fcTrunkIfTable
CISCO-FC-FE-MIB ·
.1.3.6.1.4.1.9.9.289.1.1.3
Object
table
This table contains one entry for each trunking fibre channel port per VSAN. When the FC-port goes into trunking mode, the fibre channel switch creates one entry per FC-port for each active VSAN, from the allowed VSAN list for this port. The allowed VSAN list is configured using the objects, fcIfAllowedVsanList2k and fcIfAllowedVsanList4k. If an VSAN becomes inactive then the switch removes the corresponding entries from this table, if they exist.
Context
- MIB
- CISCO-FC-FE-MIB
- OID
.1.3.6.1.4.1.9.9.289.1.1.3- Type
- table
- Status
- current
- Parent
- cffFcFeConfig
- Siblings
- 22
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cffFcFeElementName The World-Wide Name of this fabric element. It's a
64-bit identifier and is unique worldwide. | scalar | CISCO-ST-TCFcNameId | .1.3.6.1.4.1.9.9.289.1.1.1 |
| fcIfElpRejectReasonCodeExpl The reason code explanation for the ELP reject. | scalar | Integer32 | .1.3.6.1.4.1.9.9.289.1.1.10 |
| fcIfCapOsmTable This table contains, one entry for each FC-Port
which is capable of operating in over subscription port
rate mode.
It contains information describing about what each
FC-port is in… | table | - | .1.3.6.1.4.1.9.9.289.1.1.11 |
| fcIfCapFrmTable This table contains, one entry for each FC-Port
which is capable of operating in Full Rate mode.
It contains information describing about what each
FC-port is inherently capable o… | table | - | .1.3.6.1.4.1.9.9.289.1.1.12 |
| fcIfRNIDInfoTable A table listing the peer node identification data per
port per VSAN. | table | - | .1.3.6.1.4.1.9.9.289.1.1.13 |
| fcIfGigETable This table contains one entry per fibre channel switch
Gigabit Ethernet (GigE) interface.
This table also provides an easy way to find out
whether a GigE interface is… | table | - | .1.3.6.1.4.1.9.9.289.1.1.14 |
| fcIfModuleTable This table is used for configuring the module specific features
for Fibre Channel modules (or whatever equivalent). | table | - | .1.3.6.1.4.1.9.9.289.1.1.15 |
| fcIfToggleCtrlConfigTable deprecated This table contains one entry per fibre channel interface. In
certain scenarios, when an interface in a system transitions to
a down state, it is likely for the interface to keep … | table | - | .1.3.6.1.4.1.9.9.289.1.1.16 |
| fcIfFlapCtrlConfigTable In certain scenarios, when an interface in a system
transitions to a down state due to a particular reason, it is
likely for the interface to keep flapping between up and down
s… | table | - | .1.3.6.1.4.1.9.9.289.1.1.17 |
| fcIfePortSlowportMonitorTimeout This object specifies the hardware slowport monitor timeout
value in milliseconds for E Ports. | scalar | milliseconds CISCO-TCCiscoMilliSeconds | .1.3.6.1.4.1.9.9.289.1.1.18 |
| fcIffPortSlowportMonitorTimeout This object specifies the hardware slowport monitor timeout
value in milliseconds for F Ports. | scalar | milliseconds CISCO-TCCiscoMilliSeconds | .1.3.6.1.4.1.9.9.289.1.1.19 |
| fcIfTable This table contains one entry per fibre channel switch
port interface. Each entry holds the port interface
parameters. The entries are created by the fabric
switch when a module… | table | - | .1.3.6.1.4.1.9.9.289.1.1.2 |
| fcIffPortNoCreditDropTimeout This object specifies the no-credit drop timeout
value in milliseconds for F Ports. | scalar | milliseconds CISCO-TCCiscoMilliSeconds | .1.3.6.1.4.1.9.9.289.1.1.20 |
| fcIfePortCongestionDropTimeout This object specifies the congestion drop timeout
value in milliseconds for E Ports. | scalar | milliseconds CISCO-TCCiscoMilliSeconds | .1.3.6.1.4.1.9.9.289.1.1.21 |
| fcIffPortCongestionDropTimeout This object specifies the congestion drop timeout
value in milliseconds for F Ports. | scalar | milliseconds CISCO-TCCiscoMilliSeconds | .1.3.6.1.4.1.9.9.289.1.1.22 |
| fcIfSysTransceiverPowerControl The transceiver power control setting on the platform.
notsupported(2): Read-only transceiver power control,
indicates that requested transceiver power control state
is not suppor… | scalar | Enumeration | .1.3.6.1.4.1.9.9.289.1.1.24 |
| fcIfLoginEntryCount The number of login entries in fcIfFLoginTable. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.289.1.1.4 |
| fcIfFLoginTable This table contains, one entry for each Nx_Port
attached to a particular FC-port in this VSAN in the
Fabric element.
Each entry contains services parameters established
from the … | table | - | .1.3.6.1.4.1.9.9.289.1.1.5 |
| fcIfElpTable This table contains, one entry for each local
Interconnect_Port that has performed Exchange Link
Parameters Switch Fabric Internal Link Service
exchange with its peer Interconnect… | table | - | .1.3.6.1.4.1.9.9.289.1.1.6 |
| fcIfCapTable This table contains, one entry for each FC-Port.
It contains information describing about what each
FC-port is inherently capable in its current
configuration of operating or sup… | table | - | .1.3.6.1.4.1.9.9.289.1.1.7 |
| adminTrunkProtocol The object to either enable or disable the trunking
protocol for the device. The trunking protocol is used
for negotiating trunk mode and calculating operational
VSANs on an EISL … | scalar | Enumeration | .1.3.6.1.4.1.9.9.289.1.1.8 |
| fcIfElpRejectReasonCode The reason code for the ELP reject. | scalar | Integer32 | .1.3.6.1.4.1.9.9.289.1.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fcTrunkIfEntry Each entry contains trunking FC-port parameters. | row | - | .1.3.6.1.4.1.9.9.289.1.1.3.1 |