ceipSecTunPmtu
CISCO-ENHANCED-IPSEC-FLOW-MIB ·
.1.3.6.1.4.1.9.9.432.1.1.2.1.31
Object
The Path MTU for this IPsec Phase-2 tunnel, which has been either learnt from the network or which has been specified by the administrator. The lower end of the range is 68 which is the minimum MTU for IPv4.
Context
- MIB
- CISCO-ENHANCED-IPSEC-FLOW-MIB
- OID
.1.3.6.1.4.1.9.9.432.1.1.2.1.31- Type
- column
- Access
- readonly
- Status
- current
- Units
- Octets
- Parent
- ceipSecTunnelEntry
- Table
- ceipSecTunnelTable
- Siblings
- 53
Syntax
Octets CISCO-IPSEC-TCCIPsecPmtu
- Source
- CISCO-IPSEC-TCCIPsecPmtu
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 68..1500
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ceipSecTunIndex The index of the IPsec Phase-2 Tunnel Table.
The value of the index is a number which begins
at 1 and is incremented with each tunnel that is
created. The value of this object wil… | column | CISCO-IPSEC-TCCIPsecPhase2TunnelIndex | .1.3.6.1.4.1.9.9.432.1.1.2.1.1 |
| ceipSecTunNATTraversalMode The encapsulation used by the IPsec Phase-2
tunnel for NAT traversal.
The value of this object is constrained based on
the value of the column 'ceipSecTunEncapMode'… | column | CISCO-IPSEC-TCCIPsecNATTraversalMode | .1.3.6.1.4.1.9.9.432.1.1.2.1.10 |
| ceipSecTunLifeSize The negotiated LifeSize of the
IPsec Phase-2 Tunnel in kilobytes. | column | KBytes Unsigned32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.11 |
| ceipSecTunLifeTime The negotiated LifeTime of the IPsec Phase-2
Tunnel in seconds.
If the tunnel was setup manually, the value of this
MIB element should be 0. | column | Seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.12 |
| ceipSecTunActiveTime The length of time the IPsec Phase-2
Tunnel has been active in hundredths of seconds. | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.9.9.432.1.1.2.1.13 |
| ceipSecTunSaLifeSizeThreshold The security association LifeSize refresh
threshold in kilobytes.
If the tunnel was setup manually, the value of this
MIB element should be 0. | column | KBytes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.14 |
| ceipSecTunSaLifeTimeThreshold The security association LifeTime refresh
threshold in seconds.
If the tunnel was setup manually, the value of this
MIB element should be 0. | column | Seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.15 |
| ceipSecTunTotalRefreshes The total number of security
association refreshes performed. | column | QM Exchanges SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.16 |
| ceipSecTunExpiredSaInstances The total number of security associations
which have expired.
If the tunnel was setup manually, the value of this
MIB element should be 0. | column | SAs SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.17 |
| ceipSecTunCurrentSaInstances The number of security associations
which are currently active or expiring. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.18 |
| ceipSecTunInSaDHGrp The Diffie Hellman Group used
by the inbound security association of the
IPsec Phase-2 Tunnel.
If the tunnel was setup manually, the value of this
MIB element would… | column | CISCO-IPSEC-TCCIPsecDiffHellmanGrp | .1.3.6.1.4.1.9.9.432.1.1.2.1.19 |
| ceipSecTunLocalAddressType The type of the IP address of the local endpoint
for the IPsec Phase-2 Tunnel. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.432.1.1.2.1.2 |
| ceipSecTunInSaEncryptAlgo The encryption algorithm used by the inbound security
association of the IPsec Phase-2 Tunnel. | column | CISCO-IPSEC-TCCIPsecEncryptAlgorithm | .1.3.6.1.4.1.9.9.432.1.1.2.1.20 |
| ceipSecTunInSaEncryptKeySize The key size in bits of the negotiated key to be
used with the algorithm denoted by
'ceipSecTunInSaEncryptAlgo'.
