ceipSecTunSaIfIndex

CISCO-ENHANCED-IPSEC-FLOW-MIB · .1.3.6.1.4.1.9.9.432.1.1.5.1.5
MIB view Table view

Object

column IF-MIBInterfaceIndex 
This object represents the ifIndex of an interface
where a tunnel with ceipSecTunIndex is created.
Multiple IPsec tunnels can be created using the same
interface.

Context

MIB
CISCO-ENHANCED-IPSEC-FLOW-MIB
OID
.1.3.6.1.4.1.9.9.432.1.1.5.1.5
Type
column
Access
readonly
Status
current
Parent
ceipSecTunnelSaEntry
Table
ceipSecTunnelSaTable
Siblings
26

Syntax

IF-MIBInterfaceIndex
Source
IF-MIBInterfaceIndex
Base type
Integer32

Values & Constraints

Type Constraints
range: 1..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ceipSecTunSaProtocol
This column represents the security protocol (AH, ESP or IPComp) for which this security association was setup.
columnCISCO-IPSEC-TCCIPsecProtocol.1.3.6.1.4.1.9.9.432.1.1.5.1.1
ceipSecTunSaInReplayDropPkts
The total number of packets dropped during receive processing due to Anti-Replay processing by using this SA.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.10
ceipSecTunSaInAuths
The total number of inbound authentication's performed by using this SA.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.11
ceipSecTunSaInAuthFails
The total number of inbound authentication's which ended in failure by using this SA.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.12
ceipSecTunSaInDecrypts
The total number of inbound decryption's performed by this SA.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.13
ceipSecTunSaInDecryptFails
The total number of inbound decryption's which ended in failure by using this SA.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.14
ceipSecTunSaOutOctets
A high capacity count of the total number of octets sent by using this SA. This value is accumulated AFTER determining whether or not the packet should be compressed.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.15
ceipSecTunSaOutUncompOctets
A high capacity count of the total number of uncompressed octets sent by using this SA. This value is accumulated BEFORE the packet is compressed. If compression is not being used…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.16
ceipSecTunSaOutPkts
The total number of packets sent by using this SA.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.17
ceipSecTunSaOutDropPkts
The total number of packets dropped during send processing by using this SA.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.18
ceipSecTunSaOutAuths
The total number of outbound authentication's performed by using this SA.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.19
ceipSecTunSaIndex
The object, in the context of the IPsec tunnel 'ceipSecTunIndex', is an index of security associations comprising the Phase-2 IPsec tunnel represented by the tunnel index 'ceipS…
columnUnsigned32.1.3.6.1.4.1.9.9.432.1.1.5.1.2
ceipSecTunSaOutAuthFails
The total number of outbound authentication's which ended in failure by using this SA.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.20
ceipSecTunSaOutEncrypts
The total number of outbound encryption's performed by using this SA.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.21
ceipSecTunSaOutEncryptFails
The total number of outbound encryption's which ended in failure by using this SA.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.22
ceipSecTunSaOutCompressedPkts
The total number of outbound packets which were successfully compressed by using this SA.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.23
ceipSecTunSaOutCompSkippedPkts
The total number of outbound packets that were to be compressed but which were skipped due to the compression hysteresis when using this SA.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.24
ceipSecTunSaOutCompFailPkts
The total number of outbound packets that failed compression because they grew in size after compression when using this SA.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.25
ceipSecTunSaOutCompTooSmallPkts
The total number of outbound packets that were to be compressed but were smaller than the compression threshold size when using this SA.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.26
ceipSecTunSaStatus
This column represents the status of the security association represented by this conceptual row. If the status of the SA is 'active', the SA is ready for active use. The status '…
columnEnumeration.1.3.6.1.4.1.9.9.432.1.1.5.1.27
ceipSecTunSaDirection
Phase-2 IPsec security associations are simplex. Hence a particular security association is used either for securing outgoing traffic or decoding incoming traffic. This column id…
columnCISCO-IPSEC-TCCIPsecPhase2SaDirection.1.3.6.1.4.1.9.9.432.1.1.5.1.3
ceipSecTunSaValue
This is the value of the Security Protection Index (SPI) assigned by the system to the security association represented by this entry.
columnCISCO-IPSEC-TCCIPsecSpi.1.3.6.1.4.1.9.9.432.1.1.5.1.4
ceipSecTunSaInOctets
A high capacity count of the total number of octets received by using this SA. This value is accumulated BEFORE determining whether or not the packet should be decompressed.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.6
ceipSecTunSaInDecompOctets
A high capacity count of the total number of decompressed octets received by using this SA. This value is accumulated AFTER the packet is decompressed. If compression is not bein…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.7
ceipSecTunSaInPkts
The total number of packets received by using this SA.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.8
ceipSecTunSaInDropPkts
The total number of packets dropped during receive process by using this SA. This count does NOT include packets dropped due to Anti-Replay processing.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.432.1.1.5.1.9