fcIfSysTransceiverPowerControl
CISCO-FC-FE-MIB ·
.1.3.6.1.4.1.9.9.289.1.1.24
Object
scalar
r/w
Enumeration
The transceiver power control setting on the platform. notsupported(2): Read-only transceiver power control, indicates that requested transceiver power control state is not supported for this platform.
Context
- MIB
- CISCO-FC-FE-MIB
- OID
.1.3.6.1.4.1.9.9.289.1.1.24- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cffFcFeConfig
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | off |
1 | on |
2 | notSupported |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cffFcFeElementName The World-Wide Name of this fabric element. It's a
64-bit identifier and is unique worldwide. | scalar | CISCO-ST-TCFcNameId | .1.3.6.1.4.1.9.9.289.1.1.1 |
| fcIfElpRejectReasonCodeExpl The reason code explanation for the ELP reject. | scalar | Integer32 | .1.3.6.1.4.1.9.9.289.1.1.10 |
| fcIfCapOsmTable This table contains, one entry for each FC-Port
which is capable of operating in over subscription port
rate mode.
It contains information describing about what each
FC-port is in… | table | - | .1.3.6.1.4.1.9.9.289.1.1.11 |
| fcIfCapFrmTable This table contains, one entry for each FC-Port
which is capable of operating in Full Rate mode.
It contains information describing about what each
FC-port is inherently capable o… | table | - | .1.3.6.1.4.1.9.9.289.1.1.12 |
| fcIfRNIDInfoTable A table listing the peer node identification data per
port per VSAN. | table | - | .1.3.6.1.4.1.9.9.289.1.1.13 |
| fcIfGigETable This table contains one entry per fibre channel switch
Gigabit Ethernet (GigE) interface.
This table also provides an easy way to find out
whether a GigE interface is… | table | - | .1.3.6.1.4.1.9.9.289.1.1.14 |
| fcIfModuleTable This table is used for configuring the module specific features
for Fibre Channel modules (or whatever equivalent). | table | - | .1.3.6.1.4.1.9.9.289.1.1.15 |
| fcIfToggleCtrlConfigTable deprecated This table contains one entry per fibre channel interface. In
certain scenarios, when an interface in a system transitions to
a down state, it is likely for the interface to keep … | table | - | .1.3.6.1.4.1.9.9.289.1.1.16 |
| fcIfFlapCtrlConfigTable In certain scenarios, when an interface in a system
transitions to a down state due to a particular reason, it is
likely for the interface to keep flapping between up and down
s… | table | - | .1.3.6.1.4.1.9.9.289.1.1.17 |
| fcIfePortSlowportMonitorTimeout This object specifies the hardware slowport monitor timeout
value in milliseconds for E Ports. | scalar | milliseconds CISCO-TCCiscoMilliSeconds | .1.3.6.1.4.1.9.9.289.1.1.18 |
| fcIffPortSlowportMonitorTimeout This object specifies the hardware slowport monitor timeout
value in milliseconds for F Ports. | scalar | milliseconds CISCO-TCCiscoMilliSeconds | .1.3.6.1.4.1.9.9.289.1.1.19 |
| fcIfTable This table contains one entry per fibre channel switch
port interface. Each entry holds the port interface
parameters. The entries are created by the fabric
switch when a module… | table | - | .1.3.6.1.4.1.9.9.289.1.1.2 |
| fcIffPortNoCreditDropTimeout This object specifies the no-credit drop timeout
value in milliseconds for F Ports. | scalar | milliseconds CISCO-TCCiscoMilliSeconds | .1.3.6.1.4.1.9.9.289.1.1.20 |
| fcIfePortCongestionDropTimeout This object specifies the congestion drop timeout
value in milliseconds for E Ports. | scalar | milliseconds CISCO-TCCiscoMilliSeconds | .1.3.6.1.4.1.9.9.289.1.1.21 |
| fcIffPortCongestionDropTimeout This object specifies the congestion drop timeout
value in milliseconds for F Ports. | scalar | milliseconds CISCO-TCCiscoMilliSeconds | .1.3.6.1.4.1.9.9.289.1.1.22 |
| fcTrunkIfTable This table contains one entry for each trunking fibre
channel port per VSAN. When the FC-port goes
into trunking mode, the fibre channel switch creates
one entry per FC-port for e… | table | - | .1.3.6.1.4.1.9.9.289.1.1.3 |
| fcIfLoginEntryCount The number of login entries in fcIfFLoginTable. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.289.1.1.4 |
| fcIfFLoginTable This table contains, one entry for each Nx_Port
attached to a particular FC-port in this VSAN in the
Fabric element.
Each entry contains services parameters established
from the … | table | - | .1.3.6.1.4.1.9.9.289.1.1.5 |
| fcIfElpTable This table contains, one entry for each local
Interconnect_Port that has performed Exchange Link
Parameters Switch Fabric Internal Link Service
exchange with its peer Interconnect… | table | - | .1.3.6.1.4.1.9.9.289.1.1.6 |
| fcIfCapTable This table contains, one entry for each FC-Port.
It contains information describing about what each
FC-port is inherently capable in its current
configuration of operating or sup… | table | - | .1.3.6.1.4.1.9.9.289.1.1.7 |
| adminTrunkProtocol The object to either enable or disable the trunking
protocol for the device. The trunking protocol is used
for negotiating trunk mode and calculating operational
VSANs on an EISL … | scalar | Enumeration | .1.3.6.1.4.1.9.9.289.1.1.8 |
| fcIfElpRejectReasonCode The reason code for the ELP reject. | scalar | Integer32 | .1.3.6.1.4.1.9.9.289.1.1.9 |