ciscoExtScsiStartLunDisc
CISCO-EXT-SCSI-MIB ·
.1.3.6.1.4.1.9.9.299.1.1.3
Object
scalar
r/w
Enumeration
If this object is set to 'startLocalDiscovery',
then only the directly attached SCSI target
devices/ports and/or LUNs associated with them
on all VSANs will be discovered.
If this object is set to 'startRemoteDiscovery',
then all SCSI target devices/ports and/or LUNs
associated with them on all VSANs in the whole
fabric, except the directly attached ones, will
be discovered.
If this object is set to 'startDiscovery', then
both the above discoveries will be carried out.
If this object is set to 'startPartialDiscovery',
then all SCSI target devices/ports and/or LUNs
associated with them on the domain IDs and VSANs
specified in the ciscoExtScsiPartialLunDiscTable,
will be discovered. If the
ciscoExtScsiPartialLunDiscTable is empty, then
no SCSI target devices/ports will be discovered.
If this object is set to 'startPortBasedDiscovery',
then all LUNs/targets associated with the port
specified by ciscoExtScsiLunDiscPortId object will
be discovered. If the ciscoExtScsiLunDiscPortId
object is not set to a valid value, then no
LUNs/targets will be discovered. The value of
ciscoExtScsiLunDiscVsanId object should be set to
the value of the VSAN on which the port based
discovery is to be carried out.
No action is taken if this object is set
to 'noop'.
The value of this object when read is
always 'noop'.
After a discovery has been triggered, this
object cannot be set again to trigger
another discovery, when the value of
ciscoExtScsiLunDiscStatus is 'inProgress'.
In all the above cases, if the
ciscoExtScsiLunDiscOs object is set to a
particular Operating System, then the discovery
of the LUNs will take place only for that
Operating System.
Context
- MIB
- CISCO-EXT-SCSI-MIB
- OID
.1.3.6.1.4.1.9.9.299.1.1.3- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- ciscoExtScsiConfiguration
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | startDiscovery |
2 | startLocalDiscovery |
3 | startRemoteDiscovery |
4 | noop |
5 | startPartialDiscovery |
6 | startPortBasedDiscovery |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ciscoExtScsiGenInstanceTable This table is an extension to the
ciscoScsiInstanceTable defined in
the CISCO-SCSI-MIB.
The ciscoScsiInstIndex values are
assigned as follows:
1. there is … | table | - | .1.3.6.1.4.1.9.9.299.1.1.1 |
| ciscoExtScsiLunDiscOs This object specifies the Operating System on
which the LUNs/targets need to be discovered. | scalar | LunDiscOS | .1.3.6.1.4.1.9.9.299.1.1.10 |
| ciscoExtScsiLunDiscVsanId This object specifies the VSAN on which the LUNs/
targets need to be discovered, in the case of
port-based discovery. If a port-based discovery is
not being initiated, then the … | scalar | CISCO-ST-TCVsanIndex | .1.3.6.1.4.1.9.9.299.1.1.11 |
| ciscoExtScsiLunDiscPortId This object specifies the FCID of the port for
which the LUNs/targets need to be discovered, in
the case of port-based discovery. If a port-based
discovery is not being initiated… | scalar | CISCO-ST-TCFcAddressId | .1.3.6.1.4.1.9.9.299.1.1.12 |
| ciscoExtScsiLunCacheScsiIndex This object specifies the first index into the
ciscoExtScsiIntrDiscLunsTable. It is populated
by the agent on the completion of a successful
port based discovery of LUNs. It helps… | scalar | CISCO-SCSI-MIBScsiIndexValue | .1.3.6.1.4.1.9.9.299.1.1.13 |
| ciscoExtScsiLunCacheDevIndex This object specifies the second index into the
ciscoExtScsiIntrDiscLunsTable. It is populated
by the agent on the completion of a successful
port based discovery of LUNs. It help… | scalar | CISCO-SCSI-MIBScsiIndexValue | .1.3.6.1.4.1.9.9.299.1.1.14 |
| ciscoExtScsiLunCachePortIndex This object specifies the third index into the
ciscoExtScsiIntrDiscLunsTable. It is populated
by the agent on the completion of a successful
port based discovery of LUNs. It helps… | scalar | CISCO-SCSI-MIBScsiIndexValue | .1.3.6.1.4.1.9.9.299.1.1.15 |
| ciscoExtScsiLunCacheTgtIndex This object specifies the fourth index into the
ciscoExtScsiIntrDiscLunsTable. It is populated
by the agent on the completion of a successful
port based discovery of LUNs. It help… | scalar | CISCO-SCSI-MIBScsiIndexValue | .1.3.6.1.4.1.9.9.299.1.1.16 |
| ciscoExtScsiDiscType This object specifies the type of discovery
desired.
Setting this object to 'targets(1), results in
only targets being discovered and the
ciscoExtScsiIntrDiscTgtTable … | scalar | Enumeration | .1.3.6.1.4.1.9.9.299.1.1.17 |
| ciscoExtScsiLunDiscSpinLock This object is used to facilitate triggerring
the LUN/target discovery by multiple managers.
The procedure for triggering LUN/target discovery
is as follows:
… | scalar | SNMPv2-TCTestAndIncr | .1.3.6.1.4.1.9.9.299.1.1.2 |
| ciscoExtScsiLunDiscStatus This object indicates the outcome of the
LUN/target discovery on the local switch.
This object contains the status of the most
recent discovery.
inProgress(1… | scalar | Enumeration | .1.3.6.1.4.1.9.9.299.1.1.4 |
| ciscoExtScsiLunDiscCompleteTime This object contains the value of sysUpTime
when the last discovery was completed.
The value of this object will be zero, if
discovery has not been performed since the
last system… | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.299.1.1.5 |
| ciscoExtScsiIntrDiscTgtTable This table is an extension to the
ciscoScsiDscTgtTable. | table | - | .1.3.6.1.4.1.9.9.299.1.1.6 |
| ciscoExtScsiIntrDiscLunsTable This table is an extension to the
ciscoScsiDscLunTable. | table | - | .1.3.6.1.4.1.9.9.299.1.1.7 |
| ciscoExtScsiNotificationCntl This object specifies if the
'ciscoExtScsiLunDiscDoneNotify' notification
should be generated or not.
If the value of this object is 'true', then
the notification is g… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.299.1.1.8 |
| ciscoExtScsiPartialLunDiscTable This table contains a set of domain IDs on VSAN, on
which the fabric-wide LUN/target discovery needs to
be carried out. It is a mechanism to limit the fabric
wide discovery of SC… | table | - | .1.3.6.1.4.1.9.9.299.1.1.9 |