dspuPuOperFocalPoint

CISCO-DSPU-MIB · .1.3.6.1.4.1.9.9.24.1.4.2.1.17
MIB view Table view

Object

column SNMPv2-TCTruthValue 
PU serves as a focal point for alert forwarding.
TRUE  -> PU serves as focal point
FALSE -> PU does not serve as focal point
              
Only an upstream PU may be defined as a focal point.
              
Downstream PUs can never be defined as a focal point;
FocalPoint is always FALSE for downstream PUs.
              
The DSPU node may define only one upstream PU as
a focal point PU.

Context

MIB
CISCO-DSPU-MIB
OID
.1.3.6.1.4.1.9.9.24.1.4.2.1.17
Type
column
Access
readonly
Status
current
Parent
dspuPuOperEntry
Table
dspuPuOperTable
Siblings
21

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dspuPuOperIndex
Index of the PU entry in dspuPuOperTable.
columnInteger32.1.3.6.1.4.1.9.9.24.1.4.2.1.1
dspuPuOperMaxIframe
Maximum size of an I-frame that can be transmitted/received across the link between this dspuNode and the remote PU.
columnInteger32.1.3.6.1.4.1.9.9.24.1.4.2.1.10
dspuPuOperLinkRetryCount
Number of times that the DSPU node will attempt to activate the link between the dspuNode and the remote PU.
columnInteger32.1.3.6.1.4.1.9.9.24.1.4.2.1.11
dspuPuOperLinkRetryTimeout
Value (in seconds) for the delay between link activation attempts between the dspuNode and the remote PU.
columnInteger32.1.3.6.1.4.1.9.9.24.1.4.2.1.12
dspuPuOperStartPu
Attempt link activation with the remote PU. TRUE -> Attempt link activation with remote PU. FALSE -> Do not attempt link activation with remote PU.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.24.1.4.2.1.13
dspuPuOperDlcType
DLC type used by the dspuNode for link activation with the remote PU.
columnEnumeration.1.3.6.1.4.1.9.9.24.1.4.2.1.14
dspuPuOperDlcUnit
DLC unit used by the dspuNode for link activation with the remote PU.
columnInteger32.1.3.6.1.4.1.9.9.24.1.4.2.1.15
dspuPuOperDlcPort
DLC port used by the dspuNode for link activation with the remote PU.
columnInteger32.1.3.6.1.4.1.9.9.24.1.4.2.1.16
dspuPuOperState
Operational state of PU is either active or inactive.
columnEnumeration.1.3.6.1.4.1.9.9.24.1.4.2.1.18
dspuPuOperFsmState
Current FSM state of the PU as follows: linkReset - Link is in reset state - not connected linkPendConnOut - Pending ConnectOut to establish link linkPendConnIn - Pending Co…
columnEnumeration.1.3.6.1.4.1.9.9.24.1.4.2.1.19
dspuPuOperName
Name of the PU.
columnOctetString.1.3.6.1.4.1.9.9.24.1.4.2.1.2
dspuPuOperStartTime
Timestamp of PU activation (when ACTPU +rsp received).
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.9.9.24.1.4.2.1.20
dspuPuOperLastStateChgTime
TimeStamp of last PU state change between active<->inactive.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.9.9.24.1.4.2.1.21
dspuPuOperRemoteAddress
Poll address, DLCI, or subscriber address associated with the remote PU.
columnOctetString.1.3.6.1.4.1.9.9.24.1.4.2.1.22
dspuPuOperType
PU type is either upstream or downstream.
columnEnumeration.1.3.6.1.4.1.9.9.24.1.4.2.1.3
dspuPuOperRemoteMacAddress
MAC address of the remote PU.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.9.9.24.1.4.2.1.4
dspuPuOperRemoteSapAddress
SAP address of the remote PU.
columnInteger32.1.3.6.1.4.1.9.9.24.1.4.2.1.5
dspuPuOperLocalSapAddress
SAP address of the local PU.
columnInteger32.1.3.6.1.4.1.9.9.24.1.4.2.1.6
dspuPuOperXid
Upstream PU : XID that was sent to the remote PU. Dnstream PU : XID that was received from the remote PU.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.24.1.4.2.1.7
dspuPuOperXidFmt
Type of XID format used during activation of the link between this dspuNode and the remote PU.
columnEnumeration.1.3.6.1.4.1.9.9.24.1.4.2.1.8
dspuPuOperWindowSize
Send/Receive window size to be used across the link between this dspuNode and the remote PU.
columnInteger32.1.3.6.1.4.1.9.9.24.1.4.2.1.9