fcIfActiveVsanUpList2k
CISCO-FC-FE-MIB ·
.1.3.6.1.4.1.9.9.289.1.1.2.1.29
Object
column
CISCO-ZS-MIBFcList
The list of VSANs (in the range 0 through 2047) whose operational state is 'up', that this port is associated with. Only ports operating in trunk mode can be associated to multiple VSANs. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 0 through 7, the second octet specifying VSANs 8 through 15, etc. Within each octet, the most significant bit represents the lowest numbered VSAN, and the least significant bit represents the highest numbered VSAN. Thus, each VSAN, whose operational state is 'up', that this port is associated with, is represented by a single bit within the value of this object. The corresponding VSAN that this port is a member of is operationally 'up' if and only if that bit has a value of '1'. Note that the zero-length string represents that none of the VSANs that this port is a member of are operationally 'up'. VSAN 0 is reserved. This object is applicable to only ports operating in trunk mode.
Context
- MIB
- CISCO-FC-FE-MIB
- OID
.1.3.6.1.4.1.9.9.289.1.1.2.1.29- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fcIfEntry
- Table
- fcIfTable
- Siblings
- 45
Syntax
CISCO-ZS-MIBFcList
- Source
- CISCO-ZS-MIBFcList
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..256
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fcIfWwn The World-Wide Name of this FC-Port. It's a 64-bit
identifier and is unique worldwide. | column | CISCO-ST-TCFcNameId | .1.3.6.1.4.1.9.9.289.1.1.2.1.1 |
| fcIfOperTrunkMode The current trunking mode of the port. | column | Enumeration | .1.3.6.1.4.1.9.9.289.1.1.2.1.10 |
| fcIfAllowedVsanList2k The list of VSANs (in the range 0 through 2047)
which are allowed to be received/transmitted on the
port when the port is operating in trunking mode.
Only ports operating in trunk… | column | CISCO-ZS-MIBFcList | .1.3.6.1.4.1.9.9.289.1.1.2.1.11 |
| fcIfAllowedVsanList4k The list of VSANs (in the range 2048 to 4096 )
which are allowed to be received/transmitted on the
port when the port is operating in trunking mode.
Only ports operating in trunk … | column | CISCO-ZS-MIBFcList | .1.3.6.1.4.1.9.9.289.1.1.2.1.12 |
| fcIfActiveVsanList2k The list of VSANs (in the range 0 through 2047)
this port is associated with. Only ports
operating in trunk mode can belong to multiple VSANs.
Each octet within the value of this … | column | CISCO-ZS-MIBFcList | .1.3.6.1.4.1.9.9.289.1.1.2.1.13 |
| fcIfActiveVsanList4k The list of VSANs (in the range 2048 through 4096)
this port is associated with. Only ports
operating in trunk mode can belong to multiple VSANs.
Each octet within the value of th… | column | CISCO-ZS-MIBFcList | .1.3.6.1.4.1.9.9.289.1.1.2.1.14 |
| fcIfBbCreditModel The BB_Credit model used by the FC-port.
The alternate BB_Credit management model can be used
in the arbitrated loop topology to manage the flow of
frames between the two ports p… | column | FcBbCreditModel | .1.3.6.1.4.1.9.9.289.1.1.2.1.15 |
| fcIfHoldTime The maximum time that the FC-Port shall hold a frame
in the transmitter buffer before discarding it, if it
is unable to deliver the frame.
The value 0 in this object means the fr… | column | microseconds CISCO-TCMicroSeconds | .1.3.6.1.4.1.9.9.289.1.1.2.1.16 |
| fcIfTransmitterType The technology of the port transceiver.
Since this is a characteristic of a physical port, this
object is not applicable for Port Channel ports, i.e.,
the value is instantiated bu… | column | CISCO-ST-TCFcPortTxTypes | .1.3.6.1.4.1.9.9.289.1.1.2.1.17 |
| fcIfConnectorType The module type of the port connector. This object
refers to the hardware implementation of the port.
It will be 'embedded' if the hardware equivalent to
Gigabit interface card ( … | column | CISCO-ST-TCFcPortModuleTypes | .1.3.6.1.4.1.9.9.289.1.1.2.1.18 |
| fcIfSerialNo The serial number of the connector unit ( e.g.,
for a GBIC ). If this is not applicable, return a
zero-length string.
