fcIfModuleTable

CISCO-FC-FE-MIB · .1.3.6.1.4.1.9.9.289.1.1.15

Object

table

This table is used for configuring the module specific features
for Fibre Channel modules (or whatever equivalent).

Context

MIB: CISCO-FC-FE-MIB
OID: .1.3.6.1.4.1.9.9.289.1.1.15
Type: table
Status: current
Parent: cffFcFeConfig
Siblings: 22
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cffFcFeElementName The World-Wide Name of this fabric element. It's a 64-bit identifier and is unique worldwide.	scalar	CISCO-ST-TCFcNameId	`.1.3.6.1.4.1.9.9.289.1.1.1`
fcIfElpRejectReasonCodeExpl The reason code explanation for the ELP reject.	scalar	Integer32	`.1.3.6.1.4.1.9.9.289.1.1.10`
fcIfCapOsmTable This table contains, one entry for each FC-Port which is capable of operating in over subscription port rate mode. It contains information describing about what each FC-port is in…	table	-	`.1.3.6.1.4.1.9.9.289.1.1.11`
fcIfCapFrmTable This table contains, one entry for each FC-Port which is capable of operating in Full Rate mode. It contains information describing about what each FC-port is inherently capable o…	table	-	`.1.3.6.1.4.1.9.9.289.1.1.12`
fcIfRNIDInfoTable A table listing the peer node identification data per port per VSAN.	table	-	`.1.3.6.1.4.1.9.9.289.1.1.13`
fcIfGigETable This table contains one entry per fibre channel switch Gigabit Ethernet (GigE) interface. This table also provides an easy way to find out whether a GigE interface is…	table	-	`.1.3.6.1.4.1.9.9.289.1.1.14`
fcIfToggleCtrlConfigTable deprecated This table contains one entry per fibre channel interface. In certain scenarios, when an interface in a system transitions to a down state, it is likely for the interface to keep …	table	-	`.1.3.6.1.4.1.9.9.289.1.1.16`
fcIfFlapCtrlConfigTable In certain scenarios, when an interface in a system transitions to a down state due to a particular reason, it is likely for the interface to keep flapping between up and down s…	table	-	`.1.3.6.1.4.1.9.9.289.1.1.17`
fcIfePortSlowportMonitorTimeout This object specifies the hardware slowport monitor timeout value in milliseconds for E Ports.	scalar	milliseconds CISCO-TCCiscoMilliSeconds	`.1.3.6.1.4.1.9.9.289.1.1.18`
fcIffPortSlowportMonitorTimeout This object specifies the hardware slowport monitor timeout value in milliseconds for F Ports.	scalar	milliseconds CISCO-TCCiscoMilliSeconds	`.1.3.6.1.4.1.9.9.289.1.1.19`
fcIfTable This table contains one entry per fibre channel switch port interface. Each entry holds the port interface parameters. The entries are created by the fabric switch when a module…	table	-	`.1.3.6.1.4.1.9.9.289.1.1.2`
fcIffPortNoCreditDropTimeout This object specifies the no-credit drop timeout value in milliseconds for F Ports.	scalar	milliseconds CISCO-TCCiscoMilliSeconds	`.1.3.6.1.4.1.9.9.289.1.1.20`
fcIfePortCongestionDropTimeout This object specifies the congestion drop timeout value in milliseconds for E Ports.	scalar	milliseconds CISCO-TCCiscoMilliSeconds	`.1.3.6.1.4.1.9.9.289.1.1.21`
fcIffPortCongestionDropTimeout This object specifies the congestion drop timeout value in milliseconds for F Ports.	scalar	milliseconds CISCO-TCCiscoMilliSeconds	`.1.3.6.1.4.1.9.9.289.1.1.22`
fcIfSysTransceiverPowerControl The transceiver power control setting on the platform. notsupported(2): Read-only transceiver power control, indicates that requested transceiver power control state is not suppor…	scalar	Enumeration	`.1.3.6.1.4.1.9.9.289.1.1.24`
fcTrunkIfTable This table contains one entry for each trunking fibre channel port per VSAN. When the FC-port goes into trunking mode, the fibre channel switch creates one entry per FC-port for e…	table	-	`.1.3.6.1.4.1.9.9.289.1.1.3`
fcIfLoginEntryCount The number of login entries in fcIfFLoginTable.	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.289.1.1.4`
fcIfFLoginTable This table contains, one entry for each Nx_Port attached to a particular FC-port in this VSAN in the Fabric element. Each entry contains services parameters established from the …	table	-	`.1.3.6.1.4.1.9.9.289.1.1.5`
fcIfElpTable This table contains, one entry for each local Interconnect_Port that has performed Exchange Link Parameters Switch Fabric Internal Link Service exchange with its peer Interconnect…	table	-	`.1.3.6.1.4.1.9.9.289.1.1.6`
fcIfCapTable This table contains, one entry for each FC-Port. It contains information describing about what each FC-port is inherently capable in its current configuration of operating or sup…	table	-	`.1.3.6.1.4.1.9.9.289.1.1.7`
adminTrunkProtocol The object to either enable or disable the trunking protocol for the device. The trunking protocol is used for negotiating trunk mode and calculating operational VSANs on an EISL …	scalar	Enumeration	`.1.3.6.1.4.1.9.9.289.1.1.8`
fcIfElpRejectReasonCode The reason code for the ELP reject.	scalar	Integer32	`.1.3.6.1.4.1.9.9.289.1.1.9`

Child Objects