fcIfCapISLRxBbCreditMax
CISCO-FC-FE-MIB ·
.1.3.6.1.4.1.9.9.289.1.1.7.1.12
Object
column
deprecated
buffers FcBbCredit
The maximum number of receive buffers the port hardware is capable of receiving from the attached Inter Connect port. This object is applicable to ports operating in xE_port mode.
Context
- MIB
- CISCO-FC-FE-MIB
- OID
.1.3.6.1.4.1.9.9.289.1.1.7.1.12- Type
- column
- Access
- readonly
- Status
- deprecated
- Units
- buffers
- Parent
- fcIfCapEntry
- Table
- fcIfCapTable
- Siblings
- 21
Syntax
buffers FcBbCredit
- Source
- FcBbCredit
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..32767
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fcIfCapFcphVersionHigh The highest version of FC-PH that the FC-Port is
capable of supporting. | column | FcphVersion | .1.3.6.1.4.1.9.9.289.1.1.7.1.1 |
| fcIfCapHoldTimeMax The maximum holding time ( in microseconds ) that the
FC-Port is capable of supporting. | column | CISCO-TCMicroSeconds | .1.3.6.1.4.1.9.9.289.1.1.7.1.10 |
| fcIfCapHoldTimeMin The minimum holding time ( in microseconds ) that the
FC-Port is capable of supporting. | column | CISCO-TCMicroSeconds | .1.3.6.1.4.1.9.9.289.1.1.7.1.11 |
| fcIfCapISLRxBbCreditMin deprecated The minimum number of receive buffers the port
hardware is capable of receiving from the
attached xE_port or B_port. This object is
applicable to ports operating in xE_port mode. | column | buffers FcBbCredit | .1.3.6.1.4.1.9.9.289.1.1.7.1.13 |
| fcIfCapRxBbCreditWriteable deprecated The value indicating whether the port is capable
of allowing the user to configure receive buffer to
buffer credit.
The values configured for the objects:
fcIfAdminRxBbCredit, fc… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.289.1.1.7.1.14 |
| fcIfCapRxBbCreditDefault deprecated The default receive buffer-to-buffer credits if
the port is operating in Fx mode. | column | buffers FcBbCredit | .1.3.6.1.4.1.9.9.289.1.1.7.1.15 |
| fcIfCapISLRxBbCreditDefault deprecated The default receive buffer-to-buffer credits if
the port is operating in xE_port mode. | column | buffers FcBbCredit | .1.3.6.1.4.1.9.9.289.1.1.7.1.16 |
| fcIfCapBbScnCapable Indicates whether this interface is capable of
handling buffer-to-buffer state change number.
'true' : capable of handling.
'false' : it is not capable of handling it. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.289.1.1.7.1.17 |
| fcIfCapBbScnMax The maximum buffer-to-buffer state change number
this interface can handle. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.289.1.1.7.1.18 |
| fcIfCapOsmFrmCapable This value indicates whether this interface is
capable to operate in different port rate modes.
'true' : the port is capable of being configured
with the mode it is to op… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.289.1.1.7.1.19 |
| fcIfCapFcphVersionLow The lowest version of FC-PH that the FC-Port is
capable of supporting. | column | FcphVersion | .1.3.6.1.4.1.9.9.289.1.1.7.1.2 |
| fcIfIsServiceStateCapable Indicates whether this interface is capable of
handling service state change.
'true' : capable of changing the service state of the
interface. This means that the user … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.289.1.1.7.1.20 |
| fcIfIsPortRateModeCapable Indicates whether this interface is capable of
being configured in either of 'dedicated' or
'shared' port rate modes.
'true' : capable of changing the port rate mode of the … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.289.1.1.7.1.21 |
| fcIfIsAdminRxBbCreditExtendedCapable Indicates whether extended buffer-to-buffer credit
feature can be enabled on a given interface.
'true' : capable of changing the extended buffer-to-buffer
credits on… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.289.1.1.7.1.22 |
| fcIfCapRxBbCreditMax deprecated The maximum number of receive buffers the port
hardware is capable of receiving
from the attached Nx_Port. This object is
applicable to ports operating in Fx mode. | column | buffers FcBbCredit | .1.3.6.1.4.1.9.9.289.1.1.7.1.3 |
| fcIfCapRxBbCreditMin deprecated The minimum number of receive buffers the port
hardware is capable of receiving from
the attached Nx_Port. This object is applicable
to ports operating in Fx mode. | column | buffers FcBbCredit | .1.3.6.1.4.1.9.9.289.1.1.7.1.4 |
| fcIfCapRxDataFieldSizeMax The maximum size in bytes of the Data Field in a frame
that the FC-Port is capable of receiving from its
attached FC-port. | column | FcRxDataFieldSize | .1.3.6.1.4.1.9.9.289.1.1.7.1.5 |
| fcIfCapRxDataFieldSizeMin The minimum size in bytes of the Data Field in a frame
that the FC-Port is capable of receiving from its
attached FC-port. | column | FcRxDataFieldSize | .1.3.6.1.4.1.9.9.289.1.1.7.1.6 |
| fcIfCapCos The Bit mask indicating the set of Classes of Service
that the FC-Port is capable of supporting. | column | CISCO-ST-TCFcClassOfServices | .1.3.6.1.4.1.9.9.289.1.1.7.1.7 |
| fcIfCapClass2SeqDeliv The flag indicating whether or not the FC-Port is
capable of supporting Class 2 Sequential Delivery. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.289.1.1.7.1.8 |
| fcIfCapClass3SeqDeliv The flag indicating whether or not the FC-Port is
capable of supporting Class 3 Sequential Delivery. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.289.1.1.7.1.9 |