For DES and 3DES the key size is respectively 56 a… | column | Bits CISCO-IPSEC-TCCIPsecEncryptionKeySize | .1.3.6.1.4.1.9.9.432.1.1.2.1.21 |
| ceipSecTunInSaAhAuthAlgo The authentication algorithm used by the inbound
authentication header (AH) security association of
the IPsec Phase-2 Tunnel. | column | CISCO-IPSEC-TCCIPsecAuthAlgorithm | .1.3.6.1.4.1.9.9.432.1.1.2.1.22 |
| ceipSecTunInSaEspAuthAlgo The authentication algorithm used by the inbound
ecapsulation security protocol (ESP) security
association of the IPsec Phase-2 Tunnel. | column | CISCO-IPSEC-TCCIPsecAuthAlgorithm | .1.3.6.1.4.1.9.9.432.1.1.2.1.23 |
| ceipSecTunInSaDecompAlgo The decompression algorithm used by the inbound
security association of the IPsec Phase-2 Tunnel. | column | CISCO-IPSEC-TCCIPsecCompAlgorithm | .1.3.6.1.4.1.9.9.432.1.1.2.1.24 |
| ceipSecTunOutSaDHGrp The Diffie Hellman Group used by the outbound security
association of the IPsec Phase-2 Tunnel.
If the tunnel was setup manually, the value of this
MIB element woul… | column | CISCO-IPSEC-TCCIPsecDiffHellmanGrp | .1.3.6.1.4.1.9.9.432.1.1.2.1.25 |
| ceipSecTunOutSaEncryptAlgo The encryption algorithm used by the outbound security
association of the IPsec Phase-2 Tunnel. | column | CISCO-IPSEC-TCCIPsecEncryptAlgorithm | .1.3.6.1.4.1.9.9.432.1.1.2.1.26 |
| ceipSecTunOutSaEncryptKeySize The key size in bits of the negotiated key to be
used with the algorithm denoted by
'ceipSecTunOutSaEncryptAlgo'.
For DES and 3DES the key size is respectively 56 … | column | Bits CISCO-IPSEC-TCCIPsecEncryptionKeySize | .1.3.6.1.4.1.9.9.432.1.1.2.1.27 |
| ceipSecTunOutSaAhAuthAlgo The authentication algorithm used by the outbound
authentication header (AH) security association of
the IPsec Phase-2 Tunnel. | column | CISCO-IPSEC-TCCIPsecAuthAlgorithm | .1.3.6.1.4.1.9.9.432.1.1.2.1.28 |
| ceipSecTunOutSaEspAuthAlgo The authentication algorithm used by the inbound
encapsulation security protocol (ESP)
security association of the IPsec Phase-2 Tunnel. | column | CISCO-IPSEC-TCCIPsecAuthAlgorithm | .1.3.6.1.4.1.9.9.432.1.1.2.1.29 |
| ceipSecTunLocalAddress The IP address of the local endpoint
for the IPsec Phase-2 Tunnel. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.432.1.1.2.1.3 |
| ceipSecTunOutSaCompAlgo The compression algorithm used by the inbound
security association of the IPsec Phase-2 Tunnel. | column | CISCO-IPSEC-TCCIPsecCompAlgorithm | .1.3.6.1.4.1.9.9.432.1.1.2.1.30 |
| ceipSecTunInOctets A high capacity count of the total number of octets
received by this IPsec Phase-2 Tunnel. This value is
accumulated BEFORE determining whether or not the packet
should be decomp… | column | Octets SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.9.432.1.1.2.1.32 |
| ceipSecTunInDecompOctets A high capacity count of the total number of decompressed
octets received by this IPsec Phase-2 Tunnel. This value
is accumulated AFTER the packet is decompressed. If
compression… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.9.432.1.1.2.1.33 |
| ceipSecTunInPkts The total number of packets received by this IPsec
Phase-2 Tunnel. | column | Packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.34 |
| ceipSecTunInDropPkts The total number of packets dropped
during receive processing by this IPsec Phase-2
Tunnel. This count does NOT include
packets dropped due to Anti-Replay processing. | column | Packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.35 |
| ceipSecTunInReplayDropPkts The total number of packets dropped during
receive processing due to Anti-Replay processing
by this IPsec Phase-2 Tunnel. | column | Packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.36 |
| ceipSecTunInAuths The total number of inbound
authentication's performed by this
IPsec Phase-2 Tunnel. | column | Events SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.37 |
| ceipSecTunInAuthFails The total number of inbound authentication's
which ended in failure by this IPsec Phase-2 Tunnel . | column | Failures SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.38 |
| ceipSecTunInDecrypts The total number of inbound decryption's performed
by this IPsec Phase-2 Tunnel. | column | Packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.39 |
| ceipSecTunRemoteAddressType The type of the IP address of the remote
endpoint for the IPsec Phase-2 Tunnel. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.432.1.1.2.1.4 |
