dspuPuOperFsmState

CISCO-DSPU-MIB · .1.3.6.1.4.1.9.9.24.1.4.2.1.19

Object

column Enumeration

Current FSM state of the PU as follows:
linkReset
  - Link is in reset state - not connected
linkPendConnOut
  - Pending ConnectOut to establish link
linkPendConnIn
  - Pending ConnectIn to establish link
linkPendXid
  - Pending XID negotiation on the link
linkXidNeg
  - XID negotiation proceeding on link
linkConnOut
  - ConnectOut link activation
linkConnIn
  - ConnectIn link activation
linkConnected
  - Link connected, PU inactive
puPendAct
  - Link connected, PU pending activation
puActive
  - Link connected, PU active
puBusy
  - Link connected, PU busy
puPendInact
  - Link connected, PU pending deactivation
linkPendDisc
  - Pending disconnect of link
linkPendClose
  - Pending close of link station

Context

MIB: CISCO-DSPU-MIB
OID: .1.3.6.1.4.1.9.9.24.1.4.2.1.19
Type: column
Access: readonly
Status: current
Parent: dspuPuOperEntry
Table: dspuPuOperTable
Siblings: 21

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	linkReset
`2`	linkPendConnOut
`3`	linkPendConnIn
`4`	linkPendXid
`5`	linkXidNeg
`6`	linkConnOut
`7`	linkConnIn
`8`	linkConnected
`9`	puPendAct
`10`	puActive
`11`	puBusy
`12`	puPendInact
`13`	linkPendDisc
`14`	linkPendClose

Related Objects

Sibling Objects

Object	Type	Syntax	OID
dspuPuOperIndex Index of the PU entry in dspuPuOperTable.	column	Integer32	`.1.3.6.1.4.1.9.9.24.1.4.2.1.1`
dspuPuOperMaxIframe Maximum size of an I-frame that can be transmitted/received across the link between this dspuNode and the remote PU.	column	Integer32	`.1.3.6.1.4.1.9.9.24.1.4.2.1.10`
dspuPuOperLinkRetryCount Number of times that the DSPU node will attempt to activate the link between the dspuNode and the remote PU.	column	Integer32	`.1.3.6.1.4.1.9.9.24.1.4.2.1.11`
dspuPuOperLinkRetryTimeout Value (in seconds) for the delay between link activation attempts between the dspuNode and the remote PU.	column	Integer32	`.1.3.6.1.4.1.9.9.24.1.4.2.1.12`
dspuPuOperStartPu Attempt link activation with the remote PU. TRUE -> Attempt link activation with remote PU. FALSE -> Do not attempt link activation with remote PU.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.24.1.4.2.1.13`
dspuPuOperDlcType DLC type used by the dspuNode for link activation with the remote PU.	column	Enumeration	`.1.3.6.1.4.1.9.9.24.1.4.2.1.14`
dspuPuOperDlcUnit DLC unit used by the dspuNode for link activation with the remote PU.	column	Integer32	`.1.3.6.1.4.1.9.9.24.1.4.2.1.15`
dspuPuOperDlcPort DLC port used by the dspuNode for link activation with the remote PU.	column	Integer32	`.1.3.6.1.4.1.9.9.24.1.4.2.1.16`
dspuPuOperFocalPoint PU serves as a focal point for alert forwarding. TRUE -> PU serves as focal point FALSE -> PU does not serve as focal point Only an upstream PU may be defined as a…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.24.1.4.2.1.17`
dspuPuOperState Operational state of PU is either active or inactive.	column	Enumeration	`.1.3.6.1.4.1.9.9.24.1.4.2.1.18`
dspuPuOperName Name of the PU.	column	OctetString	`.1.3.6.1.4.1.9.9.24.1.4.2.1.2`
dspuPuOperStartTime Timestamp of PU activation (when ACTPU +rsp received).	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.9.9.24.1.4.2.1.20`
dspuPuOperLastStateChgTime TimeStamp of last PU state change between active<->inactive.	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.9.9.24.1.4.2.1.21`
dspuPuOperRemoteAddress Poll address, DLCI, or subscriber address associated with the remote PU.	column	OctetString	`.1.3.6.1.4.1.9.9.24.1.4.2.1.22`
dspuPuOperType PU type is either upstream or downstream.	column	Enumeration	`.1.3.6.1.4.1.9.9.24.1.4.2.1.3`
dspuPuOperRemoteMacAddress MAC address of the remote PU.	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.9.9.24.1.4.2.1.4`
dspuPuOperRemoteSapAddress SAP address of the remote PU.	column	Integer32	`.1.3.6.1.4.1.9.9.24.1.4.2.1.5`
dspuPuOperLocalSapAddress SAP address of the local PU.	column	Integer32	`.1.3.6.1.4.1.9.9.24.1.4.2.1.6`
dspuPuOperXid Upstream PU : XID that was sent to the remote PU. Dnstream PU : XID that was received from the remote PU.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.9.9.24.1.4.2.1.7`
dspuPuOperXidFmt Type of XID format used during activation of the link between this dspuNode and the remote PU.	column	Enumeration	`.1.3.6.1.4.1.9.9.24.1.4.2.1.8`
dspuPuOperWindowSize Send/Receive window size to be used across the link between this dspuNode and the remote PU.	column	Integer32	`.1.3.6.1.4.1.9.9.24.1.4.2.1.9`