedure to perform the action by the NMS is as
follows:
1. Retrieve the value of fcRouteVerifyLock.
2. Set the value of fcRouteVerifyLock to the retrieved
value, and in the same PDU provide the following
values:
fcRouteVerifyAction to 'verify(2)'
fcRouteVerifyType,fcRouteVerifyVsanID,
fcRouteVerifyRouteType and fcRouteVerifyModule.
Note, fcRouteVerifyModule is relevent only if
fcRouteVerifyType is either 'fibShadow(2)' or
fibHardware(3).
3. If the set fails repeat steps 1-2.
4. Retrieve the value of fcRouteVerifyLock and
fcRouteVerifyResult in the same pdu.
5. If 'fcRouteVerifyLock' value is not one greater than
the retrieved value of 'fcRouteVerifyLock' in step-1
than repeat steps 1-4.
Context
- MIB
- CISCO-FC-ROUTE-MIB
- OID
.1.3.6.1.4.1.9.9.284.1.1.9- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- fcRouteConfig
- Siblings
- 9
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fcRouteLastChangeTime The value of sysUpTime at the most recent time when a
conceptual row was created, modified, or deleted in
fcRouteTable.
If no change has occurred since the last restart of the
m… | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.284.1.1.1 |
| fcRouteTable The local system's Fibre Channel Routing table.
This table lists all the routes that is configured/
calculated at the local system.
Traffic through the TL-Port (translation port) … | table | - | .1.3.6.1.4.1.9.9.284.1.1.10 |
| fcRoutePreference The value of route preference.Route preference is the
value used to select one route over other when more than
one route to the same destination is learned from
different protoco… | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.284.1.1.2 |
| fcRouteVerifyAction The action to perform a consistency check of
fcRouteTable.
none (1) - no action
verify (2) - perform verify action
Writing verify(2) does a consistency check
of the fcRouteTabl… | scalar | Enumeration | .1.3.6.1.4.1.9.9.284.1.1.3 |
| fcRouteVerifyType The value used by fcRouteVerifyAction to perform the
consistency check of fcRouteTable with:
- route table in persistent database if value is pss(1)
- forwarding information base … | scalar | Enumeration | .1.3.6.1.4.1.9.9.284.1.1.4 |
| fcRouteVerifyModule This value identifies a particular line card module
according to that module's value of entPhysicalIndex in
the entPhysicalTable of the ENTITY-MIB (RFC 2737).
The forwarding inf… | scalar | ENTITY-MIBPhysicalIndex | .1.3.6.1.4.1.9.9.284.1.1.5 |
| fcRouteVerifyVsanID The value specifies the VSAN id. The fcRouteTable
entries and the entries in the table specified by
fcRouteVerifyType is checked for consistency for the
same VSAN id specified b… | scalar | Integer32 | .1.3.6.1.4.1.9.9.284.1.1.6 |
| fcRouteVerifyRouteType The value used by fcRouteVerifyAction to perform the
consistency check of fcRouteTable. If the value is
unicast(1) then only unicast entries in fcRouteTable
and the entries in the… | scalar | Enumeration | .1.3.6.1.4.1.9.9.284.1.1.7 |
| fcRouteVerifyResult The object displays the details of the first
inconsistency that occured from the check. If the check
passes successfully then this will be a zero-length
string. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.284.1.1.8 |