cdpvmNextAvailIndex
CISCO-DYNAMIC-PORT-VSAN-MIB ·
.1.3.6.1.4.1.9.9.421.1.1.1
Object
scalar
Unsigned32
This object contains an appropriate value to be used for cdpvmIndex when creating entries in the cdpvmTable. The value 0 indicates that all entries are assigned. A management application should read this object, get the (non-zero) value and use same for creating an entry in the cdpvmTable. After each retrieval and use, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse. A suggested mechanism is to make an index available when the corresponding entry is deleted.
Context
- MIB
- CISCO-DYNAMIC-PORT-VSAN-MIB
- OID
.1.3.6.1.4.1.9.9.421.1.1.1- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- cdpvmConfiguration
- Siblings
- 12
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-16384
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cdpvmDiffTable This table contains the result of the compare
operation configured by means of the
cdpvmDiffConfig object. | table | - | .1.3.6.1.4.1.9.9.421.1.1.10 |
| cdpvmClearAutoLearn This object assists in clearing the
auto-learnt entries.
Setting this object to 'clear(1)' will result
in all auto-learnt entries being cleared.
Setting this… | scalar | Enumeration | .1.3.6.1.4.1.9.9.421.1.1.11 |
| cdpvmClearAutoLearnWwn Represents the port WWN (pWWN) to be used for
clearing its corresponding auto-learnt entry. | scalar | CISCO-ST-TCFcNameIdOrZero | .1.3.6.1.4.1.9.9.421.1.1.12 |
| cdpvmActivationState This object indicates the state of activation.
If the value of this object is 'true', then
an activation has been attempted as the most
recent operation.
If … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.421.1.1.13 |
| cdpvmTable This table contains the set of all valid
bindings of devices to VSANs configured on
the local device. A valid binding consists
of a pWWN/nWWN bound to a VSAN. If a device
is bound… | table | - | .1.3.6.1.4.1.9.9.421.1.1.2 |
| cdpvmActivate This object helps in activating the set
of bindings in the cdpvmTable.
Setting this object to 'activate(1)' will
result in the valid bindings present in
cdpvmTable bein… | scalar | CISCO-PSM-MIBCpsmDbActivate | .1.3.6.1.4.1.9.9.421.1.1.3 |
| cdpvmActivateResult This object indicates the outcome of the
activation. | scalar | CISCO-PSM-MIBCpsmActivateResult | .1.3.6.1.4.1.9.9.421.1.1.4 |
| cdpvmAutoLearn This object helps to 'learn' the configuration
of devices logged into the local device on all
its ports and the VSANs to which they are
associated. This information will be
popu… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.421.1.1.5 |
| cdpvmCopyEnfToConfig This object when set to 'copy(1)', results
in the active (enforced) binding database
to be copied on to the configuration
binding database. Note that
the learned entries are a… | scalar | Enumeration | .1.3.6.1.4.1.9.9.421.1.1.6 |
| cdpvmEnfTable This table contains information on all
currently enforced bindings on the local
device. The enforced set of bindings is the
set of valid bindings copied from the
configuration b… | table | - | .1.3.6.1.4.1.9.9.421.1.1.7 |
| cdpvmDynPortsTable This table contains the set of all ports
that are operating with a dynamic VSAN on
the local device. | table | - | .1.3.6.1.4.1.9.9.421.1.1.8 |
| cdpvmDiffConfig The config database represented by cdpvmTable
and the enforced database represented by
cdpvmEnfTable can be compared to list out the
differences.
This object specifies… | scalar | CISCO-PSM-MIBCpsmDiffDb | .1.3.6.1.4.1.9.9.421.1.1.9 |