fcIfCapTable
CISCO-FC-FE-MIB ·
.1.3.6.1.4.1.9.9.289.1.1.7
Object
table
This table contains, one entry for each FC-Port. It contains information describing about what each FC-port is inherently capable in its current configuration of operating or supporting. Entries in this table are created/deleted on an as-needed basis by the agent. This table shows the capability of this port hardware as currently configured. NOTE: This table has objects which represent the characteristics of a physical port. Thus, Port Channel ports are not represented in this table. The recommended method to get the current capability for the objects affected by the setting of fcIfPortRateMode is to inspect the relevant objects in whichever table corresponds to the value of fcIfPortRateMode. As a result, the relevant objects in this table have been deprecated.
Context
- MIB
- CISCO-FC-FE-MIB
- OID
.1.3.6.1.4.1.9.9.289.1.1.7- Type
- table
- Status
- current
- Parent
- cffFcFeConfig
- Siblings
- 22
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cffFcFeElementName The World-Wide Name of this fabric element. It's a
64-bit identifier and is unique worldwide. | scalar | CISCO-ST-TCFcNameId | .1.3.6.1.4.1.9.9.289.1.1.1 |
| fcIfElpRejectReasonCodeExpl The reason code explanation for the ELP reject. | scalar | Integer32 | .1.3.6.1.4.1.9.9.289.1.1.10 |
| fcIfCapOsmTable This table contains, one entry for each FC-Port
which is capable of operating in over subscription port
rate mode.
It contains information describing about what each
FC-port is in… | table | - | .1.3.6.1.4.1.9.9.289.1.1.11 |
| fcIfCapFrmTable This table contains, one entry for each FC-Port
which is capable of operating in Full Rate mode.
It contains information describing about what each
FC-port is inherently capable o… | table | - | .1.3.6.1.4.1.9.9.289.1.1.12 |
| fcIfRNIDInfoTable A table listing the peer node identification data per
port per VSAN. | table | - | .1.3.6.1.4.1.9.9.289.1.1.13 |
| fcIfGigETable This table contains one entry per fibre channel switch
Gigabit Ethernet (GigE) interface.
This table also provides an easy way to find out
whether a GigE interface is… | table | - | .1.3.6.1.4.1.9.9.289.1.1.14 |
| fcIfModuleTable This table is used for configuring the module specific features
for Fibre Channel modules (or whatever equivalent). | table | - | .1.3.6.1.4.1.9.9.289.1.1.15 |
| fcIfToggleCtrlConfigTable deprecated This table contains one entry per fibre channel interface. In
certain scenarios, when an interface in a system transitions to
a down state, it is likely for the interface to keep … | table | - | .1.3.6.1.4.1.9.9.289.1.1.16 |
| fcIfFlapCtrlConfigTable In certain scenarios, when an interface in a system
transitions to a down state due to a particular reason, it is
likely for the interface to keep flapping between up and down
s… | table | - | .1.3.6.1.4.1.9.9.289.1.1.17 |
| fcIfePortSlowportMonitorTimeout This object specifies the hardware slowport monitor timeout
value in milliseconds for E Ports. | scalar | milliseconds CISCO-TCCiscoMilliSeconds | .1.3.6.1.4.1.9.9.289.1.1.18 |
| fcIffPortSlowportMonitorTimeout This object specifies the hardware slowport monitor timeout
value in milliseconds for F Ports. | scalar | milliseconds CISCO-TCCiscoMilliSeconds | .1.3.6.1.4.1.9.9.289.1.1.19 |
| fcIfTable This table contains one entry per fibre channel switch
port interface. Each entry holds the port interface
parameters. The entries are created by the fabric
switch when a module… | table | - | .1.3.6.1.4.1.9.9.289.1.1.2 |
| fcIffPortNoCreditDropTimeout This object specifies the no-credit drop timeout
value in milliseconds for F Ports. | scalar | milliseconds CISCO-TCCiscoMilliSeconds | .1.3.6.1.4.1.9.9.289.1.1.20 |
| fcIfePortCongestionDropTimeout This object specifies the congestion drop timeout
value in milliseconds for E Ports. | scalar | milliseconds CISCO-TCCiscoMilliSeconds | .1.3.6.1.4.1.9.9.289.1.1.21 |
| fcIffPortCongestionDropTimeout This object specifies the congestion drop timeout
value in milliseconds for F Ports. | scalar | milliseconds CISCO-TCCiscoMilliSeconds | .1.3.6.1.4.1.9.9.289.1.1.22 |
| fcIfSysTransceiverPowerControl The transceiver power control setting on the platform.
notsupported(2): Read-only transceiver power control,
indicates that requested transceiver power control state
is not suppor… | scalar | Enumeration | .1.3.6.1.4.1.9.9.289.1.1.24 |
| fcTrunkIfTable This table contains one entry for each trunking fibre
channel port per VSAN. When the FC-port goes
into trunking mode, the fibre channel switch creates
one entry per FC-port for e… | table | - | .1.3.6.1.4.1.9.9.289.1.1.3 |
| fcIfLoginEntryCount The number of login entries in fcIfFLoginTable. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.289.1.1.4 |
| fcIfFLoginTable This table contains, one entry for each Nx_Port
attached to a particular FC-port in this VSAN in the
Fabric element.
Each entry contains services parameters established
from the … | table | - | .1.3.6.1.4.1.9.9.289.1.1.5 |
| fcIfElpTable This table contains, one entry for each local
Interconnect_Port that has performed Exchange Link
Parameters Switch Fabric Internal Link Service
exchange with its peer Interconnect… | table | - | .1.3.6.1.4.1.9.9.289.1.1.6 |
| adminTrunkProtocol The object to either enable or disable the trunking
protocol for the device. The trunking protocol is used
for negotiating trunk mode and calculating operational
VSANs on an EISL … | scalar | Enumeration | .1.3.6.1.4.1.9.9.289.1.1.8 |
| fcIfElpRejectReasonCode The reason code for the ELP reject. | scalar | Integer32 | .1.3.6.1.4.1.9.9.289.1.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fcIfCapEntry Each entry contains the Capability of a FC-Port. | row | - | .1.3.6.1.4.1.9.9.289.1.1.7.1 |