Since this is a characteristic of a physical port, this
objec… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.289.1.1.2.1.19 |
| fcIfAdminMode The port mode configured by the user. If the user
configured the port as auto(1), then the port
initialization scheme determines the mode of the port.
In this case the user can l… | column | CISCO-ST-TCFcPortTypes | .1.3.6.1.4.1.9.9.289.1.1.2.1.2 |
| fcIfRevision The port revision of the connector unit (e.g., for a
GBIC). If this is not applicable it returns a
zero-length string.
Since this is a characteristic of a physical port, this
obje… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.289.1.1.2.1.20 |
| fcIfVendor The connector unit ( e.g., for a GBIC ) vendor.
If this is not applicable it returns a
zero-length string.
Since this is a characteristic of a physical port, this
object is not ap… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.289.1.1.2.1.21 |
| fcIfSFPSerialIDData The connector unit ( e.g., for a GBIC ) Serial ID
data.
If this is not applicable it returns a
zero-length string.
Since this is a characteristic of a physical port, this
object i… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.289.1.1.2.1.22 |
| fcIfPartNumber The connector unit ( e.g., for a GBIC ) part number.
If this is not applicable it returns a
zero-length string.
Since this is a characteristic of a physical port, this
object is n… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.289.1.1.2.1.23 |
| fcIfAdminRxBbCredit The receive buffer-to-buffer credits configured for
this port. If the value configured is zero, then
the value of the object fcIfCapOsmRxBbCreditDefault or
fcIfCapFrmRxBbCreditDe… | column | buffers FcBbCredit | .1.3.6.1.4.1.9.9.289.1.1.2.1.24 |
| fcIfAdminRxBbCreditModeISL The receive buffer-to-buffer credits configured for
this port to be used if it is operating in
xE_port mode.
NOTE: The value of this object is not used if
cfcFeat… | column | buffers FcBbCredit | .1.3.6.1.4.1.9.9.289.1.1.2.1.25 |
| fcIfAdminRxBbCreditModeFx The receive buffer-to-buffer credits configured for
this port to be used if it is operating in
Fx mode.
NOTE: The value of this object is not used if
cfcFeatureCt… | column | buffers FcBbCredit | .1.3.6.1.4.1.9.9.289.1.1.2.1.26 |
| fcIfOperRxBbCredit The receive buffer-to-buffer credits configured for
the operational port mode. | column | buffers FcBbCredit | .1.3.6.1.4.1.9.9.289.1.1.2.1.27 |
| fcIfRxDataFieldSize The largest Data_Field size for an FT_1 frame that
can be received by this port. | column | bytes FcRxDataFieldSize | .1.3.6.1.4.1.9.9.289.1.1.2.1.28 |
| fcIfOperMode The current operating mode of the port.
This object will also be an additional varbind sent
in the linkUp notification ( defined in IF-MIB ) in
addition to the varbinds defined fo… | column | CISCO-ST-TCFcPortTypes | .1.3.6.1.4.1.9.9.289.1.1.2.1.3 |
| fcIfActiveVsanUpList4k The list of VSANs (in the range 2048 to 4096 ) whose
operational state is 'up', that this port is
associated with. Only ports operating in trunk mode
can be associated to multipl… | column | CISCO-ZS-MIBFcList | .1.3.6.1.4.1.9.9.289.1.1.2.1.30 |
| fcIfPortRateMode The rate of data traffic supported by this port.
'dedicated' - this interface is operating in
dedicated rate mode. In dedicated rate
… | column | Enumeration | .1.3.6.1.4.1.9.9.289.1.1.2.1.31 |
| fcIfAdminRxPerfBuffer The performance buffers configured for this port. These
buffers in addition to the buffer-to-buffer credits are
used to improve the performance of a port, hence called
'Performan… | column | buffers FcPerfBuffer | .1.3.6.1.4.1.9.9.289.1.1.2.1.32 |
| fcIfOperRxPerfBuffer The performance buffers presently operational on this
port. | column | buffers FcPerfBuffer | .1.3.6.1.4.1.9.9.289.1.1.2.1.33 |
| fcIfBbScn The buffer-to-buffer state change number operational on
this interface. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.289.1.1.2.1.34 |
| fcIfPortInitStatus If 'true', this port successfully completed a
link initialization or there was an error during link
initialization.
