fcIfCapHoldTimeMax
CISCO-FC-FE-MIB ·
.1.3.6.1.4.1.9.9.289.1.1.7.1.10
Object
column
CISCO-TCMicroSeconds
The maximum holding time ( in microseconds ) that the FC-Port is capable of supporting.
Context
- MIB
- CISCO-FC-FE-MIB
- OID
.1.3.6.1.4.1.9.9.289.1.1.7.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fcIfCapEntry
- Table
- fcIfCapTable
- Siblings
- 21
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fcIfCapFcphVersionHigh The highest version of FC-PH that the FC-Port is
capable of supporting. | column | FcphVersion | .1.3.6.1.4.1.9.9.289.1.1.7.1.1 |
| fcIfCapHoldTimeMin The minimum holding time ( in microseconds ) that the
FC-Port is capable of supporting. | column | CISCO-TCMicroSeconds | .1.3.6.1.4.1.9.9.289.1.1.7.1.11 |
| fcIfCapISLRxBbCreditMax deprecated The maximum number of receive buffers the port
hardware is capable of receiving from
the attached Inter Connect port. This object
is applicable to ports operating in xE_port m… | column | buffers FcBbCredit | .1.3.6.1.4.1.9.9.289.1.1.7.1.12 |
| fcIfCapISLRxBbCreditMin deprecated The minimum number of receive buffers the port
hardware is capable of receiving from the
attached xE_port or B_port. This object is
applicable to ports operating in xE_port mode. | column | buffers FcBbCredit | .1.3.6.1.4.1.9.9.289.1.1.7.1.13 |
| fcIfCapRxBbCreditWriteable deprecated The value indicating whether the port is capable
of allowing the user to configure receive buffer to
buffer credit.
The values configured for the objects:
fcIfAdminRxBbCredit, fc… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.289.1.1.7.1.14 |
| fcIfCapRxBbCreditDefault deprecated The default receive buffer-to-buffer credits if
the port is operating in Fx mode. | column | buffers FcBbCredit | .1.3.6.1.4.1.9.9.289.1.1.7.1.15 |
| fcIfCapISLRxBbCreditDefault deprecated The default receive buffer-to-buffer credits if
the port is operating in xE_port mode. | column | buffers FcBbCredit | .1.3.6.1.4.1.9.9.289.1.1.7.1.16 |
| fcIfCapBbScnCapable Indicates whether this interface is capable of
handling buffer-to-buffer state change number.
'true' : capable of handling.
'false' : it is not capable of handling it. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.289.1.1.7.1.17 |
| fcIfCapBbScnMax The maximum buffer-to-buffer state change number
this interface can handle. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.289.1.1.7.1.18 |
| fcIfCapOsmFrmCapable This value indicates whether this interface is
capable to operate in different port rate modes.
'true' : the port is capable of being configured
with the mode it is to op… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.289.1.1.7.1.19 |
| fcIfCapFcphVersionLow The lowest version of FC-PH that the FC-Port is
capable of supporting. | column | FcphVersion | .1.3.6.1.4.1.9.9.289.1.1.7.1.2 |
| fcIfIsServiceStateCapable Indicates whether this interface is capable of
handling service state change.
'true' : capable of changing the service state of the
interface. This means that the user … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.289.1.1.7.1.20 |
| fcIfIsPortRateModeCapable Indicates whether this interface is capable of
being configured in either of 'dedicated' or
'shared' port rate modes.
'true' : capable of changing the port rate mode of the … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.289.1.1.7.1.21 |
| fcIfIsAdminRxBbCreditExtendedCapable Indicates whether extended buffer-to-buffer credit
feature can be enabled on a given interface.
'true' : capable of changing the extended buffer-to-buffer
credits on… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.289.1.1.7.1.22 |
| fcIfCapRxBbCreditMax deprecated The maximum number of receive buffers the port
hardware is capable of receiving
from the attached Nx_Port. This object is
applicable to ports operating in Fx mode. | column | buffers FcBbCredit | .1.3.6.1.4.1.9.9.289.1.1.7.1.3 |
| fcIfCapRxBbCreditMin deprecated The minimum number of receive buffers the port
hardware is capable of receiving from
the attached Nx_Port. This object is applicable
to ports operating in Fx mode. | column | buffers FcBbCredit | .1.3.6.1.4.1.9.9.289.1.1.7.1.4 |
| fcIfCapRxDataFieldSizeMax The maximum size in bytes of the Data Field in a frame
that the FC-Port is capable of receiving from its
attached FC-port. | column | FcRxDataFieldSize | .1.3.6.1.4.1.9.9.289.1.1.7.1.5 |
| fcIfCapRxDataFieldSizeMin The minimum size in bytes of the Data Field in a frame
that the FC-Port is capable of receiving from its
attached FC-port. | column | FcRxDataFieldSize | .1.3.6.1.4.1.9.9.289.1.1.7.1.6 |
| fcIfCapCos The Bit mask indicating the set of Classes of Service
that the FC-Port is capable of supporting. | column | CISCO-ST-TCFcClassOfServices | .1.3.6.1.4.1.9.9.289.1.1.7.1.7 |
| fcIfCapClass2SeqDeliv The flag indicating whether or not the FC-Port is
capable of supporting Class 2 Sequential Delivery. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.289.1.1.7.1.8 |
| fcIfCapClass3SeqDeliv The flag indicating whether or not the FC-Port is
capable of supporting Class 3 Sequential Delivery. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.289.1.1.7.1.9 |