cErrDisableFeatureConfigurable

CISCO-ERR-DISABLE-MIB · .1.3.6.1.4.1.9.9.548.1.2.1.1.2

Object

column Bits

This object indicates whether the error-disable related
configuration is configurable for this feature. If a bit
is set to 1, then the corresponding error-disable
configuration can be configured.
              
'detectionEnable'    - indicates the error-disable detection
                       can be enabled/disabled for this feature
                       via cErrDisableFeatureDetectEnable.
'recoveryEnable'     - indicates the error-disable recovery
                       can be enabled/disabled for this feature
                       via cErrDisableFeatureRecoveryEnable.
'recoveryInterval'   - indicates the error-disable recovery
                       Interval can be configured via
                       cErrDisableFeatureRecoveryInterval.
'detectShutdownVlan' - indicates the error-disable detection
                       shutdown vlan mode can be configured for
                       this feature via 
                       cErrDisableFeatureDetectShutdownVlan. 
'flapControl'        - indicates the error-disable flap control
                       can be configured via 
                       cErrDisableFeatureMaxFlapCount and
                       cErrDisableFeatureFlapTimePeriod.

Context

MIB: CISCO-ERR-DISABLE-MIB
OID: .1.3.6.1.4.1.9.9.548.1.2.1.1.2
Type: column
Access: readonly
Status: current
Parent: cErrDisableFeatureEntry
Table: cErrDisableFeatureTable
Siblings: 7

Syntax

Bits

Values & Constraints

Enumerated Values

`0`	detectionEnable
`1`	recoveryEnable
`2`	recoveryInterval
`3`	detectShutdownVlan
`4`	flapControl

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cErrDisableFeatureIndex This object uniquely identifies a feature that makes use of the error-disable feature.	column	CErrDisableFeatureID	`.1.3.6.1.4.1.9.9.548.1.2.1.1.1`
cErrDisableFeatureDetectEnable This object specifies whether the error-disable detection is enabled for the feature. Note: This object is read-write only for those features that are configu…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.548.1.2.1.1.3`
cErrDisableFeatureRecoveryEnable This object specifies whether the system can automatically recover a system entity that has been disabled by the feature.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.548.1.2.1.1.4`
cErrDisableFeatureRecoveryInterval This object specifies the error-recovery time interval that will be used by the system for any system entity that is error-disabled by this particular feature. If t…	column	CISCO-TCTimeIntervalSec	`.1.3.6.1.4.1.9.9.548.1.2.1.1.5`
cErrDisableFeatureDetectShutdownVlan This object specifies whether shutting down the violating VLAN on an interface is enabled or not. The value of 'true' indicates that shutting down the violating VLAN on an interf…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.548.1.2.1.1.6`
cErrDisableFeatureMaxFlapCount This object specifies the maximum number of flaps that are allowed to occur before setting to error disable state. A read-only value of zero indicates that no flap control is pres…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.548.1.2.1.1.7`
cErrDisableFeatureFlapTimePeriod This object specifies the period of time counting the number of flaps that are allowed before setting to error disable state. A read-only value of zero indicates that no flap cont…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.548.1.2.1.1.8`