dspuPuOperStartTime
CISCO-DSPU-MIB ·
.1.3.6.1.4.1.9.9.24.1.4.2.1.20
Object
column
SNMPv2-TCTimeStamp
Timestamp of PU activation (when ACTPU +rsp received).
Context
- MIB
- CISCO-DSPU-MIB
- OID
.1.3.6.1.4.1.9.9.24.1.4.2.1.20- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dspuPuOperEntry
- Table
- dspuPuOperTable
- Siblings
- 21
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dspuPuOperIndex Index of the PU entry in dspuPuOperTable. | column | Integer32 | .1.3.6.1.4.1.9.9.24.1.4.2.1.1 |
| dspuPuOperMaxIframe Maximum size of an I-frame that can be transmitted/received
across the link between this dspuNode and the remote PU. | column | Integer32 | .1.3.6.1.4.1.9.9.24.1.4.2.1.10 |
| dspuPuOperLinkRetryCount Number of times that the DSPU node will attempt to activate
the link between the dspuNode and the remote PU. | column | Integer32 | .1.3.6.1.4.1.9.9.24.1.4.2.1.11 |
| dspuPuOperLinkRetryTimeout Value (in seconds) for the delay between link activation
attempts between the dspuNode and the remote PU. | column | Integer32 | .1.3.6.1.4.1.9.9.24.1.4.2.1.12 |
| dspuPuOperStartPu Attempt link activation with the remote PU.
TRUE -> Attempt link activation with remote PU.
FALSE -> Do not attempt link activation with remote PU. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.24.1.4.2.1.13 |
| dspuPuOperDlcType DLC type used by the dspuNode for link activation
with the remote PU. | column | Enumeration | .1.3.6.1.4.1.9.9.24.1.4.2.1.14 |
| dspuPuOperDlcUnit DLC unit used by the dspuNode for link activation
with the remote PU. | column | Integer32 | .1.3.6.1.4.1.9.9.24.1.4.2.1.15 |
| dspuPuOperDlcPort DLC port used by the dspuNode for link activation
with the remote PU. | column | Integer32 | .1.3.6.1.4.1.9.9.24.1.4.2.1.16 |
| dspuPuOperFocalPoint PU serves as a focal point for alert forwarding.
TRUE -> PU serves as focal point
FALSE -> PU does not serve as focal point
Only an upstream PU may be defined as a… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.24.1.4.2.1.17 |
| dspuPuOperState Operational state of PU is either active or inactive. | column | Enumeration | .1.3.6.1.4.1.9.9.24.1.4.2.1.18 |
| dspuPuOperFsmState Current FSM state of the PU as follows:
linkReset
- Link is in reset state - not connected
linkPendConnOut
- Pending ConnectOut to establish link
linkPendConnIn
- Pending Co… | column | Enumeration | .1.3.6.1.4.1.9.9.24.1.4.2.1.19 |
| dspuPuOperName Name of the PU. | column | OctetString | .1.3.6.1.4.1.9.9.24.1.4.2.1.2 |
| dspuPuOperLastStateChgTime TimeStamp of last PU state change between active<->inactive. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.24.1.4.2.1.21 |
| dspuPuOperRemoteAddress Poll address, DLCI, or subscriber address
associated with the remote PU. | column | OctetString | .1.3.6.1.4.1.9.9.24.1.4.2.1.22 |
| dspuPuOperType PU type is either upstream or downstream. | column | Enumeration | .1.3.6.1.4.1.9.9.24.1.4.2.1.3 |
| dspuPuOperRemoteMacAddress MAC address of the remote PU. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.24.1.4.2.1.4 |
| dspuPuOperRemoteSapAddress SAP address of the remote PU. | column | Integer32 | .1.3.6.1.4.1.9.9.24.1.4.2.1.5 |
| dspuPuOperLocalSapAddress SAP address of the local PU. | column | Integer32 | .1.3.6.1.4.1.9.9.24.1.4.2.1.6 |
| dspuPuOperXid Upstream PU : XID that was sent to the remote PU.
Dnstream PU : XID that was received from the remote PU. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.24.1.4.2.1.7 |
| dspuPuOperXidFmt Type of XID format used during activation of the link
between this dspuNode and the remote PU. | column | Enumeration | .1.3.6.1.4.1.9.9.24.1.4.2.1.8 |
| dspuPuOperWindowSize Send/Receive window size to be used across the link
between this dspuNode and the remote PU. | column | Integer32 | .1.3.6.1.4.1.9.9.24.1.4.2.1.9 |