fcIfToggleCtrlConfigTable

CISCO-FC-FE-MIB · .1.3.6.1.4.1.9.9.289.1.1.16

Object

table deprecated

This table contains one entry per fibre channel interface. In
certain scenarios, when an interface in a system transitions to
a down state, it is likely for the interface to keep toggling
and flapping between up and down states continuously. The
objects in each entry of this table help in controlling such
behaviour on an interface by stopping such frequent transitions
and holding the interface in down state, if a stipulated number
of such toggles happen in a given duration, as described in the
objects.

Context

MIB: CISCO-FC-FE-MIB
OID: .1.3.6.1.4.1.9.9.289.1.1.16
Type: table
Status: deprecated
Parent: cffFcFeConfig
Siblings: 22
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cffFcFeElementName The World-Wide Name of this fabric element. It's a 64-bit identifier and is unique worldwide.	scalar	CISCO-ST-TCFcNameId	`.1.3.6.1.4.1.9.9.289.1.1.1`
fcIfElpRejectReasonCodeExpl The reason code explanation for the ELP reject.	scalar	Integer32	`.1.3.6.1.4.1.9.9.289.1.1.10`
fcIfCapOsmTable This table contains, one entry for each FC-Port which is capable of operating in over subscription port rate mode. It contains information describing about what each FC-port is in…	table	-	`.1.3.6.1.4.1.9.9.289.1.1.11`
fcIfCapFrmTable This table contains, one entry for each FC-Port which is capable of operating in Full Rate mode. It contains information describing about what each FC-port is inherently capable o…	table	-	`.1.3.6.1.4.1.9.9.289.1.1.12`
fcIfRNIDInfoTable A table listing the peer node identification data per port per VSAN.	table	-	`.1.3.6.1.4.1.9.9.289.1.1.13`
fcIfGigETable This table contains one entry per fibre channel switch Gigabit Ethernet (GigE) interface. This table also provides an easy way to find out whether a GigE interface is…	table	-	`.1.3.6.1.4.1.9.9.289.1.1.14`
fcIfModuleTable This table is used for configuring the module specific features for Fibre Channel modules (or whatever equivalent).	table	-	`.1.3.6.1.4.1.9.9.289.1.1.15`
fcIfFlapCtrlConfigTable In certain scenarios, when an interface in a system transitions to a down state due to a particular reason, it is likely for the interface to keep flapping between up and down s…	table	-	`.1.3.6.1.4.1.9.9.289.1.1.17`
fcIfePortSlowportMonitorTimeout This object specifies the hardware slowport monitor timeout value in milliseconds for E Ports.	scalar	milliseconds CISCO-TCCiscoMilliSeconds	`.1.3.6.1.4.1.9.9.289.1.1.18`
fcIffPortSlowportMonitorTimeout This object specifies the hardware slowport monitor timeout value in milliseconds for F Ports.	scalar	milliseconds CISCO-TCCiscoMilliSeconds	`.1.3.6.1.4.1.9.9.289.1.1.19`
fcIfTable This table contains one entry per fibre channel switch port interface. Each entry holds the port interface parameters. The entries are created by the fabric switch when a module…	table	-	`.1.3.6.1.4.1.9.9.289.1.1.2`
fcIffPortNoCreditDropTimeout This object specifies the no-credit drop timeout value in milliseconds for F Ports.	scalar	milliseconds CISCO-TCCiscoMilliSeconds	`.1.3.6.1.4.1.9.9.289.1.1.20`
fcIfePortCongestionDropTimeout This object specifies the congestion drop timeout value in milliseconds for E Ports.	scalar	milliseconds CISCO-TCCiscoMilliSeconds	`.1.3.6.1.4.1.9.9.289.1.1.21`
fcIffPortCongestionDropTimeout This object specifies the congestion drop timeout value in milliseconds for F Ports.	scalar	milliseconds CISCO-TCCiscoMilliSeconds	`.1.3.6.1.4.1.9.9.289.1.1.22`
fcIfSysTransceiverPowerControl The transceiver power control setting on the platform. notsupported(2): Read-only transceiver power control, indicates that requested transceiver power control state is not suppor…	scalar	Enumeration	`.1.3.6.1.4.1.9.9.289.1.1.24`
fcTrunkIfTable This table contains one entry for each trunking fibre channel port per VSAN. When the FC-port goes into trunking mode, the fibre channel switch creates one entry per FC-port for e…	table	-	`.1.3.6.1.4.1.9.9.289.1.1.3`
fcIfLoginEntryCount The number of login entries in fcIfFLoginTable.	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.289.1.1.4`
fcIfFLoginTable This table contains, one entry for each Nx_Port attached to a particular FC-port in this VSAN in the Fabric element. Each entry contains services parameters established from the …	table	-	`.1.3.6.1.4.1.9.9.289.1.1.5`
fcIfElpTable This table contains, one entry for each local Interconnect_Port that has performed Exchange Link Parameters Switch Fabric Internal Link Service exchange with its peer Interconnect…	table	-	`.1.3.6.1.4.1.9.9.289.1.1.6`
fcIfCapTable This table contains, one entry for each FC-Port. It contains information describing about what each FC-port is inherently capable in its current configuration of operating or sup…	table	-	`.1.3.6.1.4.1.9.9.289.1.1.7`
adminTrunkProtocol The object to either enable or disable the trunking protocol for the device. The trunking protocol is used for negotiating trunk mode and calculating operational VSANs on an EISL …	scalar	Enumeration	`.1.3.6.1.4.1.9.9.289.1.1.8`
fcIfElpRejectReasonCode The reason code for the ELP reject.	scalar	Integer32	`.1.3.6.1.4.1.9.9.289.1.1.9`

Child Objects