| ceipSecTunInDecryptFails The total number of inbound decryption's
which ended in failure by this IPsec Phase-2 Tunnel. | column | Failures SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.40 |
| ceipSecTunOutOctets A high capacity count of the total number of octets
sent by this IPsec Phase-2 Tunnel. This value is
accumulated AFTER determining whether or not the
packet should be compressed. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.9.432.1.1.2.1.41 |
| ceipSecTunOutUncompOctets A high capacity count of the total number
of uncompressed octets sent by this IPsec
Phase-2 Tunnel. This value is accumulated BEFORE
the packet is compressed. If compression
is n… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.9.432.1.1.2.1.42 |
| ceipSecTunOutPkts The total number of packets sent by this
IPsec Phase-2 Tunnel. | column | Packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.43 |
| ceipSecTunOutDropPkts The total number of packets dropped during
send processing by this IPsec Phase-2 Tunnel. | column | Packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.44 |
| ceipSecTunOutAuths The total number of outbound authentication's performed
by this IPsec Phase-2 Tunnel. | column | Events SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.45 |
| ceipSecTunOutAuthFails The total number of outbound
authentication's which ended in failure
by this IPsec Phase-2 Tunnel. | column | Failures SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.46 |
| ceipSecTunOutEncrypts The total number of outbound encryption's performed
by this IPsec Phase-2 Tunnel. | column | Packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.47 |
| ceipSecTunOutEncryptFails The total number of outbound encryption's
which ended in failure by this IPsec Phase-2 Tunnel. | column | Failures SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.48 |
| ceipSecTunOutCompressedPkts The total number of outbound packets
which were successfully compressed. | column | Packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.49 |
| ceipSecTunRemoteAddress The IP address of the remote endpoint for
the IPsec Phase-2 Tunnel. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.432.1.1.2.1.5 |
| ceipSecTunOutCompSkippedPkts The total number of outbound packets that were to be
compressed but which were skipped due to the compression
hysteresis. | column | Packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.50 |
| ceipSecTunOutCompFailPkts The total number of outbound packets that failed
compression because they grew in size after compression. | column | Packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.51 |
| ceipSecTunOutCompTooSmallPkts The total number of outbound packets that were to be
compressed but were smaller than the compression threshold
size. | column | Packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.432.1.1.2.1.52 |
| ceipSecIfIndex This object represents the ifIndex of an interface
where this tunnel is created.
Multiple IPsec tunnels can be created using the same
interface. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.432.1.1.2.1.53 |
| ceipSecTunStatus The status of the MIB table row.
This object can be used to bring the tunnel down
or force a rekeying.
When the value is set to destroy(5), the SA
bundle is destroy… | column | CISCO-IPSEC-TCCIPsecTunnelStatus | .1.3.6.1.4.1.9.9.432.1.1.2.1.54 |
| ceipSecTunControlProtocol Identifies the protocol used to setup and
administer this Phase-2 IPsec tunnel.
In case this tunnel was spawned by an IPsec
signaling protocol, this MIB object co… | column | CISCO-IPSEC-TCCIPsecControlProtocol | .1.3.6.1.4.1.9.9.432.1.1.2.1.6 |
| ceipSecTunControlTunnelIndex The index of the associated IPsec Phase-1
Tunnel. In case this tunnel was spawned by an
IPsec signaling protocol, this MIB object
contains the value of the object 'cisgIpsSgTunInd… | column | CISCO-IPSEC-TCCIPsecPhase1TunnelIndexOrZero | .1.3.6.1.4.1.9.9.432.1.1.2.1.7 |
| ceipSecTunControlTunnelAlive An indicator which specifies whether or not the
IPsec Phase-1 Tunnel that spawned this Phase-2
tunnel currently exists. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.432.1.1.2.1.8 |
| ceipSecTunEncapMode The encapsulation mode used by the
IPsec Phase-2 Tunnel. | column | CISCO-IPSEC-TCCIPsecEncapMode | .1.3.6.1.4.1.9.9.432.1.1.2.1.9 |