If 'false', this port did not perform successful link
initializ… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.289.1.1.2.1.35 |
| fcIfAdminRxBbCreditExtended This object specifies the extended BB credits
that can be configured on an FC port (in the
range 256 through 4095). The acceptable value
depends on the BB credit configuration… | column | buffers FcBbCredit | .1.3.6.1.4.1.9.9.289.1.1.2.1.36 |
| fcIfFcTunnelIfIndex This object specifies the ifIndex of a FC tunnel
that represents a logical Fibre Channel data path
between a source switch and destination switch.
RSPAN uses a special FC tunnel t… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.9.9.289.1.1.2.1.37 |
| fcIfServiceState The service state of the interface. Some but not all
interfaces, e.g., those on hardware modules with a
capability of supporting shared resources, can have
their state changed t… | column | CISCO-ST-TCFcIfServiceStateType | .1.3.6.1.4.1.9.9.289.1.1.2.1.38 |
| fcIfAdminBbScnMode The Buffer-to-buffer State Change Number (BB_SC_N)
field (word 1, bits 15-12) specifies the
Buffer-to-buffer State Change Number. It indicates
that the sender of the PLOGI or FL… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.289.1.1.2.1.39 |
| fcIfAdminSpeed The port speed configured by the user.
If this interface is a member of a port channel port
then this object cannot be modified.
Since this is a characteristic of a physical port… | column | CISCO-ST-TCFcIfSpeed | .1.3.6.1.4.1.9.9.289.1.1.2.1.4 |
| fcIfPortType Indicates whether this interface is internal orexternal
interface on the chassis.
internal(1) - This type of interface is not accessible via an
externally-mounted connector on… | column | Enumeration | .1.3.6.1.4.1.9.9.289.1.1.2.1.40 |
| fcIfAdminFECState The port FEC state configured by the user.
When set to up(1), the port negotiates and
converts the link into operational FEC up
only if the neighboring port fcIfAdminFECState
is u… | column | Enumeration | .1.3.6.1.4.1.9.9.289.1.1.2.1.41 |
| fcIfOperFECState The current operating FEC state of the port.The
value is down(2) by default. If fcIfAdminFECState
is up(1) for a physical port, the port negotiates
and converts the link into oper… | column | Enumeration | .1.3.6.1.4.1.9.9.289.1.1.2.1.42 |
| fcIfAdminFecTtsState The port FEC (Forward Error Correction) TTS
(Transmitter Training Signal) state configured by
the user. When set to up, it enables TTS allowing
negotiation of FEC capability onl… | column | Enumeration | .1.3.6.1.4.1.9.9.289.1.1.2.1.43 |
| fcIfOperFecTtsState The current operating FEC TTS state of the port. The
value is down by default. For fcIfOperFecTtsState to
come up, both fcIfAdminFECState and fcIfAdminFecTtsState
should be config… | column | Enumeration | .1.3.6.1.4.1.9.9.289.1.1.2.1.44 |
| fcIfTransceiverPower The current transceiver power status for the interface. | column | Enumeration | .1.3.6.1.4.1.9.9.289.1.1.2.1.45 |
| fcIfTransceiverPowerControl The transceiver power control setting for the interface. | column | Enumeration | .1.3.6.1.4.1.9.9.289.1.1.2.1.46 |
| fcIfBeaconMode The Beacon mode configured by the user.
If 'true', the Beacon mode is enabled.
If 'false', the beacon mode is disabled.
In Beacon mode, an interface LED is put into flashing
mode… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.289.1.1.2.1.5 |
| fcIfPortChannelIfIndex The ifIndex of the port channel port this port belongs
to.
A value of zero indicates that this port is not part
of any port channel.
For port channel port this object will have th… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.9.9.289.1.1.2.1.6 |
| fcIfOperStatusCause The cause of current operational state of the
port.
The current operational state of the port is shown by
the 'ifOperStatus' defined in IF-MIB. This object
will show 'none(2)' fo… | column | FcIfOperStatusReason | .1.3.6.1.4.1.9.9.289.1.1.2.1.7 |
| fcIfOperStatusCauseDescr The description for the cause of current operational
state of the port, shown by the object
'fcIfOperStatusCause'. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.289.1.1.2.1.8 |
| fcIfAdminTrunkMode The trunking mode configured by the user.
When set to 'nonTrunk(1)', the port negotiates and
converts the link into non-trunking mode. This port
and the neighboring port's fcIfOpe… | column | Enumeration | .1.3.6.1.4.1.9.9.289.1.1.2.1.9 |